压力及铸型材料对Al-Si合金致密度的影响

研究了压力及铸型材料对差压铸造Al-Si合金致密度的影响。试验表明:提高压力,可以使冒口的补缩作用增强,铸件的致密度提高。改变铸型的冷却速度,可以使铸件整体的致密度提高。在较高的压力下铸件各个部分的致密度比较接近。     

行星车视觉导航与自主控制进展与展望

以视觉为主的行星车自主地形感知、导航、规划与控制系统是其安全高效探测的重要保障。本文通过对已成功开展和计划中的系列行星车任务导航与控制系统进行汇总，重点梳理了行星车多源地形感知、自主全局和局部导航、自主路径规划与控制等若干关键问题的进展情况，展望了未来自主化、智能化的发展趋势，并结合任务需求构建了行星车视觉导航与自主控制研究框架设想。     

飞机制造工艺信息系统关键技术研究与实现

研究了飞机制造工艺信息系统的关键技术,包括基于架次的以工艺组件为核心的MBOM管理、AO/FO动态图形工艺设计界面的实现、以AO为核心的飞机装配工艺规划、基于FO的飞机零件制造管理.飞机制造工艺信息系统已在生产中实际应用.     

展成电解加工整体叶轮扭曲叶片中的间隙分析

叙述了展成电解加工整体叶轮扭曲叶片中间隙的计算方法,并讨论了工件和阴极各运动速度对间隙的影响。     

采用新技术的维修信息系统设计

阐述了一种现代航空装备维修信息系统的设计方法.该信息系统利用维修专家系统、故障诊断、维修决策和维修支援等新技术,大大提高了航空装备维修的自动化水平.     

A self-healing strategy with fault-cell reutilization of bio-inspired hardware

The self-healing strategy is a key component in designing the bio-inspired embryonics circuit with the structure of cell arrays. However, the existing self-healing strategies of embryonics circuits mainly focus on permanent faults inside the modules of cells such as the function module and the configuration register, while little attention is paid to transient faults. From the point of view of obtaining high efficiency of hardware utilization, it would be a huge waste of hardware resources by permanent elimination when a cell only suffers a transient fault which can be repaired by a configuration mechanism. A new self-healing strategy, the Fault-Cell Reutilization Self-healing Strategy(FCRSS) which presents a method for reusing transient fault cells, is proposed in this paper. The circuit structures of all the modules in the cells are described in detail. In the new strategy, two processes of elimination and reconfiguration are combined. Within the process of fault-cell elimination, cells with transient faults in the embryonics circuit array could be reused simultaneously to replace the functions of the cells on their left side in the same row. Therefore, transient fault-cells in a transparent state can be reconfigured to realize the fault-cell reutilization. Finally,a circuit simulation, resource consumption, a reliability analysis and a detailed normalization analysis are presented. The FCRSS can improve the hardware utilization rate and system reliability at the expense of a small amount of hardware resources and reconfiguration time. Following the conclusion, the method of determining the optimal self-healing strategy is presented according to the environmental conditions.     

Design and application of an air-cooled probe for total pressure measurement at combustor outlet

An air-cooled probe was designed for measurement of total pressure at combustor outlet; its cooling scheme combined the film cooling and convection cooling. With the aid of CFD technique, cooling effectiveness of the coolant jets at various blow ratios was compared; suitable blow ratios and configuration of film holes were chosen accordingly. The overall cooling performance of the probe was evaluated via CFD technique, the design was improved according to the simulation result, and the cooling effect of the leading edge was obviously strengthened by increasing the local coolant mass flow rate. The results of wind tunnel test indicated that, between Mach numbers 0.2 and 0.4, the probe achieved a high accuracy at various attack angles. The probe was utilized in an annular combustor rig test, the highest temperature reached 1760K and total pressure reaches 1036kPa. The result of rig test demonstrates that the coolant film distribution consistent appropriately with the CFD results.      

一种星载微波接收机应用的全集成厚膜电源设计

应新一代小型化、轻量化星载微波接收机需求,借鉴引进的国外微波接收机全集成厚膜电源设计理念,采用轻质化硅铝材料和LTCC厚膜集成技术的新方案设计了一种应用于星载微波接收机的全集成厚膜电源.该厚膜电源模块为全集成设计,除了实现DC-DC基本功能,还集成了EMI滤波器以及多个功能电路单元,模块可直接和卫星平台配电系统对接.本...     

一种新型的角加速度传感器

对一种新型角加速度传感器的工作原理和一些关键技术进行了阐述和分析。     

胶-螺混合连接结构强度分析及影响因素研究

为深入分析胶-螺混合连接结构强度及影响因素,利用ABAQUS平台建立胶-螺混合连接三维渐进损伤模型,采用界面层损伤判据及退化方法来模拟胶层的损伤破坏。首先,将胶-螺混合连接结构强度分别与胶接结构、螺接结构强度进行对比,详细阐释胶-螺混合连接结构与胶接结构承载机理及胶接区应力分布形式;然后,分析讨论钉头形式及宽径比对混合连接结构强度和损伤形式的影响。结果表明：胶-螺混合连接结构强度优于胶接结构和螺接结构,并得到了可有效提高结构强度的钉头形式及最佳宽径比。