Identification of Rotating Assembly Inertial and Bearing Parameters

The problem of estimating the state of a turbopump rotating assembly and identifying unknown products of inertia and unknown bearing parameters is considered. A linearized, extended Kalman filtering approach has been used and found to be successful for both state estimation and parameter identification in an inherently nonlinear problem. The input data was simulated Bently test data which was obtained from a verified 12-dimensional state-space model and was compared with real Bently test data obtained from NASA. The results prove the feasibility of using this model and this type of test data to obtain the hidden parameters of a typical turbopump rotating assembly. This method should lead to improved performance by allowing improved balancing of the rotor and giving improved knowledge of the bearing reactions.     

用推力矢量控制技术改进超声速飞行器空气动力特性

为了提高某超声速飞机的空气动力学效率和机动性能,本文采用低阶的三维板块法和DATCOM半经验公式,在亚声速和超声速条件下,对不同马赫数和迎角情况计算了基本气动外形的飞机空气动力学特性、表面压力分布以及最大升力。此外还开发了一套软件以实现由引进的先进气动操纵面（如鸭翼等）控制的二维推力矢量技术。试验结果表明：气动操纵面结合推力矢量技术能够产生足够的低头力矩,且有能力满足高度机动飞行时的稳定性要求。此外,不论是亚声速还是超声速飞行,气动操纵面均可以提高气动效率5％-6％。     

有限平面上圆口径辐射场的数值分析

计算由TE₁₁模激励的圆波导末端开口所形成的圆口径天线的辐射场.首先利用等效原理和矩量法计算嵌在无限大金属板上圆口径的等效磁流分布,允许圆波导中有任意多个高次模式存在,利用傅里叶变换法求得其辐射方向图,然后把该辐射场作为有限接地板边缘的入射场,利用几何绕射理论(GTD)计算有限接地板对圆口径方向图的贡献,其中在焦散区及接近焦散区区域采用等效磁流法计算有限接地板的影响,给出计算公式及计算例子,部分结果得到了文献的验证.     

一种基于多维空间超球体的快速聚类算法

提出了一种基于多维空间超球体的快速聚类算法。这种算法结合密度聚类和层次聚类两种思想。首先利用密度聚类方法将小范围内的数据对象聚合成超球体,然后再按照层次聚类中的凝聚思想,根据超球体之间的位置关系产生最终聚类。实验表明,该算法对于数值型数据集不仅在效率、噪声敏感性等方面均有较好的表现,同时还可以通过诸如“双环测试”等带有刁难性的特殊测试集。以往,常常简单的以距离来刻画的数据间“相似性”,而所提出的快速聚类算法则改由超球体之间连接的紧密程度来描述这种性质。实验表明,这种修改使得算法的性能得到了很好的改善。     

A Comparison of Noncoherent and Coherent MTI Improvement Factors

An analysis based on statistical considerations and Monte Carlo simulations indicates that a noncoherent moving target indicator (MTI) using a linear envelope detector differs from one using a square law envelope detector. The square law envelope detector is usually described in the literature because of ease of analysis, and it is commonly stated or implied that the results are the same for the two cases because of the similar spectral characteristics of the detectors. A comparison is made between the two noncoherent MTIs and the coherent MTI in terms of clutter attenuation and MTI improvement factors.     

Distributed filtering using set models

A distributed filtering algorithm using set models with confidence values is derived. No noise distribution statistics are needed. The only information required is the confidence values from which the modeling and measurement errors and the initial values are obtained. Therefore, the algorithm has great potential for real-world applications     

A Comparison of Expected Flight Times for Intercept and Pure Pursuit Missiles

The relative merits of intercept and pure pursuit homing are investigated by comparing the expected flight times to a nonmaneuvering target. The analysis is performed for the initial target heading angle uniformly distributed with arbitrary mean and variance. Two specific examples illustrate that intercept homing holds little statistical advantage over pure pursuit homing except when the speed advantage of the missile is very small.     

MESSENGER Mission Overview

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft, launched on August 3, 2004, is nearing the halfway point on its voyage to become the first probe to orbit the planet Mercury. The mission, spacecraft, and payload are designed to answer six fundamental questions regarding the innermost planet: (1) What planetary formational processes led to Mercury’s high ratio of metal to silicate? (2) What is the geological history of Mercury? (3) What are the nature and origin of Mercury’s magnetic field? (4) What are the structure and state of Mercury’s core? (5) What are the radar-reflective materials at Mercury’s poles? (6) What are the important volatile species and their sources and sinks near Mercury? The mission has focused to date on commissioning the spacecraft and science payload as well as planning for flyby and orbital operations. The second Venus flyby (June 2007) will complete final rehearsals for the Mercury flyby operations in January and October 2008 and September 2009. Those flybys will provide opportunities to image the hemisphere of the planet not seen by Mariner 10, obtain high-resolution spectral observations with which to map surface mineralogy and assay the exosphere, and carry out an exploration of the magnetic field and energetic particle distribution in the near-Mercury environment. The orbital phase, beginning on March 18, 2011, is a one-year-long, near-polar-orbital observational campaign that will address all mission goals. The orbital phase will complete global imaging, yield detailed surface compositional and topographic data over the northern hemisphere, determine the geometry of Mercury’s internal magnetic field and magnetosphere, ascertain the radius and physical state of Mercury’s outer core, assess the nature of Mercury’s polar deposits, and inventory exospheric neutrals and magnetospheric charged particle species over a range of dynamic conditions. Answering the questions that have guided the MESSENGER mission will expand our understanding of the formation and evolution of the terrestrial planets as a family.     

新电位移边界条件下的压电介质断裂问题

应用边界元法,并结合一种特殊的复变函数基本解,研究了压电介质的断裂问题。由于该基本解完全遵循本构方程没有对电位移边界作假设,所以结论同非穿透性裂纹假设的结果有较大差异。通过计算表明,外加力载荷不但会引起裂纹尖端应力奇异性,也会引起电场奇异性,同样,外加电压也会引起裂纹尖端应力奇异性。