钛合金近β锻造研究

 提出钛合金塑性变形中一种新的热加工方法——钛合金近β锻造。试验和生产实践表明,它能在不影响合金塑性、不降低热稳定性的条件下,显著地提高合金的高温性能、低周疲劳性能和断裂韧性、使钛锻件具有最好的塑性、热强性和断裂韧性的综合。新工艺适用于（α+β）型合金,可应用于α型和近α型合金。     

高超音速化学非平衡钝劈绕流数值计算

 自1970年Davis提出粘性激波层方法以来,用数值方法求解高超音速轴对称钝体绕流问题国内外已做了大量工作,但至今仍未见到关于平面问题的计算结果。对于平面问题,虽然方程在形式上比轴对称简单,但由于二维效应,激波层较厚,用文献[2]的方法向下游区推进有困难。另外,在驻点线上采用极限关系式虽能克服方程的奇性,但驻点解对流向步长Δξ有依赖。     

共面变速拦截对策的一个统一的近似反馈解

 本文运用微分对策理论研究了战术导弹与目标飞机之间的共面变速拦截问题,采用强迫奇异摄动方法求得了统一的近似反馈制导控制规律。选用实际空气动力数据的算例表明这个次最优制导控制规律是有效的。     

民机数据总线信号综合测试仪

介绍的民机数据总线信号测试仪综合了当前民机上主要采用的ARINC429、ARINC419、CSDB和RS232等数字式航空数据总线规范的接口，具有和这些总线接口设备通讯的能力，可以灵活方便地应用于机载设备检测，装机交联实验当中。     

液氮纯度分析的偏差及修正

液氮纯度是液氮产品非常关键的一个技术指标.液氮纯度的在线跟踪测量是通过测量液氮中的氧含量来实现的.在多年来的液氮在线分析及液氮出库分析过程中,发现氧含量测量结果普遍偏低.本文通过理论分析及大量的实验数据,找到了数据产生偏差的原因,并给出了科学的修正办法,为以后液氮生产过程中更加有效地控制产品质量打下了基础.     

攻击活动目标的一种最优弹道估计

 为分析活动目标的随机飞行状态和减小导弹的脱靶量,提出了数学模拟打靶的一种新方法。其中包括卡尔曼滤波理论结合最大似然法的应用,以及建立相对运动的离散化模型和灵敏度矩阵。为改善飞行状态的估计精度,论述了确立飞行弹道修正协方差矩阵的概念。除此之外,还讨论了导引敏感器静态误差影响脱靶量的估计问题。     

非参量量化秩检测器的性能研究

 许多作者讨论过非参量秩检测器在雷达信号处理中的应用。秩检测器首先把接收波形样本转换为秩。如果检验单元和参考单元的噪声样本独立和分布,则无信号时检验单元的秩具有离散均匀分布,与输入噪声的分布无关。所以秩检测器可能提供分布自由的恒虚警率性能。量化秩检测器（QRD）只对二进量化秩进行积累,所以它实现起来很经济。本文分析QRD的检测性能。证明QRD有一最佳秩量化门限（ORQT）。确定高斯和韦伯噪声中的ORQT。另外,把QRD同高斯噪声中的局部最佳秩检测器和最佳参量检测器进行比较。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

基于VXI总线的检测软件设计

基于VXI总线和虚拟仪器技术，研制开发了用于外场的模拟式电子控制器检测软件，并对软件开发的过程和要求进行了分析，重点解决了程序设计中的需求分析和模块化设计问题。     

具有自学习功能的机载火控系统故障诊断系统研究

研究了一种应用于机载火控系统的具有自学习功能的故障诊断系统.首先介绍了系统的总体结构;然后通过分析火控系统的结构建立了层次诊断模型,并通过示例对诊断系统中知识的表达方法、推理方法等问题做了详细的分析;最后详细描述了系统的自学习机制.应用具有自学习功能的故障诊断专家系统,可实现综合化机载火控系统的智能故障诊断.