Space Interferometry Mission instrument model and astrometric performance validation

The Space Interferometry Mission (SIM), performed very accurate astrometric measurements to measure the positions of stars using a 10 m baseline optical interferometer. The lack of signal from the science targets precludes using the star as a feedback signal to control the science interferometer delay line. In order to solve this problem SIM uses pathlength feed forward (PFF) control of the science interferometer. In the case of controlling the science interferometer optical path, the information to position the science delay line comes from a combination of internal metrology, external metrology, and guide interferometer measurements. The accuracy of the internal and external metrology measurements and the guide interferometer measurements are important for the quality of the feed forward signal and also for the ultimate astrometric performance of the instrument. An instrument model of SIM has been built to evaluate optical performance and to emulate various observational scenarios. The effect of averaging methods to reduce metrology cyclic error and the viability of on-orbit calibration maneuvers are studied. The model consists of a real-time dynamics formulation of the spacecraft and a real-time attitude control system. Simulation results investigate the sensitivity of the feed forward signal to the various error sources and time-varying terms.     

The beginning of cosmic ray astrophysics

A short history of the beginning of cosmic ray (CR) astrophysics is considered: from the hypothesis on CR origin as a result of Supernova explosions in the Metagalaxy, to a model of solar origin of CR, galactic origin based on the stochastic mechanism of charged particle acceleration in interstellar space, to extragalactic and hierarchical models of CR origin, as well as galactic CR origin taking into account radio-astronomical data. We consider also the first balloon results on the chemical contents of primary CR (especially of the contents Li, Be, B), important for any model of CR origin. Investigations of the injection problem, CR drift and diffusion acceleration by shock waves, and CR generation in Supernova remnants were also important steps in the beginning of CR astrophysics.     

Development of in-situ Space Debris Detector

Due to high relative velocities, collisions of spacecraft in orbit with Space Debris (SD) or Micrometeoroids (MM) can lead to payload degradation, anomalies as well as failures in spacecraft operation, or even loss of mission. Flux models and impact risk assessment tools, such as MASTER (Meteoroid and Space Debris Terrestrial Environment Reference) or ORDEM (Orbital Debris Engineering Model), and ESABASE2 or BUMPER II are used to analyse mission risk associated with these hazards. Validation of flux models is based on measured data. Currently, as most of the SD and MM objects are too small (millimeter down to micron sized) for ground-based observations (e.g. radar, optical), the only available data for model validation is based upon retrieved hardware investigations e.g. Long Duration Exposure Facility (LDEF), Hubble Space Telescope (HST), European Retrievable Carrier (EURECA). Since existing data sets are insufficient, further in-situ experimental investigation of the SD and MM populations are required. This paper provides an overview and assessment of existing and planned SD and MM impact detectors. The detection area of the described detectors is too small to adequately provide the missing data sets. Therefore an innovative detection concept is proposed that utilises existing spacecraft components for detection purposes. In general, solar panels of a spacecraft provide a large area that can be utilised for in-situ impact detection. By using this method on several spacecraft in different orbits the detection area can be increased significantly and allow the detection of SD and MM objects with diameters as low as 100 μm. The design of the detector is based on damage equations from HST and EURECA solar panels. An extensive investigation of those panels was performed by ESA and is summarized within this paper. Furthermore, an estimate of the expected sensitivity of the patented detector concept as well as examples for its implementation into large and small spacecraft are presented.     

A New Population of the Cusp Suprathermal Protons Formed at Mid-Altitudes: INTERBALL-2 Measurements

A new population of dispersed suprathermal ions descending into the ionosphere is discovered in the cusp region from theINTERBALL-2 measurements at altitudes of 2–3R _E. The proton energies of the population are below the low energy cut-off of the main dispersed proton population of the magnetosheath origin, and its intensity and density are also much lower. For IMF B _z 2 nT the region of the population observations is located partly coincident with (or sometimes poleward from) the main proton population of the cusp proper. The pitch-angle velocity dispersion in the population during a 2-min satellite rotation manifests itself as a typical pitch-angle V together with a velocity dispersion due to poleward convection. The satellite passes chosen for the detailed analysis and modeling lay approximately along the cusp/cleft band from afternoon till prenoon MLT sectors, thus emphasizing the pitch-angle dispersion role with respect to the dispersion due to convection. This allows one to observe the suprathermal proton population during several tens of minutes over the MLT range of 3 h around noon, i.e., similarly to the MLT extension of the cusp proper. A remarkable space/time stability of this new population is due to its low velocity (tens of km/s) and/or velocity diffusion in the flux tubes of the cusp proper. We have performed both backward tracing of proton trajectories in the Tsyganenko-96 model, and kinetic modeling of the kinematic variations of the distribution function for protons along their way from the bi-Maxwellian source in the form of a heating wall till the satellite. The parameters of the model were adjusted to the observed energy–time spectrograms. They consistently indicate the origin of the descending suprathermal proton population at intermediate altitudes of 5R _E, i.e., within cusp flux tubes but well below the magnetopause. Some published measurements from the POLAR satellite in the cusp region at altitudes of 4–5R _E seem to be consistent with the supposition of crossing the source region of this population, variable in space and time (though these measurements were interpreted in a different manner).     

To a problem of aircraft control system design with given dynamic parameters

In the design of an aircraft at the stage of selecting its geometrical parameters, a method is proposed for evaluating the performance capabilities of manual control to ensure the quality of a given flight stabilization mode. The attainability of the given aircraft-pilot dynamic properties is evaluated by a frequency-domain method for permissible values of the aircraft and the pilot model parameters. The quality of the manual control for the longitudinal motion of the aircraft is evaluated.     

Space development: social and political implications

Far-reaching social and political issues are implicit in any discussion of large-scale space development. This Viewpoint argues that the evolution of appropriate political institutions to deal with these issues is likely to be at least as important as the development of new technology. If large-scale space development is to take place, global international cooperation will be essential and such cooperation will have to be underpinned by enhanced institutional and legal structures. In the shorter term, an appropriate institutional response may be the creation of a World Space Agency. However, in the longer term, we should probably view a world space programme as falling within that class of global concerns that would be most appropriately managed by a federal world government.     

System aspects and transmission impairments of active phased arrays for satellite communications

The communications link and system aspects of active phased arrays that are used in multiple-beam satellite systems are assessed through measurements and analysis. Three link parameters are investigated and their effects on the overall carrier-to-interference ratio (CIR) are quantified. The first parameter is the intermodulation components that are generated at the nonlinear amplifier outputs and contribute to well-formed interference in the far-field radiation of the array. The second is the bit-error ratio (BER) degradation due to the multi-carrier operation of the active array. Measurement results are shown to demonstrate this effect. The third link parameter is the cochannel interference caused by frequency reuse in multiple-beam systems. The paper starts by reviewing early developments of phased arrays for multiple-beam satellite communications applications. A key component in these developments is the modular monolithic microwave integrated circuit (MMIC) beam-forming matrices that generate a number of simultaneous and independently digitally controlled beams     

A system of autonomous navigation and orientation for satellites based on virtual measurements of zenith distances of stars

An onboard astronomical system is suggested, based on the developed method using virtual measurements of zenith distances of stars. Two algorithms of the method are described, their theory is given, and statistical results of the system’s simulation are presented.     

Elimination of relative secular drift of orbits of two satellites caused by polar oblateness of the Earth

A method of elimination of relative secular drifts in satellite formations is suggested for the case of influence of a perturbation due to polar oblateness of the Earth. The method is applied to eliminate relative secular drifts in the case when a satellite is controlled using an engine mounted along its orientation axis (the satellite is supplied with a passive magnetic attitude control system) and with the help of a solar sail installed on one of the satellites. Analytical results are confirmed by numerical simulation.