湿热环境下复合材料层合板本构模型研究及其应用

近年来复合材料被广泛地应用于航空航天等工程领域。在实际的使用中,复合材料在不同的湿热环境下其力学性能会发生显著变化,针对这一问题,国内外已有大量的试验研究,而对湿热环境下复合材料的本构模型理论的研究则较少。在经典层合板理论基础上引入湿热膨胀系数的概念,通过定义一个无量纲的温度,建立材料弹性常数与湿热参数之间的函数关系,推导出复合材料单层板在湿热力耦合作用下的本构关系,同时加入三维Hashin失效判定准则对层合板的损伤演化及失效模式进行模拟。结果表明:该模型较好地预测了复合材料层合板在不同湿热环境下的弹性响应,为分析实际工程中复合材料结构模型在湿热环境下的力学行为提供了重要参考。     

大展弦比飞机运动稳定性建模及分析

随着飞机设计技术的提高和新型材料的应用,现代飞机气动弹性效应越来越显著,刚体运动和弹性体振动互相解耦的关系不再明显,在分析弹性飞机相关问题时,应该综合地、统一地考虑飞行动力学与气动弹性力学问题。本文在一般体轴系下综合考虑了飞机刚体运动自由度和弹性振动自由度,建立弹性飞机刚弹耦合运动的方程,通过在配平状态下引入小扰动运动假设,以及利用有理函数拟合技术将偶极子格网法计算所得到的频域非定常气动力转化为时域形式,建立了大柔性飞机刚弹耦合小扰动状态空间方程,并对纵向运动稳定性进行分析计算。针对文中构型飞机,运用本文所采用的方法计算所得结果与传统的线性及刚体计算所得结果进行对比分析,非线性计算方法所得颤振速度更小,而且失稳模态亦发生变化,对于飞行力学模态而言,长周期模态稳定性变差,在计算速度范围内出现失稳的现象,由此说明机翼大变形对飞机稳定性所带来的影响。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

An evolutionary computational framework for capacity-safety trade-off in an air transportation network

Airspace safety and airport capacity are two key challenges to sustain the growth in Air Transportation. In this paper, we model the Air Transportation Network as two sub-networks of airspace and airports, such that the safety and capacity of the overall Air Transportation network emerge from the interaction between the two. We propose a safety-capacity trade-off approach,using a computational framework, where the two networks can inter-act and the trade-off between capacity and safety in an Air Transport Network can be established. The framework comprise of an evolutionary computation based air traffic scenario generation using a flow capacity estimation module(for capacity), Collision risk estimation module(for safety) and an air traffic simulation module(for evaluation). The proposed methodology to evolve air traffic scenarios such that it minimizes collision risk for given capacity estimation was tested on two different air transport network topologies(random and small-world) with the same number of airports. Experimental results indicate that though airspace collision risk increases almost linearly with the increasing flow(flow intensity) in the corresponding airport network, the critical flow depend on the underlying network configuration. It was also found that, in general, the capacity upper bound depends not only on the connectivity among airports and their individual performances but also the configuration of waypoints and mid-air interactions among conflicts. Results also show that airport network can accommodate more traffic in terms of capacity but the corresponding airspace network cannot accommodate the resulting traffic flow due to the bounds on collision risk.     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题,基于动态分层动网格技术,构建了含导弹运动和二次燃烧的内弹道数值模型,并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度,导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥,较大程度地缓解了冲击现象,获得了较好的平滑效果,筒底压力较实验装置降低了24.5%。     

考虑小载荷强化的模糊疲劳寿命预测理论

在实际工程应用中,多选用Miner法则进行疲劳寿命预测。由于小载荷特别是在疲劳极限附近的载荷对结构或材料的损伤不容忽略,考虑到小载荷的每一次循环对材料产生损伤的同时还产生了强化作用,建立了基于小载荷强化损伤的寿命预测模型以及相应的模糊疲劳寿命计算公式。该模型不但考虑了低于疲劳极限的载荷的强化作用,还引入隶属函数来描述小载荷的累积损伤的模糊性,完善了Miner法则的适用范围,提高了预测精度。两个不同载荷谱的疲劳寿命预测实例验证了该模型的有效性。     

腹下无隔道大偏距跨声速S弯进气道气动特性的实验研究(英文)

An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate： （1） a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; （2） the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; （3） the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; （4） the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534.