Lunar Exploration Neutron Detector for the NASA Lunar Reconnaissance Orbiter

The design of the Lunar Exploration Neutron Detector (LEND) experiment is presented, which was optimized to address several of the primary measurement requirements of NASA’s Lunar Reconnaissance Orbiter (LRO): high spatial resolution hydrogen mapping of the Moon’s upper-most surface, identification of putative deposits of appreciable near-surface water ice in the Moon’s polar cold traps, and characterization of the human-relevant space radiation environment in lunar orbit. A comprehensive program of LEND instrument physical calibrations is discussed and the baseline scenario of LEND observations from the primary LRO lunar orbit is presented. LEND data products will be useful for determining the next stages of the emerging global lunar exploration program, and they will facilitate the study of the physics of hydrogen implantation and diffusion in the regolith, test the presence of water ice deposits in lunar cold polar traps, and investigate the role of neutrons within the radiation environment of the shallow lunar surface.     

Shear flow energy redistribution stipulated by the internal-gravity wavy structures in the dissipative ionosphere

The linear mechanism of generation, intensification and further nonlinear dynamics of internal gravity waves (IGW) in stably stratified dissipative ionosphere with non-uniform zonal wind (shear flow) is studied. In case of the shear flows the operators of linear problem are non-selfadjoint, and the corresponding Eigen functions – nonorthogonal. Thus, canonical – modal approach is of less use studying such motions. Non-modal mathematical analysis becomes more adequate for such problems. On the basis of non-modal approach, the equations of dynamics and the energy transfer of IGW disturbances in the ionosphere with a shear flow is obtained. Exact analytical solutions of the linear as well as the nonlinear dynamic equations of the problem are built. The increment of shear instability of IGW is defined. It is revealed that the transient amplification of IGW disturbances due time does not flow exponentially, but in algebraic – power law manner. The effectiveness of the linear amplification mechanism of IGW at interaction with non-uniform zonal wind is analyzed. It is shown that at initial linear stage of evolution IGW effectively temporarily draws energy from the shear flow significantly increasing (by an order of magnitude) own amplitude and energy. With amplitude growth the nonlinear mechanism turns on and the process ends with self-organization of nonlinear solitary, strongly localized IGW vortex structures (the monopole vortex, the transverse vortex chain or the longitudinal vortex street). Accumulation of these vortices in the ionospheric medium can create the strongly turbulent state.     

The Balloon Array for RBSP Relativistic Electron Losses (BARREL)

BARREL is a multiple-balloon investigation designed to study electron losses from Earth’s Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL augments the Radiation Belt Storm Probes mission by providing measurements of relativistic electron precipitation with a pair of Antarctic balloon campaigns that will be conducted during the Austral summers (January-February) of 2013 and 2014. During each campaign, a total of 20 small (～20 kg) stratospheric balloons will be successively launched to maintain an array of ～5 payloads spread across ～6 hours of magnetic local time in the region that magnetically maps to the radiation belts. Each balloon carries an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL will provide the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles are available, and will characterize the spatial scale of precipitation at relativistic energies. All data and analysis software will be made freely available to the scientific community.     

Simulation of liferaft string water drop

A mathematical model of motion for a string of liferafts being water dropped is presented under the assumption of a plane system motion. An example of calculations is given.     

Optimal design of composite lattice shell structures for aerospace applications

An optimization method for composite lattice shell structures under axially compressive loads is proposed aiming at the preliminary design. The method implements and improves some previous results of the fully analytical approach which is currently adopted at the state-of-the-art. The fully analytical approach provides the minimum mass solution under buckling and strength constraints, irrespective of other possible design limitations, such as, shell stiffness constraints. As a consequence, the minimum mass solution turns out to be satisfactory whereas other requirements are absent or automatically achieved but, on the contrary, it can drive the final preliminary configuration far from the real optimum.The proposed method implements numerical minimization allowing the designer to easily handle suboptimal configurations which are located in the vicinity of the minimum mass solution. When stiffness requirement is present (as in most cases) the benefit of this approach – in terms of weight saving with respect to the analytical design – is finally shown with a practical example.     

Human and robotic repair of a solar array wing during ISS assembly mission 10A

With the installation of a new module and the relocation of three other modules, including multiple hand-offs from the station arm (SSRMS) to the shuttle arm (SRMS), International Space Station (ISS) assembly mission 10A/STS-120 was anticipated to be one of the most complicated ISS assembly missions ever attempted. The assembly operations became even more complex when a solar array wing (SAW) on the relocated Port-6 (P6) truss segment ripped while being extended. Repairing the torn SAW became the single most important objective for the remainder of STS-120, with future ISS assembly missions threatened by reduced power generation capacity if the SAW could not be repaired. Precise coordination between the space shuttle and ISS robotics teams led to an operational concept that combined the capabilities of the SRMS and SSRMS robotic systems in ways far beyond their original design capacities. Benefits of consistent standards for ISS robotic interfaces have been previously identified, but the advantages of having two such versatile and compatible robotic systems have never been quite so spectacular. This paper describes the role of robotics in the emergency SAW repair and highlights how versatility within space robotics systems can allow operations far beyond the intended design scenarios.     

巴西航空工业公司瞄准军用运输机市场

巴西航空工业公司希望于今年底前决定是否开始研制一种军用运输机,以拓展其防务业务。     

The high-latitude ionosphere structure on 22 March, 1979 magnetic storm from multi-satellite and ground-based observation

Variations in the high-latitude ionosphere structure during March 22, 1979 geomagnetic storm are examined. Electron density Ne and temperature Te from the Cosmos-900 satellite, NmF2, Ne and He⁺ from the ISS-b satellite, precipitation of soft electrons from the Intercosmos-19 satellite, and the global picture of the auroral electron precipitation from the DMSP, TIROS and P78 satellites are used. These multi-satellite databases allow us to investigate the storm-time variations in the locations of the following ionospheric structures: the day-time cusp, the equatorial boundary of the diffuse auroral precipitation (DPB), the main ionospheric trough (MIT), the day-time trough, the ring ionospheric trough (RIT) and the light ions trough (LIT). The variations in NmF2, Ne, He⁺ and Te in the high-latitude ionosphere for the different local time sectors are analyzed also. The features of the high-latitude ionospheric response to a strong magnetic storm are described.     

Installation and preliminary data analysis of Penang magnetic data Acquisition system (MAGDAS) in Malaysia

MAGDAS PEN was established on 19th September 2019 as one of the MAGDAS observatory arrays located at Universiti Sains Malaysia (USM) (5.15°, 100.50°). The main objective of the MAGDAS project is to monitor global electromagnetic and the ambient plasma density in the geospace environment. This installation has contributed to a better understanding of the Sun-Earth coupling system. This paper presents the installation process of one of the MAGDAS magnetometers named YU-8 T magnetic sensor and provides a preliminary analysis of geomagnetic HDZ components amplitude-time that was observed at PEN station. A one-month HDZ-geomagnetic field data was processed from 1st November to 30th November 2019. The daily variations with a consistent pattern in delta H geomagnetic field components are observed throughout the day with eastward electric field effects that are observed during solar peak hours. The delta H-component gradually increases around 0700LT and reaches the maximum reading at 1300LT with a range of value ~ 40-70nT. The value slowly decreases that started from 1400LT until the night time. The reading during the night time shows a constant variation with magnitude varies in between ?10nT to + 10nT. The average H-component value of the night time is used as the baseline for the observation system. Overall, the observed trends portray a good sign of solar quiet field and Sq with no solar-terrestrial disturbances.