动态直视系统的设计与应用

本文以火箭模型为例,着重介绍飞行器飞行的过程以图象的方式在SGID4/25G工作站上实时地显示出来。     

风洞虚拟飞行模型机与原型机动力学特性分析

在低速风洞虚拟飞行试验系统中,采用三自由度（3-DOF）球铰支撑动力学相似缩比飞机模型,在气动力矩作用下试验模型可绕质心自由转动。这种带约束的运动与具有六自由度（6-DOF）的真实大气飞行存在差别,鉴于此,对各影响因素逐个剖离并进行了数值模拟和对比分析。结果表明：位移约束使两者间的动力学特性产生较明显的差异,缩比的影响符合相似准则规律,机构摩擦、模型重心与支撑点不重合影响较小,常值干扰力矩对模型的初始响应有一定影响。对比分析结果可以用于指导风洞虚拟飞行试验的开展,并有助于完善风洞虚拟飞行试验技术及其拓展应用。     

基于深度神经网络的客机总体设计参数敏感性分析

飞机总体主要设计参数敏感性分析揭示了总体主要设计参数对飞机特性指标的影响,有助于总体设计方案的决策。针对宽体客机总体主要设计参数敏感性问题,根据其总体主要设计参数和特性指标的特点,以及多学科间的耦合关系,建立了深度神经网络模型。该深度神经网络模型以客机总体主要设计参数为输入,对特性指标进行预测。在深度神经网络模型中,设置了多个输入层、多个输出层以及多个分块的隐藏层,从而模拟客机总体主要设计参数对特性指标的影响以及不同特性指标之间的相互作用。测试结果表明,与传统代理模型相比,深度神经网络模型对客机特性指标的预测精度更高,多参数适应性更好。利用该深度神经网络模型对客机总体主要设计参数进行敏感性分析。分析结果表明,机翼1/4弦线后掠角在30°~31.5°时,有利于减少最大起飞重量和起飞平衡场长;发动机海平面最大静推力和机翼面积对客机直接使用成本、最大起飞重量等特性指标的影响最为显著。     

卫星导航系统天线阵接收机波束指向误差分析

研究表明：卫星导航系统阵元几何位置误差是影响波束指向误差的主要因素,而卫星和接收机位置误差则影响甚微,其中千米级的卫星位置误差以及接收机位置误差导致的波束指向误差不超过0.1°,而毫米级的阵元几何位置随机误差可导致典型7阵元天线阵波束指向误差达到几度。该研究成果可为卫星导航系统天线阵接收机的设计提供依据。     

IEEE1394总线接口设计

IEEE1394总线是一种应用广泛的高速实时传输总线。文章给出了一种基于TSB12LV32和TSB41AB3的IEEE1394总线接口设计方案,并对接口连接进行了详细阐述。使用DSP搭配FPGA构建事务层,与链路层、物理层一起构成完整的IEEE1394通信链路。该方案可以实现链路层和物理层的无缝链接,并且异步事务和等时...     

充液挠性航天器的建模与动力学分析

借助于Kane方法建立了充液中心刚体上带有挠性附件的航天器的开链多体动力学模型.采用了混合坐标法和弹簧-质量块液体晃动等效力学模型,所得方程形式简洁.由于引入了2级附件,该模型具有更强的通用性.以跟踪与数据中继卫星为例,给出了数值仿真结果.      

Ultrastructural study of iron oxide precipitates: implications for the search for biosignatures in the Meridiani hematite concretions, Mars

Two terrestrial environments that have been proposed as analogs for the iron oxide precipitation in the Meridiani Planum region of Mars include the Rio Tinto precipitates and southern Utah marble concretions. Samples of two typical Utah iron oxide concretions and iron oxide precipitates in contact with biofilms from Rio Tinto have been studied to determine whether evidence could be found for biomediation in the precipitation process and to identify likely locations for fossil microorganisms. Scanning electron microscopy, energy dispersive X-ray, and gas chromatography-mass spectrometry (GC-MS) were used to search for biosignatures in the Utah marbles. The precipitation of iron oxides resembles known biosignatures, though organic compounds could not be confirmed with GC-MS analysis. In contrast, textural variations induced by biological activity are abundant in the modern Rio Tinto samples. Although no compelling evidence of direct or indirect biomediation was found in the Utah marbles, the ultrastructure of the iron oxide cement in the concretion suggests an inward growth during concretion precipitation from an initially spherical redox front. No indication for growth from a physical nucleus was found.     

Overloading of Landing Based on the Deformation of the Lunar Lander

Along with the progress of sciences and technologies, a lot of explorations are taken in many countries or organizations in succession. Lunar, the natural satellite of the earth, become a focus of the space discovery again recently because of its abundant resource and high value in use. Lunar exploration is also one of the most important projects in China. A primary objective of the probe in lunar is to soft-land a manned spacecraft on the lunar surface. The soft-landing system is the key composition of the lunar lander. In the overall design of lunar lander, the analysis of touchdown dynamics during landing stage is an important work. The rigid-flexible coupling dynamics of a system with flexible cantilevers attached to the main lander is analyzed. The equations are derived from the subsystem method. Results show that the deformations of cantilevers have considerable effect on the overloading of the lunar lander system.     

Guidepost-based autonomous orbit determination method for GEO satellite

Guidepost-based navigation system is a novel autonomous orbit determination method for the GEO satellite. The system is achieved by using the camera imaging function to obtain the guidepost images and the GNSS signal receiver to obtain the pseudoranges between the GEO and the navigation satellites. Due to the high altitude of GEO satellite and the time-varying sunlight condition in the space environment, it may be difficult to obtain object image points and the distance measurements of GNSS because of the weak visibility of the guideposts. To deal with the problem, a novel integrated orbit determination system is presented. The Earth landmarks, the in-orbit spacecraft and GNSS navigation satellites whose line-of-sights and the distance can be easily obtained are used at the same time as information for the GEO satellite navigation based on the observability conditions analysis. The observability of the GEO satellite navigation system is analyzed through the physical observability, the mathematical observability and the engineering observability through the observing geometry, the rank of observability matrix and the Cramer-Rao lower bound (CRLB) respectively. Besides, the maximum correntropy unscented Kalman filter (MCUKF) algorithm is applied to improve the estimation stability of the system in the presence of non-Gaussian noises. The simulation indicates the feasibility of the proposed scheme.     

PC机与数控机床CNC系统通讯

介绍通用微型机与数控机床ＣＮＣ系统之间通讯的具体实现方法，完成数控加工程序的直接输入／输出。实践表明该方法具有理想的应用效果。