Working and walking on small asteroids with circumferential ropes

The low gravity of a small asteroid would present a challenge for an astronaut attempting to work on its surface. Extravehicular activities (EVAs) of the sophistication of the Apollo Moon missions are not likely to be possible if astronauts attempt to walk freely on the asteroid, hover above its surface, or anchor locally into the regolith. Manipulating large rocks, drilling, and excavating at multiple locations is a high priority science objective, but would be difficult without a hold-down mechanism. If the asteroid has even a small rotation rate, maneuvering precisely over its surface could be cumbersome. A plausible means of conducting complex EVAs is to tie ropes entirely around the asteroid, under which the astronaut is pushed downward onto the asteroid surface by the tension in the rope. The downward force provides an artificial gravity that permits the astronaut to drill, excavate, hammer, and carefully document materials on the surface without the worry of being thrown from the asteroid. An astronaut could also use the ropes as handholds or guides to maneuver freely over the surface.     

Precipitating Protons and Their Role in Ionization of the Polar Ionosphere

Spatial distributions of the electron density in the latitude range 60°–90° N were calculated on the basis of a physical model of the E and lower Fregions of the high-latitude ionosphere using statistical models of auroral proton and electron precipitation. It is shown that precipitating protons can play the key role in the ionization of the Eregion in the dusk and midnight sectors of the auroral oval. However, quantitative estimates of the contribution of protons to the ionization depend on the used statistical models of electron precipitation. Comparison of the electron density profiles calculated for two incoherent scatter radars, EISCAT (Tromsö) and ESR (Svalbard), for simultaneous precipitation of electrons and protons and for electron precipitation only show that the influence of protons is the most significant in the dusk sector over the EISCAT radar and in the midnight sector over the ESR radar. The results presented indicate the need to take protons into account when radar data are used to derive precipitating electron spectra.     

On the Origin of High-Latitude Boundary Layer of the Earth's Magnetosphere

Localization of the reconnection region at the dayside magnetopause is among the unsolved problems of magnetospheric physics. There are two alternative models, one of which predicts the reconnection at the equatorial magnetopause, and the other predicts the reconnection in the region where the magnetic field of the solar wind flowing around the magnetosphere is antiparallel to the geomagnetic field. The statistical analysis carried out for 53 INTERBALL-1crossings of the high-latitude magnetopause in a special coordinate frame invariant with respect to the interplanetary conditions shows that the model of a reconnection in antiparallel fields agrees well with the experimental data.     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

Drying as one of the extreme factors for the microflora of the atmosphere

An investigation of the effects of drying and drying-rewetting cycles under vacuum conditions of 10(-2) torr at -30 degrees C on conidia of the atmospheric strain Penicillium chrysogenum from 48-77 km heights, collected by meteorological rockets found that survival and restoration of the initial physiological properties were possible through some very efficient protective cellular mechanisms. Such adaptive possibilities explain the widespread diffusion of microbial cells throughout the biosphere of our planet.     

Phugoid oscillations in optimal reentry trajectories

A major problem with operations of lifting reentry vehicle having an aft center-of-gravity location due to large engine mass at the rear is the required hypersonic trim to fight the desired trajectory. This condition is most severe for lifting maneuvers. As a first step toward analyzing this problem, this paper considers the lift requirement for some basic maneuvers in the plane of a great circle. Considerations are given to optimal lift control for achieving the maximization of either the final altitude, speed or range. For the maximum-range problem, phugoid oscillation along an optimal trajectory is less severe as compared to a glide with maximum lift-to-drag ratio. An explicit formula for the number of oscillations for an entry from orbital speed is proposed.     

Shuttle avionics verification and integration testing

The Space Shuttle Orbiter employs a fly-by-wire control system of 200 major avionic hardware devices interfacing with five flight computers through a complex data bus system. Responses to man-in-the-loop commands are dependent on the flight software. Early program development testing of the computer and avionic hardware has been accomplished at Rockwell International's Shuttle Avionics Development Laboratory (ADL). Hardware development has led to complete multi-string system testing and flight software evaluations. This paper provides an overview of the ADL. Its role and test capabilities in support of Shuttle development are defined. The nature of computer driven test programs for the Orbiter displays, the Digital Autopilot, and flight software development describe the test bed provided by the ADL.