不规则裂纹宽度的一种分段评定法

针对表面裂纹边缘轮廓的不规则特性,提出了一种分段宽度评定方法.利用计算机数字图像处理的方法,在获得表面图像后,对该图像沿纵向进行分段,分别对每段的裂纹宽度用Ferret算法进行评定.为了比较不同的分段方法的优劣,提出有用信息利用率的概念,从几种分段方法中选出一种最优的方法进行分段评定,最后得出该裂纹宽度的定量评定.经过实例验证,用此方法可以定量评定裂纹的宽度,评定的结果可以为机械结构表面检测提供有效依据,该方法也可应用于一般不规则图形几何尺寸的定量评定.      

转子支承动刚度对转子动力特性的影响分析

针对转子支承动刚度对转子动力特性的影响,分别运用静刚度、动刚度和整机有限元模型对某型发动机进行了转子动力特性计算,并对各种计算结果进行了比较和分析;分析了转子支承动刚度剧烈变化的原因,同时,指出运用整机模型能够分析支承动刚度和各种机匣的局部振动对整机振动的影响。     

模态密集柔性空间结构二阶内平衡降阶

 给出一种针对二阶线性系统方程直接进行降阶的二阶系统内平衡降阶方法。大型柔性空间结构动力学方程采用二阶线性微分方程描述,采用传统的一阶内平衡降阶方法降阶后的状态方程是一阶形式,破坏了原系统的二阶结构和物理意义。采用新方法降阶后的系统可以保持原系统二阶结构,同时可以进一步保持原系统的对称和正定特性。柔性空间结构系统级降阶的柔性模态方程通常为对角形式,针对这种特殊形式,系统可控和可观Gramian矩阵存在闭合解析解,给出了闭合解的具体表达形式。数值仿真结果表明,二阶内平衡降阶方法可以达到一阶内平衡方法一样的降阶精度,Gramian矩阵的闭合解析解可以大幅度提高Lyapunov方程求解速度。     

地面力学在火星壤力学参数估计研究中的 进展与展望

掌握火星土壤的力学参数是保障火星车顺利完成巡视探测的关键。通过对已成功开展的火星巡视探测任务进行汇总，探讨了复杂火星地貌对火星车移动性能的影响，分析了基于地面力学理论的火星土壤力学参数估计方法，包括：基于车轮的火星壤在轨力学参数估计方法和基于轮壤力学模型的力学参数辨识方法。最后，对未来关于地面力学在星壤力学参数评估进行了探讨。     

Formation of polymer micro-agglomerations in ultralow-binder-content composite based on lunar soil simulant

We report results from an experiment on high-pressure compaction of lunar soil simulant (LSS) mixed with 2–5?wt% polymer binder. The LSS grains can be strongly held together, forming an inorganic-organic monolith (IOM) with the flexural strength around 30–40?MPa. The compaction pressure, the number of loadings, the binder content, and the compaction duration are important factors. The LSS-based IOM remains strong from ?200?°C to 130?°C, and is quite gas permeable.     

基于熵-AHP融合的空袭目标威胁度量与排序

针对传统防空作战时对目标威胁评价主观性强、排序逻辑刻板的问题,提出基于熵值法与层次分析法(AHP)融合赋权的空袭目标威胁度量与排序方法。首先结合空战态势分析影响目标对我防空阵地威胁度的各属性因素,同时给出影响因素的威胁隶属度函数,然后利用熵值法和AHP赋权并相继采用加权求和、乘法合成、几何平均的方法进行二次融合,所获权重用于各目标威胁度的综合度量及排序。仿真结果表明,二次融合权重兼取熵值法与AHP的赋权特点,度量方法更为合理,排序结果更加贴合真实战场态势,可信度高。     

Deployment simulation of a scalable planar gossamer space structure based on Miura-ori pattern

Miura-ori is a rigid origami structure utilized in the packaging of deployable solar panels for use in space or in the folding of maps. It's pattern can largely reduce the membrane stress and improve the work efficiency. Inspired by origami structures, we numerically and experimentally studied a scalable solar sail structure. As an improvement of the existing membrane simulations, a variable Poisson's ratio model considering the wrinkling effect of the membrane was introduced. We focused on a quadrant shape and studied how its geometry parameters and initial imperfections affect the membrane mechanical behavior. We also designed and fabricated a pantographic mechanism as an origami membrane actuator. In addition, design protocols of deployment applied to a scalable gossamer structure were proposed.     

Comparison of RO tropopause height based on different tropopause determination methods

The tropopause is an important boundary in the Earth’s atmosphere, and has been the subject of close attention from atmosphere and climate researchers. To monitor the global tropopause using radio occultation (RO) data, there are two primary methods, one is the widely used temperature lapse rate method, and the other is the bending angle covariance transform method which is unique to RO data. We use FengYun3-C (FY3C) and Meteorological Operational Satellite Program (MetOp) RO data and European Centre for Medium-Range Weather Forecasts (ECMWF) operational analysis data to determine differences in RO tropopause height calculated by these two methods. We compute biases of the RO lapse rate tropopause height (LRTH) and the RO bending angle tropopause height (BATH) relative to the ECMWF LRTH. The dependences of the tropopause height biases on tropopause height (TPH) retrieval method, latitude, season and RO mission are investigated. The results indicate that BATH show a consistent 0.8–1.2 km positive bias over the tropics and high latitude regions compared with LRTH, however, over 25° to 40° latitude in both hemisphere, BATH results are less stable. Furthermore, the mean bias between BATH and LRTH displayed a different symmetrical characteristic from 2017.12 to 2018.2 (DJF) compared to 2018.6–2018.8 (JJA). However, except for some bias over Antarctica, the mean value of both LRTH and BATH show a similar tropopause variation, indicating the consistency of both methods.     

基于疲劳寿命的复合材料舱体分级优化分析

为构建三维应力状态复材结构疲劳寿命模型,提出由刚性元和弹簧元来模拟层间作用,结合二维板元构建三维有限元模型。借助典型应力比下的疲劳试验结果和损伤模型,结合等寿命曲线转化理论,发展一种任意应力比下的疲劳寿命分析方法。引入复合累积损伤建立多轴循环应力下的疲劳寿命模型。借助应力分析、静强度和疲劳累积损伤失效分析及材料性能退化模型,模拟面内和层间损伤产生、发展直至整体破坏过程,得到疲劳寿命。通过层合板疲劳寿命预测值和试验结果对比,验证所建模型的正确性。考虑设计变量空间复杂性,采用二级优化方法:系统级布局优化和子系统级尺寸优化。采用自适应遗传算法,以质量最小为目标函数,以疲劳寿命要求为约束条件,对复材舱体进行优化。建立基于多轴应力疲劳寿命的复材结构优化框架,为复材结构优化设计提供参考。      

基于CPCI总线的图像数据采集和回放系统设计

针对红外或可见光的高速率、大容量实时视频存储问题,设计并实现了基于CPCI总线的图像数据采集和回放系统.介绍了该系统的基本原理、功能组成和软件设计.着重阐述了3U的LVDS总线视频采集CompactPCI板卡的硬件、接口电路和FPGA设计.系统具有高速率、大容量、宽温存储、长时间和视频全程回放等优点.实际工程应用表明,该系统运行稳定.