A lower bound estimate of the critical load for helicopter main rotor composite blade according to the limit equilibrium theory. The basic steps of an algorithm

The basic steps of an algorithm are given for calculating the parameters of the limiting state of a helicopter main rotor blade. To estimate the static strength, a technique of elastic constants variation is used; it is based on the limit equilibrium theory and enables us to obtain the upper and lower bounds for the critical load simultaneously. An iterative technique is proposed to determine the lower bound of the allowable load on the root section of the composite blade depending on the azimuthal angle of its turn in the helicopter hovering mode.     

Analysis of flow past oscillating cascades by the implicit method to evaluate the cascade aeroelastic stability in viscous flow

A technique of analyzing the flutter initiation in flat plate compressor cascades was developed. The viscous and inviscid flow study was carried out using the COBRA solver based on the modified implicit Godunov method and unsteady implicit method updated for using. The flutter conditions were revealed and the effect of taking into account viscosity, angles of attack and time steps was investigated.     

Determination of the influence of a clearance between the case and blade ends of the semi-open impeller on the centrifugal compressor stage characteristics

The influence of the clearance between the case and blade ends of the semi-open impeller on the centrifugal stage characteristics is considered using the experimental data and numerical calculation results.     

Influence of geometry and operating conditions of a centrifugal compressor stage on the radial gas force

The influence of geometry and operating conditions of the centrifugal compressor stage on the radial gas force is determined on the basis of the theoretical method and calculation program using experimental boundary conditions.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

Calculation of setup variables for the process of bending and rolling thin-walled components using the finite difference method

A mathematical model of the process of bending and rolling the thin-walled components is presented taking into account the geometrical nonlinearity. Also presented is the technique for calculating the setup variables of bending equipment, which is based on reduction of the initial differential boundary-value problem to the discrete one with the use of the finite difference method.     

Experimental analysis of the breakage of a liquid bridge under microgravity conditions

The experimental results obtained in experiment “STACO” made on board the Spacelab D-2 are re-visited, with image-analysis tools not then available. The configuration consisted of a liquid bridge between two solid supporting discs. An expected breakage occurred during the experiment. The recorded images are analysed and the measured behaviour compared with the results of a three dimensional model of the liquid dynamics, obtaining a much better fit than with linear models.     

Displacement simulation for spacecraft structure

The paper presents a technique of forming and evaluating the allowable clearance between a launch vehicle fairing and spacecraft.     

Interplanetary scintillations of the radio source ensemble at the maximum of cycle 24 of solar activity

The results of the interplanetary scintillation observations performed in the period of the maximum of solar activity from April 2013 to April 2014 on the BSA LPI radio telescope at the frequency 111MHz are presented. Fluctuations of the radio emission flux were recorded round the clock for all sources with a scintillating flux of more than 0.2 Jy falling in a strip of sky with a width of 50° over declinations corresponding to a 96-beam directional pattern of the radio telescope. The total number of sources observed during the day reaches 5000. The processing of the observational data was carried out on the assumption that a set of scintillating sources represents a homogeneous statistical ensemble. Daily two-dimensional maps of the distribution of the level of scintillations, whose analysis shows the strong nonstationarity and large-scale irregularity of the spatial distribution of solar wind parameters, were constructed. According to maps of the distribution of the level of scintillations averaged over monthly intervals, the global structure of the distribution of the solar wind was investigated in the period of the maximum of solar activity, which was found to be on the average close to spherically symmetric. The data show that on a spherically symmetric background an east–west asymmetry is observed, which indicates the presence of a large-scale structure of a spiral type in the solar wind.