MLS: a total system approach

A typical approach and landing operation is described. The microwave landing system (MLS) is then examined, its design characteristics and how it works are shown, and how the MLS design fulfils the user's operational requirements by protecting the guidance signal from reflected signal interference is highlighted. MLS angle system accuracy is discussed in great detail, and its reliability, integrity, and coverage volume are briefly considered. MLS availability at any runway to all aircraft types and their landing scenarios, which is accomplished using narrow scanning beam antennas, is examined     

Cellular parameters for track structure modeling of radiation hazard in space.

Based on irradiation with 45 MeV/u N and B ions and with Co-60 gamma rays, cellular parameters of Katz's track structure model have been fitted for the survival of V79-379A Chinese hamster lung fibroblasts. Cellular parameters representing neoplastic transformations in C3H10T/1/2 cells after their irradiation with heavy ion beams, taken from earlier work, were also used to model the radiation hazard in deep space, following the system for evaluating, summing and reporting occupational exposures proposed in 1967 by a subcommittee of NCRP. We have performed model calculations of the number of transformations in surviving cells, after a given fluence of heavy charged particles of initial energy 500 MeV/u, penetrating thick layers of cells. We take the product of cell transformation and survival probabilities, calculated along the path lengths of charged particles using cellular survival and transformation parameters, to represent a quantity proportional to the "radiation risk factor" discussed in the NCRP document. The "synergistic" effect of simultaneous charged particle transfers is accounted for by the "track overlap" mode inherent in the model of Katz.     

Cosmic Ray Energetics And Mass for the International Space Station (ISS-CREAM)

The Cosmic Ray Energetics And Mass (CREAM) instrument is configured with a suite of particle detectors to measure TeV cosmic-ray elemental spectra from protons to iron nuclei over a wide energy range. The goal is to extend direct measurements of cosmic-ray composition to the highest energies practical, and thereby have enough overlap with ground based indirect measurements to answer questions on cosmic-ray origin, acceleration and propagation. The balloon-borne CREAM was flown successfully for about 161 days in six flights over Antarctica to measure elemental spectra of Z = 1–26 nuclei over the energy range 10¹⁰ to >10¹⁴ eV. Transforming the balloon instrument into ISS-CREAM involves identification and replacement of components that would be at risk in the International Space Station (ISS) environment, in addition to assessing safety and mission assurance concerns. The transformation process includes rigorous testing of components to reduce risks and increase survivability on the launch vehicle and operations on the ISS without negatively impacting the heritage of the successful CREAM design. The project status, including results from the ongoing analysis of existing data and, particularly, plans to increase the exposure factor by another order of magnitude utilizing the International Space Station are presented.     

Global Response of Martian Plasma Environment to an Interplanetary Structure: From Ena and Plasma Observations at Mars

As a part of the global plasma environment study of Mars and its response to the solar wind, we have analyzed a peculiar case of the subsolar energetic neutral atom (ENA) jet observed on June 7, 2004 by the Neutral Particle Detector (NPD) on board the Mars Express satellite. The “subsolar ENA jet” is generated by the interaction between the solar wind and the Martian exosphere, and is one of the most intense sources of ENA flux observed in the vicinity of Mars. On June 7, 2004 (orbit 485 of Mars Express), the NPD observed a very intense subsolar ENA jet, which then abruptly decreased within ∼10 sec followed by quasi-periodic (∼1 min) flux variations. Simultaneously, the plasma sensors detected a solar wind structure, which was most likely an interplanetary shock surface. The abrupt decrease of the ENA flux and the quasi-periodic flux variations can be understood in the framework of the global response of the Martian plasma obstacle to the interplanetary shock. The generation region of the subsolar ENA jet was pushed towards the planet by the interplanetary shock; and therefore, Mars Express went out of the ENA jet region. Associated global vibrations of the Martian plasma obstacle may have been the cause of the quasi-periodic flux variations of the ENA flux at the spacecraft location.     

称重传感器的一种新的滞后补偿方法(英文)

通过对电阻应变式称重传感器在各种加载卸载情况下的滞后特性的分析 ,建立了其相应的数学模型 ,并初步探讨了一种可以通过程序在仪表中对传感器的重要指标—滞后进行补偿从而提高整个传感器的精度的方法。最后 ,对以上方法进行了验证性试验 ,证明了补偿方法的可行性。     

On the problem of lunar radiation environment

In connection with projects of manned bases on the Moon it becomes topical to estimate radiation danger for their inhabitants. In this paper we describe a method of evaluation of the radiation environment on the lunar surface produced by galactic and solar cosmic rays. The roles of both primary and secondary radiations generated in the depth of the lunar soil under the action of high-energy protons and nuclei are taken into account. Calculated fluxes of particles are used in order to estimate annual averaged absorbed and equivalent local dose rates in tissues. It is established that in the lunar rock the contribution of secondary neutrons to the dose rate exceeds that of protons. The contribution of the secondary particles generated by nuclei of galactic cosmic rays to the dose rate is estimated.     

A method for constructing an airfoil using a specified chord velocity diagram

A problem of determining a shape of the airfoil being streamlined by a potential incompressible inviscid flow is solved by the successive approximation method using a specified chord velocity diagram. It is shown that a closed airfoil that possesses a specified chord velocity diagram can be constructed with a sufficient accuracy; if the chord diagram is unsuccessfully specified, the closed airfoil may prove to be not univalent, that is, physically unrealizable.     

Experimental study on the PRE-X vehicle focusing on the transitional shock-wave/boundary-layer interactions

This article is devoted to the experimental works carried out in the R2Ch blow-down wind tunnel in the framework of the atmospheric re-entry PRE-X demonstrator program and to the fundamental studies performed on a hollow cylinder-flare relative to crucial problem of the transitional shock-wave/boundary-layer interaction.Shock-wave/boundary-layer interactions in hypersonic flows may have major consequences on thermal loads, especially if the shock is strong enough to induce separation. The heat-flux density levels in the interaction region strongly depend on the nature, laminar or turbulent of the boundary-layer. Special attention should be paid to transitional interactions, which are likely to exist at altitude where the Mach number is high and the density low.The wide Reynolds number range achievable in the R2Ch facility and reliable heat-flux measurements by infrared thermography have allowed to investigate the viscous interaction on the deflected flaps of the demonstrator model and to point out the laminar-to-turbulent boundary-layer natural and forced transition, in the light of the in-depth analysis of results obtained from the hollow cylinder-flare study.