Nonlinear analysis of hydrodynamic instability in laminar flames—II. Numerical experiments

We consider a nonstationary nonlinear integrodifferential equation describing the evolution of a disturbed plane flame front. The following two-dimensional problems are solved numerically: (i) The formation of a wrinkled noncellular laminar flame front under conditions of spontaneous hydrodynamic instability. (ii) The formation of a turbulent cellular flame front under conditions of spontaneous diffusional-thermal instability. (iii) The formation of a turbulent wrinkled-cellular flame front under conditions of spontaneous hydrodynamic and diffusional-thermal instability. We compute the flame front velocity in laminar and turbulent propagation.     

Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Changes in the loco-regional Cerebral Blood Flow (r.C.B.F.) during a simulation of weightlessness.

Experiments of prolonged bedrest in antiorthostatic position are conducted in order to simulated cardio-circulatory modifications observed in weightlessness. Until now, no studies of r.C.B.F. have been effected in these conditions. Six young, healthy volunteers (average age 23.8) were placed in strict bedrest and in antiorthostatic position -4 degrees for 7 days. The r.C.B.F. measurements were studied by 133Xe inhalation method using a 32 detectors system. Studies were made first in basal conditions, then between the 6th and 12th hr, and finally between the 72nd and the 78th hr after the beginning of the experiment. Three of the subjects received 0.450 mg of Clonidine daily during the experiment. In the subjects having taken no Clonidine, we observed a constant increase in r.C.B.F. (12, 17 and 16% respectively) in the first 12 hr; at the 72nd hour, all values had returned to basal state. This findings agrees with the well known notion of a rapid correction of hemodynamic disturbances observed in the first days of weightlessness. In the subjects treated with Clonidine, the increase of r.C.B.F. did not occur. Several mechanisms of action are possible; the Clonidine affecting either the heart by inhibiting volemic atrial receptors or the brain by direct vasoconstriction.     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

Lyapunov stability designs for switching regulator/low-pass filtersystem

The second method of Lyapunov is employed to determine quantitatively accurate criteria for asymptotic stability of the fourth-order switching-regulator/low-pass filter system. Modeling the regulator as a linearized negative resistance, this analysis provides alternative stability relationships to those found in the literature and also reveals the limitations of the Routh stability criterion. Design examples are included which ensure system stability and reduce the amplitude of the filter resonant peak (audio-susceptibility constraint)     

Simulation of DC spacecraft power systems

A modular state-variable approach is presented for DC spacecraft power system modeling and simulation. Each modular component is treated as a multiport network, and a state model is written with the port voltages as the inputs. The state model of a component is solved independently of the other components, using its state transition matrix. The state variables of each component are updated, assuming that the inputs are constant. Network analysis principles are then utilized to calculate the component inputs     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

Electrical power distribution on space based radar satellites

The radar payload on a space-based radar (SBR) satellite could require tens of kilowatts of power distributed to many small loads over a large area. This poses special problems for the power distribution and control system (PDCS). A study that examined the power requirements of an SBR spacecraft is reported. A baseline prime power system, generating about 30 kW, was derived. The proposed distribution network would transmit 240 V at 20 kHz. The voltage would be downconverted in one converter for about 100 transmit/receive modules. The design considerations are discussed, and the baseline PDCS is described     

Physical interpretation of interdisciplinary solar/interplanetary observations relevant to the 27–29 June 1980 SMY/STIP event no. 5

A sequence of six well defined interplanetary structures (magnetic clouds) was identified in the solar wind and magnetic field measurements of Helios-1 from 29 June-01 July, 1980. (location 0.64–0.67 AU, C. Long. ～165°, C. Lat. ～5.8°). These structures were characterized by a large northward directed solar wind flow; by well defined directional discontinuities of mainly the ‘tangential-type’ at their beginnings and ends; by some increase in proton and by very pronounced increases in alpha particle number densities - each accompanied by sudden temperature decreases (or in one case by an increase); by some times an increase in magnetic field strength and by values of Nα/Np typical of the inner solar atmosphere. These structures are suggested to have been ejections from a succession (27–29 June, 1980) of Type II producing flares in Hale Region 16923 which coronagraph and X-ray (GOES) data indicate constituted a family of transient producing events. Only two interplanetary shocks were identified in the relevant Helios-1 records. It is suggested on the basis of observations of the directionality of certain of the flare related Type II bursts that some of these shocks could have been missed by the spacecraft. This implies that, in the absence of directional information, correlation of an observed interplanetary shock wave with a solar Type II burst may not always lead to a unique result.