Compact high-sensitivity accelerometer-seismometer

Design of a three-axial accelerometer-seismometer, constructed on the basis of two-coordinate sensors (sensitive elements) of high and low accelerations, is considered in the paper. This instrument is applied for gravi-inertial measurements. Basic characteristics of the instrument are described, as well as the technique and results of its standardization.     

Time variations of cosmic-ray helium isotopes with BESS-Polar I

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) is configured with a solenoidal superconducting magnet and a suite of precision particle detectors, including time-of-flight hodoscopes based on plastic scintillators, a silica-aerogel Cherenkov detector, and a high resolution tracking system with a central jet-type drift chamber. The charges of incident particles are determined from energy losses in the scintillators. Their magnetic rigidities (momentum/charge) are measured by reconstructing each particle trajectory in the magnetic field, and their velocities are obtained by using the time-of-flight system. Together, these measurements can accurately identify helium isotopes among the incoming cosmic-ray helium nuclei up to energies in the GeV per nucleon region. The BESS-Polar I instrument flew for 8.5 days over Antarctica from December 13th to December 21st, 2004. Its long-duration flight and large geometric acceptance allow the time variations of isotopic fluxes to be studied for the first time. The time variations of helium isotope fluxes are presented here for rigidities from 1.2 to 2.5 GV and results are compared to previously reported proton data and neutron monitor data.     

New line profiles of Li–H2 for brown dwarfs

In order to calculate the opacity of a gas it is necessary to consider how its constituent atoms are perturbed by the surrounding medium. This is required both in order to calculate the equation of state, and in order to determine the profiles of the spectrum lines. In this work we report new theoretical Li line profiles perturbed by H₂ and their dependence with temperature.     

Difficulties in the study of cosmic radio noise absorption at 30 MHz using riometer at low latitude station,Kolhapur (Lat-16.8°N,Long-74.25°E)

A dual dipole antenna has been installed at low latitude station Kolhapur (Geographic 16.8°N, 74.25°E), Maharashtra, India for the study of cosmic radio noise absorption using Solid State Riometer (which operates at 30 MHz) during pre phase of 24th solar maxima. The aim for this type of study over Kolhapur was to know the response of lower (D region) ionosphere over low latitude by cosmic radio noise absorption using riometer technique during quite period as well as sudden ionospheric disturbances (SID). The observations are being taken for 3 years. Two different sites (∼40 km away from each other) were used for the installation of riometer equipment assuming minimum local noise. It is found that solar noise to cosmic radio noise hence resulting in signal saturation. The night time signal is relatively free of interference but sometimes local noise is responsible for spike-like signatures. Hence it is concluded that Kolhapur (a low latitude station) is not suitable for the study of cosmic radio noise absorption on 30 MHz with riometer and dual dipole antenna. Proper choice for operating frequency of riometer and antenna gain is suggested for low latitude use of this technique for ionospheric deviative and nondeviative absorption studies.     

Height-latitude structure of stationary planetary waves in the stratosphere and lower mesosphere

Daily UK Met Office stratospheric assimilated data for the Northern and Southern Hemispheres, accumulated for the period from 2004 to 2012 and pressure range of 1000–0.1 hPa, are used in this paper. The paper presents and thoroughly discusses spatial–temporal distributions of stationary planetary wave (SPW) amplitudes and phases, calculated on the basis of geopotential height, temperature, zonal and meridional wind data for zonal wave numbers 1 and 2 (SPW1 and SPW2). The climatological planetary wave amplitudes and phases are calculated by extracting waves from three types of data: daily, monthly mean and climatological monthly mean. It has been established that magnitude of amplitudes and height-latitude distribution of amplitudes of SPW1 and SPW2 depend on data processing method for all parameters. It has also been established that height-latitude distribution amplitudes and phases significantly differ for geopotential height, temperature, zonal and meridional wind and depend on wave number and hemisphere. However, height-latitude distributions of phases are little different from each other for the used methods of data processing.     

Langley method applied in study of aerosol optical depth in the Brazilian semiarid region using 500, 670 and 870 nm bands for sun photometer calibration

Due to the high costs of commercial monitoring instruments, a portable sun photometer was developed at INPE/CRN laboratories, operating in four bands, with two bands in the visible spectrum and two in near infrared. The instrument calibration process is performed by applying the classical Langley method. Application of the Langley’s methodology requires a site with high optical stability during the measurements, which is usually found in high altitudes. However, far from being an ideal site, Harrison et al. (1994) report success with applying the Langley method to some data for a site in Boulder, Colorado. Recently, Liu et al. (2011) show that low elevation sites, far away from urban and industrial centers can provide a stable optical depth, similar to high altitudes. In this study we investigated the feasibility of applying the methodology in the semiarid region of northeastern Brazil, far away from pollution areas with low altitudes, for sun photometer calibration. We investigated optical depth stability using two periods of measurements in the year during dry season in austral summer. The first one was in December when the native vegetation naturally dries, losing all its leaves and the second one was in September in the middle of the dry season when the vegetation is still with leaves. The data were distributed during four days in December 2012 and four days in September 2013 totaling eleven half days of collections between mornings and afternoons and by means of fitted line to the data V₀ values were found. Despite the high correlation between the collected data and the fitted line, the study showed a variation between the values of V₀ greater than allowed for sun photometer calibration. The lowest V₀ variation reached in this experiment with values lower than 3% for the bands 500, 670 and 870 nm are displayed in tables. The results indicate that the site needs to be better characterized with studies in more favorable periods, soon after the rainy season.     

Asteroid and comet hazard: Identification problem of observed space objects with the parental bodies

This article focuses on the genetic identification of observed small cosmic bodies with alleged parental bodies; namely, comets, asteroids and meteoroid swarms. There is a problem of the upper D-value limit as a measure of proximity between the orbits of the bodies in the five-dimensional phase space (Southworth and Hawkins, 1963). In the study of genetic relationships of the comet and meteor complexes, the D value is usually taken as equal to 0.2 for all meteor showers. However, the upper D limit should be investigated for each meteoroid complex. For example, such investigation was performed for the Taurid meteor complex (Porub?an et al., 2006). In this paper, the upper D-criterion limit value was investigated for the Perseid meteor shower. The 1862 III Swift–Tuttle comet is its parental comet.     

Extreme deviations of landing parameters for heavy aircraft

We estimate the statistic characteristics and extreme deviations of the state vector components for the Ilyushin Il 96–300 systems at automatic landing.     

Computer-aided design of blank forging production facilities for aircraft engine compressor blades

The computer-aided design (CAD) system is specified for the preproduction engineering of the aircraft engine compressor blades. This system is characterized by a high quality of designing the finishing cutoff and reducing dies. It is shown that a high level of unification and integration in CAD permits the time of designing the punch tool sets to be significantly reduced.