自燃推进剂火箭发动机燃烧不稳定性研究

发展了自燃推进剂（ＭＭＨ／ＮＴＯ）火箭发动机燃烧不稳定性的综合分析模型。以蒸发作为燃烧速率控制过程,研究了燃烧不稳定性的机理,提出了轴向声腔模型并对其抑制不稳定燃烧的特性进行了数值模拟研究,得到了声槽特性频率驿燃烧不稳定性的影响规律,描绘出声腔影响燃烧不稳定性的具体场景,数值模拟结果与理论分析及试车结果是相符的,对轴向声槽的分析设计将具有广泛的指导意义。     

模块化弹载测控设备内总线交互技术研究与应用

长期以来,模块化设计一直是弹载测控设备主流的实现方法。然而,模块间的信息交互方式没有统一的标准,研制单位根据自身的技术特点、信号特征进行定义,其定义的方式直接影响或决定了弹载测控设备实现的难易程度。为研发一种高效的弹载测控设备内部互联技术,使得在弹载测控设备性能要求越来越复杂的当下,让模块的连接更简单更高效,通用化程度更高,本文从功能上及硬件上对弹载测控设备进行精细化架构划分,分成三大核心模块及功能扩展模块,并定义一种高效的模块级内总线接口形式及协议。总线包含一次供电、二次供电及内部交联信号的输入输出,信号的交互采用半双工总线形式,各模块均可在线访问总线,在线编辑总线。经设计与实验验证,采用该总线的设计方法使得弹载测控设备对外接口交互简单,在线生成遥测PCM (Pulse Code Modulation,脉冲编码调制)码流便捷高效,功能扩展模块可自由地叠加或减少,不增加总线接口的硬件负担,使得弹载测控设备通用化程度很高。     

月球导航星座轨道的地球GNSS可见性评估

随着月球探索进入一个新的时代,为确保未来月球任务的实时高精度定位,大幅提高登月航天器的自主性,且减少对地球基站的依赖,选取合适的轨道构建月球导航星座,并且实现月球导航星座与地球GNSS的通信链路同步尤为重要。为评估月球导航星座轨道中卫星接收GNSS信号的性能,首先对椭圆形月球冻结轨道(ELFO)、近直线晕轨道(NRHO)、顺行圆形轨道(PCO)和低月球轨道(LLO)4种轨道进行仿真。然后基于天线方向图等指标仿真了GNSS卫星信号,并依据主旁瓣波束宽度和载噪比等仿真结果评估了4种不同轨道卫星对GNSS的可见性。结果表明,NRHO和ELFO对GNSS星座有较好的可视效果,最高可见时间占比达99.57%,保障了绝大部分时间内能够稳定接收GNSS信号,有助于实现月球导航星座轨道卫星的轨道和时钟校正,并保证轨道的定位性能。     

某高速着陆无人机方向舵纠偏控制设计及性能分析

无人机高速着陆过程中,由于侧风或初始干扰导致的滑跑侧偏极其危险。基于高速状态下方向舵纠偏效率高的特点,建立某无人机高速着陆动力学模型,设计方向舵纠偏控制策略,并基于Matlab/Simulink平台建立无人机滑跑非线性动力学模型及方向舵纠偏控制模型;对具有初始1°偏航角和1m/s持续垂直侧风情况下的无人机着陆工况进行仿真分析,并通过控制着陆速度、着陆初始姿态角和侧风强度,分析纠偏控制系统的性能。结果表明:所设计的纠偏控制系统具有一定的航向纠偏和抗持续侧风能力,最大侧偏距小于3 m,偏航角小于5°,较好地实现了高速滑跑阶段的侧向纠偏性能。     

飞机地面转弯和刹车响应动力学分析

 建立了飞机地面运动的数学模型,模型中考虑机体的六自由度运动和起落架弹性;基于滑移率控制方式建立了机轮防滑刹车模型。通过仿真得出了飞机地面匀速转弯和滑跑刹车的动态响应。其结果表明,飞机匀速转弯时,其峰值出现在初始非稳态时刻;弹性起落架在着陆和刹车过程中产生走步现象;采用滑移率控制方式使飞机在整个刹车过程中取得最佳刹车性能。     

Glacier mapping based on rough set theory in the Manas River watershed

Precise glacier information is important for assessing climate change in remote mountain areas. To obtain more accurate glacier mapping, rough set theory, which can deal with vague and uncertainty information, was introduced to obtain optimal knowledge rules for glacier mapping. Optical images, thermal infrared band data, texture information and morphometric parameters were combined to build a decision table used in our proposed rough set theory method. After discretizing the real value attributes, decision rules were calculated through the decision rule generation algorithm for glacier mapping. A decision classifier based on the generated rules classified the multispectral image into glacier and non-glacier areas. The result of maximum likelihood classification (MLC) was used to compare with the result of the classification based on the rough set theory. Confusion matrix and visual interpretation were used to evaluate the overall accuracy of the results of the two methods. The accuracies of the rough set method and maximum likelihood classification were compared, yielding overall accuracies of 94.15% and 93.88%, respectively. It showed the area difference based on rough set was smaller by comparing the glacier areas of the rough set method and MLC with visual interpreter, respectively. The high accuracy for glacier mapping and the small area difference for glacier based on rough set theory demonstrated that this method was effective and promising for glacier mapping.     

Analysis Approach to Durability Based on Material Initial Fatigue Quality and S-N Curve

Based on probabilistic fracture mechanics approach, a new concept of material initial fatigue quality (MIFQ) is developed. Then, the relation between S-N curve and crack propagation curve is studied. From the study, a new durability analysis method is presented. In this method, S-N curve is used to determine crack growth rate under constant amplitude loading and evaluate the effects of different factors on durability and then the structural durability is analyzed. The tests and analyses indicate that this method has lower dependence on testing, and higher accuracy, reliability and generality and is convenient for application.     

基于AutoCAD的OAS面保护区的自动生成及障碍物评估

OAS面是在基本ILS面之上的独立的一个障碍物评价面,比使用基本ILS面评估障碍物要精确,并且评估后得到的最低超障高(OCHps)是制定精密进近最低着陆标准的最主要依据。此次基于Visual-Lisp编制的这套系统,在输入基本参数后,可以自动完成保护区的绘制,并通过点击障碍物位置,完成障碍物评估,生成所需的表格。此系统在果洛、祁连等机场的飞行程序设计中得到了很大的应用,实用性很高,减少了工作量。     

考虑不同载荷顺序下应力损伤模糊性的Miner法则

针对传统Miner法则无法考虑载荷加载顺序的缺陷，应用模糊理论分析了不同载荷顺序下疲劳极限附近的应力对构件造成疲劳损伤的模糊性，使修正后的模糊Miner理论能够较好地反映出载荷加载顺序对疲劳寿命的影响。算例分析结果表明，该方法可使疲劳寿命的预测误差由原来的61．6％减小到21．7％。     

Initial virtual flight test for a dynamically similar aircraft model with control augmentation system

To satisfy the validation requirements of flight control law for advanced aircraft,a wind tunnel based virtual flight testing has been implemented in a low speed wind tunnel.A 3-degree-offreedom gimbal,ventrally installed in the model,was used in conjunction with an actively controlled dynamically similar model of aircraft,which was equipped with the inertial measurement unit,attitude and heading reference system,embedded computer and servo-actuators.The model,which could be rotated around its center of gravity freely by the aerodynamic moments,together with the flow field,operator and real time control system made up the closed-loop testing circuit.The model is statically unstable in longitudinal direction,and it can fly stably in wind tunnel with the function of control augmentation of the flight control laws.The experimental results indicate that the model responds well to the operator's instructions.The response of the model in the tests shows reasonable agreement with the simulation results.The difference of response of angle of attack is less than 0.5°.The effect of stability augmentation and attitude control law was validated in the test,meanwhile the feasibility of virtual flight test technique treated as preliminary evaluation tool for advanced flight vehicle configuration research was also verified.