固体火箭发动机点火过程内流场的二维预示

本文对固体火箭发动机点火过程的内场流进行了二维无粘非定常分析，计算得到了该阶段燃烧室中压强，温度和速度的分布。本文还提出了以近似预示复杂三维装药发动机内流场的有效积法。     

空间交会动力学和安全模式

本文首先导出空间交会相对运动方程并给出其物理解释,然后给出动力学方程的解析解,并分析其动力学性质,最后导出不碰撞安全区和位置保持点的表达式。选择适当初始条件可以求出安全区和保持点。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

《实用英语》教法研究新思路

本文主要阐明了教师在教授《实用英语》的过程中，应更多地寻找新思路，探求新方法，创造性地使用教材，以交际法为主线，博采众长，为我所用。根椐各流派教法，结合《实用英语》，作者着重讲述了如何灵活安排教学计划，提出课堂教学中切实可行的方法。     

强化实践教学与管理 提高实践质量与效果

本文以《模拟电路》及相关实验为例，分析了实践性教学的现状，找出了实践性教学中存在的问题。最后针对所存在的问题，提出了几点改进措施，以期达到提高实践质量与效果的目的。     

轴对称横向喷流强干扰流场的巨型机向量并行计算

本文在国产巨型计算机ＹＨ－１和ＹＨ－２上对ＭａｃＣｏｒｍａｃｋ显格式解轴对称横向喷流强干扰流场的计算程序进行了重构和向量优化使其能并行执行。得到该程序在ＹＨ－１上的向量加速比约为６．０，ＹＨ－２单机向量运行速度约为ＹＨ－１上的向量运行速度的３倍。与传统的串行计算相比较，并行计算大大缩短了程序运行的ＣＰＵ时间。     

ZN3火箭姿态测量用太阳角计

本文给出了用于ＺＮ３火箭姿态测量太阳角计的原理和测量结果，讨论了背景抑制和标定方法，分析了误差来源。该仪器采用选取适当探测波段和比值测量方法较好地消除了地外太阳辐照和大气消光的影响，也有效地抑制了背景辐射的干扰，大大提高了测量精度。实测结果表明，火箭姿态角测量的均方根误差约为０．７°。这一方法适用于各种自旋稳定飞行器的姿态测量。     

固体发动机喷管烧蚀和温度场测量

介绍了含铝复合推进剂发动机试验时,对其喷管进行的烧蚀和温度场测量,获得了复合喷管结构中的烧蚀和瞬时温度分布.     

International cooperation in space — new opportunities, new approaches : An assessment

Now that the Cold War is over, the authors of this Viewpoint believe that in the interests of the USA as well as the rest of the world international cooperation should become a more fundamental element of US space policy. Cooperative agreements will not always be easy to reach and will require creative statecraft. To that end the USA should take the initiative in establishing a high-level international policy forum to facilitate discussions on the main goals and objectives to be served by international cooperation in space.