德国机床工业的创新和趋势

机床是一个复杂的机电一体化系统.机床的创新离不开新结构、新材料、新的功能部件、新刀具和新的外围设备.加工工艺的发展以及加工过程的仿真和监控也日益受到重视.     

冰雹的数值模拟方法初探

冰雹的撞击对于飞机的整个结构存在着巨大的威胁,偶尔的一次遭遇冰雹袭击也是对飞机结构性能的严峻考验。由于实验测试需要投入大量的人力财力,因此,建立冰雹的数学模型显得尤为重要。目前所建立的数值模型主要有三种：有限元（FE）模型,任意拉格朗日一欧拉（ALE）模型和光滑粒子流体动力学（SPH）模型。首先论证了这些数值模型与实验测试结果吻合的情况,接着模拟了冰雹撞击飞机发动机进气道的过程,最后通过对这三种冰雹模型的比较,得出了SPH模型是分析冰雹撞击飞机问题的最有效、最好的模型的结论。     

高负荷压气机叶栅分离结构及其等离子体流动控制

 为揭示高负荷压气机叶栅内部流动损失的产生机理和分布规律以及等离子体气动激励的作用机制,利用拓扑分析和数值计算方法,从计算模型的建立与验证、基准流场的分离结构和等离子体流动控制3个方面展开研究;对总压损失系数分布、拓扑结构和表面流谱与空间流线分布以及旋涡结构进行分析,并开展了激励方式的优化分析.结果表明:随着攻角的增大,固壁面拓扑结构增加了3对奇点,吸力面流向激励改变了固壁面拓扑结构.当攻角为2°时,在吸力面拓扑结构中产生了一对奇点,打断了角区分离线,并引入了一条回流再附线.叶栅流道内部有5个主要涡系,尾缘径向对涡促进流体的展向流动,并成为吸力面倒流的主要组成部分;角涡是一个独立的涡系,其强度和尺度不受等离子体气动激励的影响.吸力面流向激励可以改善叶中流场,但对角区流动作用很小;端壁横向激励可以降低角区流动损失,对叶中流场作用有限;吸力面流向与端壁横向组合激励在整个叶高范围内均可以显著抑制流动分离;端壁横向流动对角区流动分离结构的影响大于吸力面附面层的分离.吸力面流向激励的优化明显降低,而端壁横向激励和组合激励的优化保持并增强了等离子体流动的控制效果.     

混合排气二元收敛喷管气动与红外隐身综合设计方法

为使混合排气二元收敛喷管的设计在满足发动机推力性能要求的同时,也具有良好的红外特征信号抑制效果,从固定式混合排气二元收敛喷管的设计要求出发,提出了一套混合排气二元收敛喷管气动与红外隐身综合设计的方法和流程.并通过算例计算验证了该设计方法的可行性.另外,计算结果表明:二元喷管的进口截面位置、喷管总长、出口面积以及出口宽高比等几何参数对实现喷管推力性能均起到关键作用;而合理确定出口宽高比,对实现喷管红外隐身性能具有重要作用.      

圆锥脉冲等离子体诱导流场特性分析

对等离子体诱导流场特性进行研究,有利于解决双稳态非对称分离涡带来的连续比例控制困难的问题。在封闭光学玻璃箱体内,应用介质阻挡放电等离子体对20°顶角圆锥附近静止大气进行了定常和脉冲循环控制,对等离子体诱导的圆锥截面绕流速度场进行了二维PIV测量,对定常控制和脉冲循环控制下最大绕流速度及最大轴向涡量进行了比较分析。实验结果表明：相对于定常控制模式,脉冲循环控制下沿垂直于圆锥截面对称面径线分布的时间平均切向速度和轴向涡量范围较广;在脉冲循环控制下,动量传递的主要表现在离散涡的形成而不是气流的加速。     

光纤陀螺的温度实验与仿真分析

热致非互易相移的存在影响了光纤陀螺的工作精度.通过对热致非互易相移的分析,把握了该相移与光纤陀螺温度特性的关系.在此基础上,进行了光纤陀螺的温度实验与仿真分析.结果表明,仿真分析光纤陀螺的整体温度分布是可行的;温度实验与仿真分析相结合的办法有助于光纤陀螺温度特性的把握.     

异种金属材料磁脉冲焊接技术

通过对磁脉冲焊接技术结合机理的阐述,采用5A03Al-5A06Al、1050Al-AZ31Mg异种金属材料进行焊接试验.对所得的焊接接头进行气密性试验和剥离试验,检测其结合质量;结合光学显微镜,对比分析Al-Al、Al-Mg焊接接头的微观形貌特点;并采用SEM/EDS分析界面附近的元素分布;最后通过硬度试验,检测接头界...     

多孔质节流空气静压轴承静态性能实验研究

本文采用不锈钢多孔质材料研制了一种新的空气静压轴承,并对不同平均孔径的多孔质空气静压轴承以及一种表面复合节流空气静压轴承的承载能力和刚度进行了实验测试和分析,结果表明,选用合适的不锈钢多孔质材料以及适当的加工方法可以制造高承载能力与高刚度的空气静压轴承。     

The Magnetic Field of Mercury

The magnetic field strength of Mercury at the planet’s surface is approximately 1% that of Earth’s surface field. This comparatively low field strength presents a number of challenges, both theoretically to understand how it is generated and observationally to distinguish the internal field from that due to the solar wind interaction. Conversely, the small field also means that Mercury offers an important opportunity to advance our understanding both of planetary magnetic field generation and magnetosphere-solar wind interactions. The observations from the Mariner 10 magnetometer in 1974 and 1975, and the MESSENGER Magnetometer and plasma instruments during the probe’s first two flybys of Mercury on 14 January and 6 October 2008, provide the basis for our current knowledge of the internal field. The external field arising from the interaction of the magnetosphere with the solar wind is more prominent near Mercury than for any other magnetized planet in the Solar System, and particular attention is therefore paid to indications in the observations of deficiencies in our understanding of the external field. The second MESSENGER flyby occurred over the opposite hemisphere from the other flybys, and these newest data constrain the tilt of the planetary moment from the planet’s spin axis to be less than 5°. Considered as a dipole field, the moment is in the range 240 to 270 nT-R _M ³ , where R _M is Mercury’s radius. Multipole solutions for the planetary field yield a smaller dipole term, 180 to 220 nT-R _M ³ , and higher-order terms that together yield an equatorial surface field from 250 to 290 nT. From the spatial distribution of the fit residuals, the equatorial data are seen to reflect a weaker northward field and a strongly radial field, neither of which can be explained by a centered-dipole matched to the field measured near the pole by Mariner 10. This disparity is a major factor controlling the higher-order terms in the multipole solutions. The residuals are not largest close to the planet, and when considered in magnetospheric coordinates the residuals indicate the presence of a cross-tail current extending to within 0.5R _M altitude on the nightside. A near-tail current with a density of 0.1 μA/m² could account for the low field intensities recorded near the equator. In addition, the MESSENGER flybys include the first plasma observations from Mercury and demonstrate that solar wind plasma is present at low altitudes, below 500 km. Although we can be confident in the dipole-only moment estimates, the data in hand remain subject to ambiguities for distinguishing internal from external contributions. The anticipated observations from orbit at Mercury, first from MESSENGER beginning in March 2011 and later from the dual-spacecraft BepiColombo mission, will be essential to elucidate the higher-order structure in the magnetic field of Mercury that will reveal the telltale signatures of the physics responsible for its generation.     

Lithium Abundance in Pop.II Stars A post-HIPPARCOS discussion

The relation between the lithium abundance observed in Population II stars and the primordial abundance, is still an open question (see Cayrel and Duncan, this meeting). A few recent results are discussed. HIPPARCOS data show that the standard model of stellar evolution can explain the 6Li detection in HD 84937, suggesting a negligible depletion of 7Li. A slope in the Li/Teff relation for Pop II dwarfs and a spread of their Li abundance have been advocated, and both used as arguments in favor of Li depletion. The slope is not confirmed when two other independent temperature scales are used. The Li scatter around the plateau is hardly larger than the scatter predicted from determination errors. Hints from a scatter of Li in subgiants of the globular cluster M92 are not completely conclusive. The determination of more accurate Li abundances in the Pop II stars is an urgent but difficult task, requiring better model atmosphere (better convection treatment) and the help of observational data about Pop II stars (such as long base interferometry).