Beagle 2: a proposed exobiology lander for ESA's 2003 Mars Express mission.

The aim of the proposed Beagle 2 small lander for ESA's 2003 Mars Express mission is to search for organic material on and below the surface of Mars and to study the inorganic chemistry and mineralogy of the landing site. The lander will have a total mass of 60kg including entry, descent, and landing system. Experiments will be deployed on the surface using a robotic arm. It will use a mechanical mole and grinder to obtain samples from below the surface, under rocks, and inside rocks. Sample analysis by a mass spectrometer will include isotopic analysis. An optical microscope, an X-ray spectrometer and a Mossbauer spectrometer will conduct in-situ rock studies.     

Direction-finding with sparse rectangular dual-size spatialinvariance array

A novel sparse array geometry embedding two sizes of spatial invariances is presented for use with a new ESPRIT-based (estimation of signal parameters via rotational invariance techniques) algorithm for aperture extension. The half-wavelength invariance yields unambiguous but high-variance direction cosine estimates to disambiguate low-variance but cyclically ambiguous estimates from the larger invariance. With larger invariance at 60 half-wavelengths, resolution threshold for two closely spaced emitters is reduced by 50 dB and estimation error by 100-fold. Array design formulas are also presented     

Improvement of forebody/inlet integration for hypersonic vehicle

Results of a numerical (CFD) study of the influence of the forebody shape on local flow parameters at a bottom-mounted inlet entrance are presented. The free-stream Mach number is assumed to be 3.5–7.0. Some recommendations on forebody shape optimization are provided. Main characteristics of the air inlet are evaluated.     

Residual chromatin breaks as biodosimetry for cell killing by carbon ions

We have studied the relationship between cell killing and the induction of residual chromatin breaks on various human cell lines and primary cultured cells obtained by biopsy from patients irradiated with either X-rays or heavy-ion beams to identify potential bio-marker of radiosensitivity for radiation-induced cell killing. The carbon-ion beams were accelerated with the Heavy Ion Medical Accelerator in Chiba (HIMAC). Six primary cultures obtained by biopsy from 6 patients with carcinoma of the cervix were irradiated with two different mono-LET beams (LET= 13 keV/μm, 76 keV/μm) and 200kV X rays. Residual chromatin breaks were measured by counting the number of non-rejoining chromatin fragments detected by the premature chromosome condensation (PCC) technique after a 24 hour postirradiation incubation period. The induction rate of residual chromatin breaks per cell per Gy was the highest for 76 keV/μm beams on all of the cells. Our results indicated that cell which was more sensitive to the cell killing was similarly more susceptible to induction of residual chromatin breaks. Furthermore there is a good correlation between these two end points in various cell lines and primary cultured cells. This suggests that the detection of residual chromatin breaks by the PCC technique may be useful as a predictive assay of tumor response to cancer radiotherapy.     

用CBN刀具高速切削灰铸铁的试验研究

研究了CBN刀具高速切削灰铸铁时的刀具前、后刀面磨损、耐用度以及富氧气氛对切削性能的影响,所用的灰铸铁具有不同的铁素体、珠光体比例,最高切削速度达1＇100 m/min.研究表明Amborite刀具的刀尖磨损略大于BZN6000刀具,在较低速度下加工以铁素体为主的灰铸铁时更容易发生月牙洼磨损;BZN6000刀具以700 m/min的切削速度加工铁素体含量较高的灰铸铁时耐用度较高,Amborite刀具的耐用度随切削速度而升高;在富氧气氛中切削可以减轻刀具磨损,这一效果对BZN6000刀具更为显著.文章中对这些现象的原因进行了讨论.     

Study of physiological effects of weightlessness and artificial gravity in the flight of the biosatellite Cosmos-936.

In the 18.5-day flight of the Soviet biosatellite Cosmos-936 (3-22, August 1977) com-parative investigations of the physiological effects of prolonged weightlessness (20 rats) and artificial gravity of 1 g (10 rats) were carried out. Throughout the flight artificial gravity was generated by means of animal rotation in two centrifuges with a radius of 320mm. Postflight examination of animals and treatment of the flight data were performed by Soviet scientists in collaboration with the specialists from Bulgaria, Czechoslovakia, the German Democratic Republic, Hungary, Poland, Rumania, France and the U.S.A. During the flight the total motor activity of the weightless rats was higher and their body temperature was lower than those of the centrifuged animals. Postflight examination of the weightless rats showed a greater percentage of errors during maze an increase in water intake and a decrease in diuresis; a fall of the resistance of peripheral red cells; an increase in the conditionally pathogenic microflora in the mouth; a decrease of oxygen consumption, carbon dioxide production and energy expenditures; a drop in the static physical endurance; a decline in the capacity to keep balance on the rail; an increase in the latent period of the lifting reflex, etc. The centrifugal animals displayed lesser or no change of the above type. These findings together with the biochemical and morphological data give evidence that during and after flight adaptive processes in the centrifuged rats developed better.     

Communications and radio determination system using twogeostationary satellites. I. System and experiments

We developed two types of hybrid terminals that can provide both satellite communication and position determination services in one system. One terminal uses the single channel per carrier (SCPC) technique and the other uses the spread spectrum (SS) technique. To evaluate the performance of the two systems, we carried out experiments in Japan and in the Pacific Ocean using two geostationary satellites, ETS-V (150°E) and Inmarsat (180°E). The ranging accuracy between the mobile terminals and the base station via the satellites was found to be about 200 m using the SCPC system and about 10 m using the SS system. The measured positioning accuracy was about 1 km in the SCPC system and about 600 m in the SS system when experiments were carried out near Japan. The experimental results show that the positioning errors were mainly caused by the orbital determination errors of the two satellites. Presented here are the configurations and features of the SCPC and SS terminals, the experimental system, and the experimental results     

Magnetic Field Fluctuations in the Solar Wind, Foreshock and Magnetosheath： Cluster Data Analysis

46 magnetosheath crossing events from the two years (2001.2-2003.1) of Cluster magnetic field measurements are identified and used to investigate the characters of the magnetic field fluctuations in the regions of undisturbed solar wind, foreshock, magnetosheath. The preliminary results indicate the properties of the plasma turbulence in the magnetosheath are strongly controlled by IMF orientation with respect to the bow shock normal. The amplitude of the magnetic field magnitude and direction variations behind quasi-parallel bow shock are larger than those behind quasi-perpendicular bow shock. Almost purely compressional waves are found in quasi-perpendicular magnetosheath.     

A method of technologic audit of technical re-equipment projects in aircraft production enterprises

A method of technologic audit for technical re-equipment of enterprises is considered. The method developed is intended to verify technological solutions of projects of technical re-equipment of enterprises according to indicators of productivity.     

Definition of Wingtip Devices Shape and Dimensions for a Subsonic Airliner

The results of flow field numerical simulation on the typical wing-body prototype of the modern DLR-F4 airliner under sub- and transonic compressible air flow are presented. Using the DLR-F4 CAD model, the effect of the wingtip end plate area and of the cant angle of a typical Whitcomb winglet is studied. The dependencies of the model lift-to-drag ratio increment on the flat wingtip end plate relative area and on the cant angle of an airfoil Whitcomb winglet are obtained. The concept of an elliptic winglet with a variable cant angle that similar to the winglet used on Airbus A350 is studied. A technique is developed for solving the multi-parameter design optimization task for the Whitcomb winglet, taking the maximum lift-to-drag ratio of the wing as a criterion for optimization.