The role of hydration and radiation quality in the induction of DNA damage--chemical aspects.

The mutagenic and lethal effects of ionising radiation are thought to result from chemical modifications induced within DNA. This DNA damage is significantly influenced by the chemical environment and the radiation quality (LET). Water closely associated with the DNA and its immediate environment is involved in the early chemical pathways which lead to the induction of DNA damage and is reflected in the cellular radiosensitivity. For instance, hydration of DNA influences hole migration leading to its localisation at guanine. Changes in the radiation quality are discussed in terms of the complexity of the radical clusters produced. It is inferred that at higher LET, the influence of the chemical environment (O2 etc) decreases with respect to DNA damage and cellular radiosensitivity. It is therefore important to include these effects of environment of the DNA upon the early chemical pathways in models of radiation action.     

Robust Kalman filter design for predictive wind shear detection

Severe low-altitude wind shear is a threat to aviation safety. Newly developed airborne sensors measure the radial component of wind along a line directly in front of an aircraft. The authors use optimal estimation theory to define a detection algorithm to warn of hazardous wind shear from these sensors. To achieve robustness, a wind shear detection algorithm must distinguish threatening wind shear from less hazardous gustiness, despite variations in wind shear structure. Statistical analysis methods to refine wind shear detection algorithm robustness are presented. Computational methods predict the ability to warn of severe wind shear and avoid false warning. Comparative capability of the detection algorithm as a function of its design parameters is determined, identifying designs that provide robust detection of severe wind shear     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

Role of BIT in support system maintenance and availability

The role of built in test (BIT) in electronic systems has grown in prominence with the advances in system complexity and concern over maintenance lifecycle costs of large systems. In an environment where standards drive system designs (and provide an avenue for focused advancement in technology), standards for BIT are very much in an evolutionary state. The reasons for advancing the effectiveness of BIT include reduced support overhead, greater, confidence in operation, and increased system availability. The cost of supporting military electronic systems (avionics, communications, and weapons systems) has driven much of the development in BIT technology. But what about the systems that support these end items that contain test and measurement instrumentation - such as automatic test equipment (ATE), simulators and avionics development suites? There has also been a beneficial effect on the maintenance and availability of these systems due to the infusion of BIT into their component assemblies. But the effect has been much more sporadic and fragmented. This paper looks at the state of BIT in test and measurement instruments, explain its affect on system readiness, and present ideas on how to improve BIT technologies and standards. This will not provide definitive answers to BIT development questions, since the factors that affect it are specific to the instrument itself. The topics covered in this paper are: definitions of built-in test, instrument BIT history, importance of BIT fault coverage and isolation in support systems, overview of BIT development process issues that limit the effectiveness of BIT Standards related to instrument BIT, making BIT more effective in support system maintenance and availability and conclusions.     

Chromosome instability of HPRT-mutant subclones induced by ionising radiation of various LET.

The induction of HPRT-mutations and survival of Chinese hamster cells (line B11ii-FAF28, clone 431) were studied after irradiation by 4He and 12C-ions of various LET (20-360 keV/micrometers), produced by the U-200 heavy ion accelerator. The RBE increases with LET up to the maximum at 100-200 keV/micrometers and then decreases. Cytogenetic analysis was performed on the HPRT-mutant subclones selected from unirradiated Chinese hamster V-79 cells and from HPRT-mutant subclones that arose after exposure to gamma-rays, 1 GeV protons and 14N-ions (LET-77 keV/micrometers), produced by the synchrophasotron and the U-400M heavy ion accelerator. Slow growing mutant subclones were observed. The cytogenetic properties of individual clones were highly heterogeneous and chromosome instability was observed in both spontaneous and radiation-induced mutants. Chromosome instability was highest among spontaneous mutants and decreased with increasing LET.     

Design of the TRIO system-on-chip for aerospace

Several design and testing aspects of the TRIO smart sensor data acquisition chip, developed by JHU/APL for NASA spacecraft applications are presented. TRIO includes a 10 bit self-corrected analog-to-digital converter (ADC), 16/32 analog inputs, a front end multiplexer with selectable aquisition time, a current source, memory, serial and parallel bus, and control logic. So far TRIO is used in many missions including Contour, Messenger, Stereo, Pluto, and the generic JPL X2000 spacecraft bus.     

Large angle pitch attitude maneuver of a satellite using solarradiation pressure

The force exerted by the solar radiation, though very small in magnitude, produces significant effects, especially in the case of high altitude satellites. The solar radiation pressure represents one freely available environmental force that may be put to use for various purposes. This may lead to enhancement of the life of the satellite since it consumes a very nominal amount of on-board energy. The advantages offered by the solar radiation pressure have drawn the attention of several researchers. Various controllers were proposed for many space missions, particularly for attitude control and stabilization of satellites. A controller for achieving large angle pitch attitude maneuver is described. The proposed control law is very simple in its form and requires a minimum number of on-board computations. Varieties of cases are tried and the effect of various parameters is studied     

The SOHO CELIAS/SEM EUV database from SC23 minimum to the present

The SOHO Solar EUV Monitor has been in operation since December 1995 onboard the SOHO spacecraft. This instrument is a highly stable transmission grating solar extreme ultraviolet spectrometer. It has made nearly continuous full disk solar irradiance measurements both within an 8 nm bandpass centered at 30.4 nm and throughout the 0.1 to 50 nm solar flux region since launch. The 30.4 nm flux, the 0.1 to 50 nm flux and the extracted soft X-ray (0.1 to 5 nm) flux are presented and compared with the behavior of solar proxies.     

An energy management system to improve electric vehicle range andperformance

An electric vehicle (EV) energy management system (EMS) developed to accurately predict and extend the usable driving range and the life of the battery pack is discussed. The EMS monitors and records battery state of charge, vehicle performance, power consumption of key components, and driver's actions. Convenient drive inputs in conjunction with memorized energy consumption profiles allow accurate prediction of driving range and selection of appropriate recharging profiles. EV range extension is accomplished by identifying inefficient use of energy, resulting in EMS modification of energy usage by offending subsystems or EMS suggestion to the driver of improved driving habits or vehicle use. Factors affecting the accuracy of range prediction and the amount of range extension are described     

Distributed flight control system using fiber distributed datainterface (FDDI)

The design of fault-tolerant distributed control systems is discussed. The application described is a generic flight control system (FCS) for a fighter aircraft. The system is designed for high redundancy and expandability to meet various requirements. The communication network is based on the fiber distributed data interface (FDDI), which provides a high level of electromagnetic interference resistance and reliability. The choice of fiber optic media also provides an extremely high bandwidth and tremendous growth capability for future communications needs. This study is not specific to FDDI or flight control systems. The methods and configurations presented should be applicable to many real-time control implementations