Nickel-Cadmium Batteries as Capacitive Filters for Pulsed Loads

This investigation consisted of several tests of specially fabricated nickel-cadmium batteries having circular disk-type electrodes. These batteries were evaluated as filter elements between a constant current power supply and a 5 Hz pulsed load demanding approximately twice the power supply current during the load on a portion of the cycle. Short tests lasting 104 cycles were conducted at up to a 21 C rate and an equivalent energy density of over 40 J/Ib. In addition, two batteries were subjected to 10h dischar cycles, one at a 6.5 C rate and the other at a 13 C rate. Assuming an electrode-to-battery weight ratio of 0.5, these tests represent an energy density of about 7 and 14 J/Ib, respectively. Energy density, efficiency, capacitance, average voltage, and available capacity were tracked during these tests. After 10y capacity degradation was negligible for one battery and about 20 percent for the other. Cadmium electrode failure may be the factor limiting lifetime at extremely low depth of discharge cycling. The output was examined and a simple equivalent circuit was proposed.     

Processing of nutritious, safe and acceptable foods from CELSS candidate crops.

A controlled ecological life-support system (CELSS) is required to sustain life for long-duration space missions. The challenge is preparing a wide variety of tasty, familiar, and nutritious foods from CELSS candidate crops under space environmental conditions. Conventional food processing technologies will have to be modified to adapt to the space environment. Extrusion is one of the processes being examined as a means of converting raw plant biomass into familiar foods. A nutrition-improved pasta has been developed using cowpea as a replacement for a portion of the durum semolina. A freeze-drying system that simulates the space conditions has also been developed. Other technologies that would fulfill the requirements of a CELSS will also be addressed.     

Macrosegregation during crystal growth in horizontal bridgman boat

This paper is devoted to direct numerical simulation of the fluid flow and macrosegregation in horizontal Bridgman systems. Results concerning the fluid flows at Pr=0 and Pr=0.015 are given for various values of Gr and in situation where the melt-crystal interface is at rest. Practical laws concerning the behaviour of the mass transport and the level of inhomogeneity in the cavity are derived. The effects of some parameters such as Gr, Sc and the pulling speed on the concentration repartition in the two phases melt and crystal are studied and the average concentration in the crystal is shown for various situations.     

Design and analysis of a microprocessor-controlledpeak-power-tracking system [for solar cell arrays]

Stability and dynamics of a series configuration peak-power tracking (PPT) system are analyzed. The operating modes of the system, as well as mode transitions, are investigated based on qualitative graphical representations of dc load lines at various interfaces of the system. Analysis of multiloop control in the PPT mode is discussed. This includes the design of the inner voltage loop and analysis of the closed-loop system stability around the peak-power point. For an optimum dynamic performance and stability, design parameters of the inner voltage loop and the outer PPT loop are identified. Experimental verifications, supported by simulation results, are performed     

Galileo probe battery system

NASA's pair of Galileo spacecraft arrived at Jupiter on 7 December 1995. The Probe descended into the upper Jovian atmosphere, performing its planned sequence of scientific measurements of the properties of that medium for about an hour. This Probe has been the most ambitious planetary entry vehicle to date. It evolved over several years of planning and construction, its launch was postponed many times, for a variety of reasons; and it required more than 6 years of travel after launch to reach the planet. Its electrical power was provided by a primary Li-SO₂ battery, supplemented with two thermal batteries (CaCrO₄-Ca) used for firing pyrotechnic initiators during the atmospheric entry. These power sources were designed to be robust, to assure they would perform their intended function after surviving several years in space. This paper discusses the final production, qualification, and the systems testing of these batteries prior to and following launch. Their excellent performance at Jupiter confirmed their life enhancement design features     

Structure of cress root statocytes in microgravity (Bion-10 mission).

Experiments on primary roots of Lepidium sativum L. have been performed on board the Bion-10 satellite. The experimental set-up was extremely miniaturized and completely automatic. The results demonstrate the effectiveness of the instrumentation. The spatial orientation, growth, root cap differentiation and statocyte structure of roots grown under microgravity (MG) have been compared with control roots grown on the ground (GC) and in a 1G-reference centrifuge in space (RC). Root length and cap shape did not differ between MG and control samples. Under MG, the mean distance of the statoliths from the distal cell wall of the statocytes increased significantly, the mean distance of the mitochondria decreased and the nucleus did not change its position in comparison to both controls. The number and the shape of the amyloplasts (statoliths) were not influenced by the space flight factors, but their size as well as their relative area in the cell decreased. The number of starch grains per statolith as well as their size and shape changed under MG. In MG and RC samples the number of lipid bodies in the statocytes was higher and the relative area larger than in GC samples. The relative area occupied by vacuoles was greater in RC statocytes than in GC and MG statocytes. These results partly confirm and, in addition, extend the data from earlier experiments in space.     

An optimized GPS carrier phase ambiguity search method focusing onspeed and reliability

An optimized ambiguity search method is described in this paper focusing on speed and reliability. The method has incorporated several existing fast ambiguity search concepts and the ambiguity search speed can be further improved. In addition to the improvement of the ambiguity search speed, special attention has been paid to the improvement of the reliability of the ambiguity search process. Several theoretical and practical aspects involved in an ambiguity search algorithm are also addressed which have not been explored in previous literatures