Impact of agents mixing velocity in diffusion flame on nitric oxide emission

The results of analyzing an impact of mixing velocity on the stoichiometric surface of a laminar diffusion methane-air flame on nitric oxides formation are presented. The conclusion about the nonlinear and steady decrease of nitric oxides emission at the increase of mixing velocity is made. The relationship is presented, showing that at the expense of non-equilibrium effects it is possible to provide a significant decrease of nitric oxides emission in diffusion combustion.     

Three-dimensional numerical studies of a jet airflow around the duct platforms of the turbine nozzle clusters

This paper presents the results of three-dimensional numerical studies of hydrodynamics and heat exchange on the models of flat plates in the jet airflow. These results are compared with the experimental data. A three-dimensional model for determining the thermal condition of the nozzle clusters in the conjugated formulation is proposed. Also presented are the data on optimization of the system used for the jet airflow around the duct platforms of the nozzle clusters.     

Local fracture of the burning solid propellant

The problem of fracture mechanics for the solid propellant deteriorated by a crack-shaped cavity, the surface of which burns is considered. It is assumed that the propellant reagents are uniformly distributed in the solid phase while the combustion products are gaseous. The sufficient condition for the “combustion -fracture” stability regime is obtained.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

Solar activity dependence of total electron content derived from GPS observations over Mbarara

Vertical total electron content (VTEC) observed at Mbarara (geographic co-ordinates: 0.60°S, 30.74°E; geomagnetic coordinates: 10.22°S, 102.36°E), Uganda, for the period 2001–2009 have been used to study the diurnal, seasonal and solar activity variations. The daily values of the 10.7 cm radio flux (F_10.7) and sunspot number (R) were used to represent Solar Extreme Ultraviolet Variability (EUV). VTEC is generally higher during high solar activity period for all the seasons and increases from 0600 h LT and reaches its maximum value within 1400 h–1500 h LT. All analysed linear and quadratic fits demonstrate positive VTEC-F_10.7 and positive VTEC-R correlation, with all fits at 0000 h and 1400 h LT being significant with a confidence level of 95% when both linear and quadratic models are used. All the fits at 0600 h LT are insignificant with a confidence level of 95%. Generally, over Mbarara, quadratic fit shows that VTEC saturates during all seasons for F_10.7 more than 200 units and R more than 150 units. The result of this study can be used to improve the International Reference Ionosphere (IRI) prediction of TEC around the equatorial region of the African sector.     

The conundrum of software estimation models

There are many sophisticated models and methods for estimating the size, cost, and schedule of software projects. However, the ability to accurately estimate software cost, size, or schedule is still dubious. In general, the predictive accuracy of models for estimating software development cost and schedule has not been shown to be better than “within 25 percent of actual cost or schedule, about one half of the time”, especially for Department of Defense software efforts. The same is true for software size estimating models and methods, although there are some studies that have shown superior results. For software support (or maintenance) cost estimation, no model has been demonstrated to be accurate. This paper presents a summary of efforts performed to date which demonstrate the accuracy (or lack thereof) of software models. The results of several studies in the areas of software development cost and schedule estimation, size estimation, and support cost estimation are presented to show what these models can and cannot do. Some ideas for improvement are also presented, including the results of some studies which may lead to a resolution of the accuracy conundrum which currently exists     

Embedded information system re-engineering

Currently fielded embedded information systems face readiness challenges imposed by evolving missions and extended service lifespans. The ability to overcome these challenges is constrained by such factors as shrinking budgets, limited computational capacity and diminished manufacturing sources effects that impact both hardware and software options. Wholesale redevelopment is often cost prohibitive, particularly since large portions of embedded applications continue to fulfil mission requirements. Solutions must preserve prior investments while providing efficient pathways for continued technology refresh. A technology solution for affordable modernization of legacy system software is being development. The Embedded Information System Re-engineering (EISR) project is developing an automation-assisted JOVIAL-to-C re-engineering capability that permits simultaneous modernization of both the structure and source language of legacy embedded applications. Engineers will be able to apply the proven labor-saving visualization and analysis features of modern CASE tools to legacy JOVIAL applications. EISR will thus allow the DoD to recapture previous investments in proven legacy algorithms and mission capabilities while permitting the full exploitation of COTS economies of scale. This paper describes in brief the goals and objectives of the EISR project, and provides the current status of the EISR capability.     

Markets and Models for Large-Scale Courseware Development

Computer-aided instruction (CAI) has not achieved widespread use, even though experimental results have been promising, because of a complex of technical, economic, and social factors. The problems these factors produce might be overcome if a major ?market success? could be achieved with CAI systems. One potentially high-volume market, having probably a lower resistance to profound innovation than other sectors of education, is the junior college. To achieve a market success which would catalyze public and private investment to sustain the growth and dissemination of CAI requires technical solutions in the areas of hardware, software, and courseware. Courseware is a term designating the applications programs for CAI systems and associated textual, audio-visual, and other materials of instruction. Two different approaches to the production of courseware and their underlying philosophies are discussed and contrasted. The extent to which these different models of courseware design and development might lead toward the goal of mass dissemination is highlighted.     

Optimum Space-Time Signal Processing and Parameter Estimation

A general-decision theoretic procedure for the design of optimum space-time signal processors is developed. Each antenna element output is processed separately before summing. The parameters for groups of 1, 2, . . . , n targets are estimated, followed by hypothesis testing to decide which group is most likely. Block diagrams for one-and two-target estimators of angular location are derived. The technique can be extended to more than two targets.     

Some regularities in the relationship of limb coronal mass ejections with eruptive prominences and post-eruptive arcades

A positive correlation is shown to exist between the angular sizes (in the sky plane) of eruptive prominences and/or post-eruptive arcades and coronal mass ejections (CMEs) associated with them. New regularities are found that characterize the relationship between the latitude of eruptive prominences (post-eruptive arcades) and the latitude position of CMEs associated with them in the field of view of a coronagraph. An interpretation of these regularities is given.