超高速模型及其等离子体鞘套RCS特性研究(英文)

为了研究等离子体对超高速模型雷达散射截面的影响,利用气动物理靶测量超高速模型及其绕流的雷达散射截面(RCS),给出了雷达接收信号、信号频谱和模型雷达散射截面的一维距离像。利用时域有限差分方法(FDTD)分析了等离子体鞘套对模型电磁散射特性的影响。将数值模拟结果和试验结果进行了对比,对比结果显示二者符合得很好。数值模拟结果还表明雷达入射角小角度偏移对测量结果有较大影响。     

基于PVDF敏感器的空间碎片撞击航天器感知定位技术

从理论和实验两个方面开展了基于PVDF(Polyvinylidene Fluoride)压电薄膜敏感器的空间碎片撞击航天器感知定位技术研究,分析了基于双曲线理论的定位方法,并在理论分析的基础上,利用气枪和超高速弹道靶分别开展了平面铝板、曲面铝板等单层结构和Whipple结构下的验证实验。弹丸速度范围100m/s-3km/s,实验靶材为2mm厚的单层铝板和铝板厚为1mm、前后间距为10cm的Whipple结构,靶材上安装了4个PVDF传感器。研究结果表明：基于PVDF传感器的感知定位技术可实现空间碎片撞击航天器的位置定位,是一种可应用于航天器在轨感知空间碎片撞击系统的可选技术。     

超细高氯酸铵团聚状态表征的毛细渗透速度技术研究

超细AP的团聚状态是影响推进剂燃速性能的一个重要因素。根据Washburn方程,首先建立粒径与毛细渗透速度k的定标曲线;再通过对不同团聚状态的超细AP毛细渗透速度k值的测量,应用定标曲线定量表示出团聚状态的等效粒径d43,并证明k和d43均可作为定量表征团聚状态的参数,为系统描述氧化剂状态及对燃速影响提供了新方法;通过建立浸润模型,提出了应用等效粒径评价团聚状态的临界判据。大量的生产现场实验研究结果表明,毛细渗透速度法是表征超细AP样品状态的一种实用新技术。     

The Gyrolite: A New Generation Synchronous Satellite

A typical GYROLITE spacecraft recently designed by this author is described. It is shown that, for the satellite to have a stable attitude, the spinning part must have a favorable inertia ratio.     

高光谱成像技术的应用与发展

介绍了国外先进高光谱成像载荷发展情况和国内以高分五号载荷为代表的高光谱成像技术发展水平,凭借在光谱分辨率、空间分辨率、成像质量等方面取得的长足进步,广泛应用于资源勘探和环境监测等多个重要领域。分析了Offner结构和Dyson结构的推扫型成像仪的特点,提出未来凝视型成像方式的发展前景,并介绍了目前基于AOTF分光方法的中红外高光谱成像仪,实现了较好的光谱成像效果。     

火灾试验中复合推进剂热辐射通量的测量

为了验证热辐射通量理论计算方法对推进剂的适用性,采用热辐射计测试了三种推进剂在外部火烧试验中的热辐射通量最大值和平均值,并根据样品燃烧时间计算了样品的热辐射通量。三种推进剂的热辐射通量的测量平均值为2.87kW/m2,2.65kW/m2和3.44kW/m2,理论计算值为4.06kW/m2,7.62kW/m2和3.67kW/m2。结果表明:当样品燃烧时间大于5s时,热辐射通量的测试平均值与理论计算值基本一致;当燃烧时间小于5s时,由于理论计算公式中设定的燃烧热转变为辐射热的比例(0.33)大于实际转化率,导致热辐射通量的理论计算值偏大,因此建议用热辐射计测量样品的热辐射通量。     

On Stabilizing Role of Parallel Inhomogeneous Flow on Low-frequency Space Fluctuations

A fundamental reality throughout the space plasma is the existence of magnetic field-aligned flows. It is usually believed that the spatial transverse shear in the parallel flow destabilizes many low frequency oscillations and this may be the origin of low frequency oscillations in the ionosphere (V. V. Gavrishchaka et al., 1998, Phys. Rev. Lett., 80, 728 and Phys. Rev. Lett.: 2000, 85, 4285). Here we show that this notion of destabilizing influence of the shear in the parallel flow can be changed altogether if one takes the effect of the flow curvature (second spatial derivative) into account. The transverse curvature in the parallel flow can overcome the destabilizing influence of the shear and can render the low frequency modes stable. It is shown that unlike flow shear the effect of flow curvature is sign- and mode-dependent. This revised version was published online in August 2006 with corrections to the Cover Date.     

Power factor correction circuits with robust current control technique

A dynamically robust current control method to synthesize a sinusoidal input current for AC-to-DC converters with boost type topology is presented. Under this control strategy, the inductor current and the diode current of the boost converter are fed back and combined in a special way which makes the input current of the AC-to-DC converter stable and robust. The input current is solely determined by the reference current. When the reference current signal is derived from the sinusoidal input voltage, the input current is sinusoidal and in phase with the input voltage. Theoretical analysis is first provided. Small signal analysis shows that the current loop is inherently stable and has a fast dynamic response. Large signal analysis reveals that the control system is not affected by large disturbances in supply voltage or output load. Computer simulations have been carried out and experimental prototype models have been built to verify the analysis and demonstrate the feasibility of the control strategy. A power factor of 0.998 and a total harmonic distortion (THD) of 3.18% are measured.