Cell inactivation, repair and mutation induction in bacteria after heavy ion exposure: results from experiments at accelerators and in space.

To understand the mechanisms of accelerated heavy ions on biological matter, the responses of spores of B. subtilis to this structured high LET radiation was investigated applying two different approaches. 1) By the use of the Biostack concept, the inactivation probability as a function of radial distance to single particles' trajectory (i.e. impact parameter) was determined in space experiments as well as at accelerators using low fluences of heavy ions. It was found that spores can survive even a central hit and that the effective range of inactivation extends far beyond impact parameters where inactivation by delta-ray dose would be effective. Concerning the space experiment, the inactivation cross section exceeds those from comparable accelerator experiments by roughly a factor of 20. 2) From fluence effect curves, cross sections for inactivation and mutation induction, and the efficiency of repair processes were determined. They are influenced by the ions characteristics in a complex manner. According to dependence on LET, at least 3 LET ranges can be differentiated: A low LET range (app. < 200 keV/micrometers), where cross sections for inactivation and mutation induction follow a common curve for different ions and where repair processes are effective; an intermediate LET range of the so-called saturation cross section with negligible mutagenic and repair efficiency; and a high LET range (>1000 keV/micrometers) where the biological endpoints are majorly dependent on atomic mass and energy of the ion under consideration.     

The effect of radiation on the long term productivity of a plant based CELSS.

Mutations occur at a higher rate in space than under terrestrial conditions, primarily due to an increase in radiation levels. These mutations may effect the productivity of plants found in a controlled ecological life support system (CELSS). Computer simulations of plants with different ploidies, modes of reproduction, lethality thresholds, viability thresholds and susceptibilities to radiation induced mutations were performed under space normal and solar flare conditions. These simulations identified plant characteristics that would enable plants to retain high productivities over time in a CELSS.     

Direct Energy Transfer for High Efficiency Photovoltaic Energy Systems Part I: Concepts and Hypothesis

This two-part paper presents a comprehensive comparative study on parallel power processing (PPP) and standard schemes in dc/dc converters for photovoltaic (PV) energy systems. It is demonstrated how PPP can improve direct energy transfer (DET), which results in PV systems operating at higher voltage and efficiency. Discussions of the concepts, hypotheses and computer simulations are presented in Part I. Part II provides the experimental results, which confirm the validity of the analysis and simulations.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP "Sharc" and IMU parameters are forecasted.     

A technique for selecting a rational variant of a multifunctional aircraft system

A technique for selecting a rational variant of a multifunctional aircraft system using the analytic hierarchy process is proposed and a solution of a practical problem is presented.     

The results of flight tests of an attitude control system for the Chibis-M microsatellite

The attitude control system of the Chibis-M microsatellite is described. Results of flight experiments on damping the initial angular velocity (made using magnetorquers) are considered, as well as stabilization in the orbital referece frame, and orientation of solar arrays toward the Sun using reaction wheels. The operation of algorithms of satellite attitude determination on sunlit and shadow segments of the orbit is also under study. The general logic of operation of the attitude control system in automatic mode is presented and discussed.     

Nonlinear target enhancement for the hostile nuclear environment

A necessary requirement of a strategic defence system is the detection of incoming nuclear warheads in an environment that may include nuclear detonations of undetected or missed target warheads. A computer model which simulates incoming warheads as distant endoatmospheric targets is described. A model of the electromagnetic noise expected in the nuclear environment is developed. Predicted atmospheric effects are also included. The ability of nonlinear image enhancement algorithms to their ability to suppress the noise and atmospheric effects of the nuclear environment is examined. These algorithms are then tested, using the combined target and noise models, and evaluated in terms of noise removal and their ability to resolve closely spaced targets     

Implementation and convergence considerations of a linearlyconstrained adaptive array

O.L. Frost (1972) introduced a linearly constrained optimization algorithm that allows certain main beam properties to be preserved while good cancellation is attained. An open-loop implementation of this algorithm is developed. This implementation is shown to be equivalent to the technique developed by C.W. Jim (1977), L.J. Griffiths and C.W. Jin (1982), and K.M. Buckley and L.J. Griffiths (1982) whereby the constrained problem is reduced to an unconstrained problem. Analytical results are presented for the convergence rate when the sampled matrix inversion (SMI) or Gram-Schmidt (GS) algorithm are employed. It has been previously shown that the steady-state solution for the optimal weights is identical for both constrained and reduced unconstrained problems. It is shown that if the SMI or GS algorithm is employed, then the transient weighting vector solution for the constrained problem is identical to the equivalent transient weight vector solution for the reduced unconstrained implementation     

Comments, with reply, on `Lyapunov stability designs for switchingregulator/low-pass filter system' by M.L. Brooks

Erroneous conclusions reached in the original paper (see ibid., vol.25, no.5, p.602-10, Sept. 1989) concerning the applicability of the Rough criterion in studying the stability of fourth-order linear systems and its relationship with Lyapunov's stability tests are corrected. A brief review of relevant theory is presented, and faults in the analysis that led to these conclusions are identified. The relationship between the Routh criterion and the second method of Lyapunov is reviewed, and a correct application of the Lyapunov method is presented. It is shown that contrary to the conclusions of the paper discussed, these two methods are equivalent for any linear, time-invariant system, including the fourth-order system in question