同时性问题研究(一)

本文对狭义相对论同时性的相对性观点进行了分析，并提出狭义相对论在同时性的相对性问题的分析上有逻辑上的错误。关于同时性问题，文中提出了一个不同于相对论的观点，并与相对论的观点进行了比较。自1887年沃依格特（Voigt）给出了洛伦兹变换式，该变换式在近代物理学上起着重要作用，相对论在数学上就是以该变换式为基础的。但是，100多年来还无人对它作出物理解释，本文对洛伦兹变换式作出了明确的物理解释，并得出了在同一惯性参考系内，与一个事件相联系的静止点与运动点之间以洛伦兹变换式相联系的重要结论。它与相对论将洛伦兹变换作为两个作相对运动的惯性坐标系间事件的坐标变换式有重大区别。     

体育场挑蓬风荷载模拟实验研究

能容纳五万多观众的浙江省黄龙体育中心主体育场,在观众席上建有能遮挡风雨的挑蓬,挑蓬之大达座席覆盖率９０％以上,总面积２１０００ｍ２。挑蓬被支撑在外环梁和由斜拉索吊拉的内环梁上。大跨度梁结构受力问题,是建筑结构业一个十分复杂的问题,而杭州地区的地理位置处于我国的台风区,更显出风荷载影响的严重性。因此需对体育场置于大气边界层风洞中进行风荷载模拟实验,以取得合理的挑蓬体型系数,为结构设计的合理性和可靠性提供重要依据。最终可以节省建筑物的造价。     

一种具有高抗干扰能力测温信号隔离变送器的设计与实现

针对工作环境中一些通讯工具产生较强干扰信号的问题,设计并研制了一种测温信号隔离变送器,该变送器使用差分及隔离放大电路,能够有效抑制干扰信号。测试结果表明,该变送器测量精度高,对干扰信号有较强的抑制能力,具较好的工程应用价值。     

基于应变测量方法的卫星天线阵列变形检测

文章介绍了基于应变测量的卫星天线变形检测方法。该方法针对卫星天线在实际工作中产生的阵列形变,应用弹性力学的有关理论和解析方法,通过测量天线阵列单元面板表面的应变数据推导并拟合出天线阵列弯曲的挠度函数,绘制出天线阵列单元的变形构型。实验表明,该方法有较高的精度,能够为天线输出信号的相位校正控制提供依据。     

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

中国航天器的发射总个数进入三位数

1 引言 2007年4月中旬,中国航天在太空奏响了两曲凯歌.是月11日、14日,中国的第二颗海洋探测卫星--海洋1号B星和中国北斗卫星导航系统建设计划中的第一颗导航卫星--北斗M1号卫星(将运行于距地面21500km高度的圆轨道)相继发射成功.     

月表地形环境对着陆器热控系统的影响分析

月球着陆器着陆月表之后的外热流环境与地球轨道卫星外热流环境的最大区别在于月表红外热流的影响.分析月表地形特征是确定月表红外热流影响范围的基础.文章根据调研分析选择了月海地区可能存在的平坦月表、斜坡、石块和撞击坑4种典型地形特征以及月表的热物性参数,并通过计算分析得出了月表地形对着陆器热控系统的一些影响规律--其中平坦月表和斜坡的影响最大,石块和小型撞击坑的影响可以忽略,大型撞击坑可以等效为斜坡的影响.     

液氢贮箱停放过程中的力热分析

为了寻找到运载火箭长时间停放过程中液氢贮箱的最经济液位,用于制定合理的发射流程以及紧急处置方法,采用计算流体力学(CFD)技术,对某型运载火箭停放期间液氢贮箱的力、热情况进行了仿真计算和分析。计算选用了VOF(Volume-of-fluid)两相流模型以及Lee相变模型,为了提高Lee模型在不同压力情况下对相变过程的模拟精度,采用安托因方程修正了该模型。修正后的模型首先由试验数据校验了其精确性,随后开展的液氢贮箱停放过程仿真结果表明：贮箱的竖直方向与径向均存在温度分层的现象,液相内会形成大的漩涡,该漩涡会使得冷热流体不断进行热交换,并导致贮箱内部的液氢出现气化。贮箱停放期间蒸发率最大值超过2 m 3/h,发生在停放4 h左右;而贮箱液位充填至37 m 3以上或17 m 3以下时蒸发率较低,最小值接近1 m 3/h。     

微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中,聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱,提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型,研究了重构过程中各运动模块对本体姿态的影响,提出当每两个运动模块位置与转动方向满足对称性条件时,两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论,在A*算法中引入最优分配度量和对称性判定,设计了并行对称重构规划算法。仿真结果表明,该规划算法可实现重构过程中多模块并行、对称运动,重构过程总步数较少,运动模块对本体姿态的影响小。