A novel autonomous low-cost on-board data handling architecture for a pin-point planetary lander

There has been increased interest in the exploration of the Moon in recent years. Pin-point precision landing is highly desirable for future lunar missions. This paper is concerned with the design of the on-board data handling (OBDH) subsystem for the pin-point lunar lander of the Magnolia-1 project, funded by NASA. Four proposed on-board data handling architectures are outlined and compared in terms of power consumption, performance and reliability. Implementation results are presented, which are obtained from prototyping of the flight computer for the optimal OBDH architecture option on a Xilinx Virtex-5 Field Programmable Gate Array.     

Dynamics of the low altitude secondary proton radiation belt

At the interface between the upper atmosphere and the radiation belt region, there exists a secondary radiation belt consisting mainly of energetic ions that have become neutralized in the ring current and the main radiation belt and then re-ionized by collisions in the inner exosphere. The time history of the proton fluxes in the 0.64 – 35 MeV energy range was traced in the equatorial region beneath the main radiation belts during the three year period from 21 February 1984 to 26 March 1987 using data obtained with the HEP experiment on board the Japanese OHZORA satellite. During most of this period a fairly small proton flux of −1.2 cm⁻² s⁻¹ sr⁻¹ was detected on geomagnetic field lines in the range 1.05 < L < 1.15. We report a few surprisingly deep and rapid flux decreases (flux reduction by typically two orders of magnitude). These flux decreases were also long in duration (lasting up to three months). We also registered abrupt flux increases where the magnitude of the proton flux enhancements could reach three orders of magnitude with an enhancement duration of 1–3 days. Possible reasons for these unexpected phenomena are discussed.     

Capacity building in emerging space nations: Experiences,challenges and benefits

This paper focuses on ways in which space is being used to build capacity in science and technology in order to:     

Time constants in the ionosphere from neural network models

Neural network (NN) models for the low latitude and the polar ionosphere from the D- to the F-region were developed which are based on incoherent scatter radar data from Arecibo and EISCAT Svalbard, respectively. The various geophysical input parameters defining the NN are not only the ones that represent the time one wants to predict, but also the geophysical conditions prior to the time of the prediction. The optimum length of these preceding periods are derived for the two models are different, but a period of 60 days is a compromise acceptable for both latitudes. Furthermore from the Arecibo data time constants of electron density decay after sundown are derived which – arguably – are also relevant elsewhere, including the polar latitudes. Whereas at all altitudes the electron densities decay exponentially after sundown, below 300 km there is an additional variation with solar zenith angle.     

Spaceflight hardware allowing unilateral irradiation and chemical fixation in petri dishes.

To accommodate a spaceflight experiment with moss (SPM), experiment-unique equipment (EUE) was developed by engineers at Kennedy Space Center. The hardware allows sterile culture for an extended period of time in commercial petri dishes, lateral illumination of each culture with light of a specific wavelength (660 nm; other wavelengths are possible) and a range of intensities (0.05-5 micromoles photons m-2 s-1), incubation in complete darkness, and chemical fixation to terminate the experiment under conditions of microgravity. The use of a fixative required triple containment to protect the astronaut crew. An external panel on the experiment container allowed the timing of illumination and fixation to be controlled by the crew. Light quality is provided by light emitting diodes (LEDs) that are located in the lid of the outer container, the BRIC (Biological Research In Canisters)-LED. Each canister accommodates 6 Petri Dish Fixation Units (PDFUs), and each PDFU holds one 6 cm petri dish. All components are autoclavable. LED illumination is piped through a transparent glass rod. Each PDFU contains fixative in a reservoir that is released by the depression of an actuator. This hardware performed well during its first flight, the 16-day STS-87 mission in Nov./Dec., 1997 as part of the Collaborative USA and Ukrainian Experiment (CUE). It supported vigorous and sterile moss growth, cells were maintained in position and were well-fixed, and there was a vigorous and consistent response to light. Although here used for moss, in future flight experiments this unique new hardware can be used for many types of organisms normally grown in petri dishes, with or without a requirement for illumination.     

The German infrared laboratory (girl) — a progress report

The liquid helium cooled 50 cm-IR-telescope is equipped with a 4-band-camera, a photopolarimeter, a grating spectrometer and a Michelson interferometer. These focal plane instruments allow measurements with high spectral resolution, high sensitivity and diffraction limited spatial resolution in the wavelength region 2.5 … 200 μm. - The “thermal model” phase of the project was successfully completed in 1983. This phase included the development and construction of a full size cryostat, which was thoroughly tested by an experiment simulator. Prototypes of all focal plane instruments have been developed and severral have already been tested under the expected flight conditions. - At present the “flight model” phase to be entered in 1984 is being prepared. The first Spacelab flight of the reusable IR observatory is planned for 1988. It will include measurements in astrophysics, atmospheric science and helium II physics.     

The Influence of Landmarks and Pre-exposure to a Structural Map During the Process of Spatial Knowledge Acquisition: A Study with Children and Adults in a Virtual Environment

ABSTRACT

This study investigated the effects of featural information (landmarks) and geometric information (pre-exposure to a structural map) and their possible interaction during the process of spatial knowledge acquisition of 8- and 11-year-old children and adults in a virtual environment. The study confirmed the well-known result of a developmental achievement in spatial cognition from childhood to adulthood. Although landmarks and the pre-exposure to a structural map did not affect the time to learn a specific route, they influenced the use of behavior in spatial learning and eased the acquisition of spatial knowledge measured by a route reversal and map-drawing tasks. Children and adults are able to integrate featural and geometric information in the spatial knowledge acquisition process in an environmental space, but their integration depends on the spatial processing stages that are investigated. Moreover, it was successfully demonstrated that the use of desktop virtual environments seems to be appropriate to investigate the development of spatial cognition.     

The Elusive Stationary Geoid

We discuss the various problems occurring when trying to fix a geoid or geopotential model using sea level observations sampled during a limited time span from a bounded geographical domain. Such problems are on the one hand aliasing and spectral leakage, and on the other, the non-conservation of matter over only part of the world ocean. In the light of these issues we discuss whether it is sensible to include in a definition of the global geoid the radially symmetric part of either the mean sea level field itself, or its linear or nonlinear time dependence, arriving at a negative conclusion. This revised version was published online in August 2006 with corrections to the Cover Date.     

Pair creation in double layers

Pair creation in relativistic double layers in shown to have consequences for the charge density in the double layer and the current flowing through it.     

Relationships of a growing magnetic flux region to flares

Some sites for solar flares are known to develop where new magnetic flux emerges and becomes abutted against opposite polarity pre-existing magnetic flux (review by Galzauskas/1/). We have identified and analyzed the evolution of such flare sites at the boundaries of a major new and growing magnetic flux region within a complex of active regions, Hale No. 16918. This analysis was done as a part of a continuing study of the circumstances associated with flares in Hale Region 16918, which was designated as an FBS target during the interval 18 – 23 June 1980. We studied the initiation and development of both major and minor flares in Hα images in relation to the identified potential flare sites at the boundaries of the growing flux region and to the general development of the new flux. This study lead to our recognition of a spectrum of possible relationships of growing flux regions to flares as follows: (1) intimate interaction with adjacent old flux — flare sites centered at new/old flux boundary, (2) forced or “intimidated” interaction in which new flux pushes old field having lower flux density towards a neighboring old polarity inversion line where a flare then takes place, (3) “influential” interaction — magnetic lines of force over an old polarity inversion line, typically containing a filament, reconnect to the new emerging flux; a flare occurs with erupting filament when the magnetic field overlying the filament becomes too weak to prevent its eruption, (4) inconsequential interaction — new flux region is too small or has wrong orientation for creating flare conditions, (5) incidental — flare occurs without any significant relationship to new flux regions.