Development of the Technique for Calculating the Ejectors with Low Entrainment Ratios

This paper presents the results of an investigation of ejectors with the low entrainment ratio. A technique for calculating the ejectors with a curvilinear axis has been developed. Comparative studies of the performance characteristics of ejectors with the rectilinear axis of the mixing chamber and the curvilinear initial section of the mixing chamber are carried out.     

Aerodynamic Design Method of Integrated Aircraft with Submerged Intake Devices and Power Plant Included into Airframe Carrying System

This paper presents a theoretically and practically grounded architecture of design methods combination. A possibility and completeness of developing integral design solutions and intensifying the design process are provided by redistribution of emphases of numerical and natural experiments.     

Fluctuations, Dissipation and Heating in the Corona

Mechanisms for the deposition of heat in the lower coronal plasma are discussed, emphasizing recent attempts to reconcile the fluid and kinetic perspectives. Structures at the MHD scales are believed to act as reservoirs for fluctuation energy, which in turn drive a nonlinear cascade process. Kinetic processes act at smaller spatial scales and more rapid time scales. Cascade-driven processes are contrasted with direct cyclotron absorption, and this distinction is echoed in the contrast between frequency and wavenumber spectra of the fluctuations. Observational constraints are also discussed, along with estimates of the relative efficiency of cascade and cyclotron processes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Beagle 2: a proposed exobiology lander for ESA's 2003 Mars Express mission.

The aim of the proposed Beagle 2 small lander for ESA's 2003 Mars Express mission is to search for organic material on and below the surface of Mars and to study the inorganic chemistry and mineralogy of the landing site. The lander will have a total mass of 60kg including entry, descent, and landing system. Experiments will be deployed on the surface using a robotic arm. It will use a mechanical mole and grinder to obtain samples from below the surface, under rocks, and inside rocks. Sample analysis by a mass spectrometer will include isotopic analysis. An optical microscope, an X-ray spectrometer and a Mossbauer spectrometer will conduct in-situ rock studies.     

测量燃烧室内温度时的热辐射修正

我们在进行某一环形燃烧室扇形形试验件的试验研究时,用热电偶测量了燃烧室内的温度分布。一般来说,热电偶不能获得与热燃气同样的温度,这是因为热电偶和周围环境有着辐射能量的交换。通常是热电偶节点向冷的壁面辐射能量。在稳态时,燃气通过对流传热向热电偶节点提供能量来平衡这一损失。这就是说,热电偶节点测得的温度较燃气的真实温度要低,这一温差就是由辐射热损失造成的。下面介绍对此热辐射损失进行修正的一个简化方法。      

Improvement of forebody/inlet integration for hypersonic vehicle

Results of a numerical (CFD) study of the influence of the forebody shape on local flow parameters at a bottom-mounted inlet entrance are presented. The free-stream Mach number is assumed to be 3.5–7.0. Some recommendations on forebody shape optimization are provided. Main characteristics of the air inlet are evaluated.     

REM measurements aboard Mir during 1995

Measurements of the South Atlantic Anomaly (SAA) made with the Radiation Environment Monitor (REM) aboard Mir from November 1994 to February 1996 are presented. During this period an increase of the SAA radiation by ≈25% is observed, which coincides with a lowering of the radio solar flux. Radio solar flux is one of the parameters controlling the earth's atmospheric distribution and with it the absorption of inner radiation belt protons forming the SAA. Due to the altitude gradient of the atmospheric density, the proton fluxes in the SAA are anisotropic (loss cone, east-west effect). The measured distribution can be accounted for by basic models.     

加权电压控制多路输出正激变换器的研究

研究了一种经济实用的多路输出DC／DC变换器的输出电压控制方法－加权电压控制，该方法可有效地改善多路输出变换器输出的稳态稳压精度和动态响应性能，对应用加权电压控制的两路输出正激变换器进行直流稳态分析，得出直流稳态等效电路模型和输出电路压数学表达式，分析了加权因子对输出电压的影响，给出了设计加权因子的原则和设计方法，通过样机实验，验证了该方法能够较好地实现多路输出稳压指标。     

Definition of Wingtip Devices Shape and Dimensions for a Subsonic Airliner

The results of flow field numerical simulation on the typical wing-body prototype of the modern DLR-F4 airliner under sub- and transonic compressible air flow are presented. Using the DLR-F4 CAD model, the effect of the wingtip end plate area and of the cant angle of a typical Whitcomb winglet is studied. The dependencies of the model lift-to-drag ratio increment on the flat wingtip end plate relative area and on the cant angle of an airfoil Whitcomb winglet are obtained. The concept of an elliptic winglet with a variable cant angle that similar to the winglet used on Airbus A350 is studied. A technique is developed for solving the multi-parameter design optimization task for the Whitcomb winglet, taking the maximum lift-to-drag ratio of the wing as a criterion for optimization.     

Order out of Randomness: Self-Organization Processes in Astrophysics

Self-organization is a property of dissipative nonlinear processes that are governed by a global driving force and a local positive feedback mechanism, which creates regular geometric and/or temporal patterns, and decreases the entropy locally, in contrast to random processes. Here we investigate for the first time a comprehensive number of (17) self-organization processes that operate in planetary physics, solar physics, stellar physics, galactic physics, and cosmology. Self-organizing systems create spontaneous “order out of randomness”, during the evolution from an initially disordered system to an ordered quasi-stationary system, mostly by quasi-periodic limit-cycle dynamics, but also by harmonic (mechanical or gyromagnetic) resonances. The global driving force can be due to gravity, electromagnetic forces, mechanical forces (e.g., rotation or differential rotation), thermal pressure, or acceleration of nonthermal particles, while the positive feedback mechanism is often an instability, such as the magneto-rotational (Balbus-Hawley) instability, the convective (Rayleigh-Bénard) instability, turbulence, vortex attraction, magnetic reconnection, plasma condensation, or a loss-cone instability. Physical models of astrophysical self-organization processes require hydrodynamic, magneto-hydrodynamic (MHD), plasma, or N-body simulations. Analytical formulations of self-organizing systems generally involve coupled differential equations with limit-cycle solutions of the Lotka-Volterra or Hopf-bifurcation type.