Biomarker and stable isotope characterization of coastal pond-derived organic matter, McMurdo Dry Valleys, Antarctica

Small coastal ponds that contain photosynthetic microbial mat communities represent an extreme environment where a potentially significant source of labile organic carbon can be found within the McMurdo Dry Valleys, Antarctica. To distinguish coastal pond-derived organic matter from other sources of organic matter in the Dry Valleys, bulk organic carbon, nitrogen, and sulfur isotope signatures and phospholipid fatty acid (PLFA) profiles of benthic microbial mats located at two sites--Hjorth Hill coast and Garwood Valley--were investigated. The average isotope values at Hjorth Hill coast and Garwood Valley are, respectively, -10.9 per thousand and -10.2 per thousand for delta(13) C, 3.7 per thousand and -1.3 per thousand for delta(15)N, and 8.1 per thousand and 16.7 per thousand for delta(34)S. Microbial mats from all ponds are dominated by monounsaturated PLFAs (indicative of Gram-negative bacteria) and polyunsaturated PLFAs (indicative of microeukaryotes). Biomarkers specific to aerobic prokaryotes, eukaryotes, and photoautotrophic microeukaryotes, as well as sulfur-reducing bacteria, are present in all samples. Benthic mats at Garwood Valley are thicker and more laminated, have a higher biomass, and have a greater carbon and nitrogen content, which suggests greater productivity than mats at Hjorth Hill coast. Greater productivity is supported, as well, by higher dissolved oxygen contents likely derived from heightened photosynthetic productivity. More productivity at Garwood Valley likely results from a larger influx of terrestrial surface waters together with a concomitant nutrient loading.     

Ultrastructural study of iron oxide precipitates: implications for the search for biosignatures in the Meridiani hematite concretions, Mars

Two terrestrial environments that have been proposed as analogs for the iron oxide precipitation in the Meridiani Planum region of Mars include the Rio Tinto precipitates and southern Utah marble concretions. Samples of two typical Utah iron oxide concretions and iron oxide precipitates in contact with biofilms from Rio Tinto have been studied to determine whether evidence could be found for biomediation in the precipitation process and to identify likely locations for fossil microorganisms. Scanning electron microscopy, energy dispersive X-ray, and gas chromatography-mass spectrometry (GC-MS) were used to search for biosignatures in the Utah marbles. The precipitation of iron oxides resembles known biosignatures, though organic compounds could not be confirmed with GC-MS analysis. In contrast, textural variations induced by biological activity are abundant in the modern Rio Tinto samples. Although no compelling evidence of direct or indirect biomediation was found in the Utah marbles, the ultrastructure of the iron oxide cement in the concretion suggests an inward growth during concretion precipitation from an initially spherical redox front. No indication for growth from a physical nucleus was found.     

Influence of Body Waves,Instrumentation Resonances,and Prior Assumptions on Rayleigh Wave Ellipticity Inversion for Shallow Structure at the InSight Landing Site

Based on an updated model of the regolith’s elastic properties, we simulate the ambient vibrations background wavefield recorded by InSight’s Seismic Experiment for Interior Structure (SEIS) on Mars to characterise the influence of the regolith and invert SEIS data for shallow subsurface structure. By approximately scaling the synthetics based on seismic signals of a terrestrial dust devil, we find that the high-frequency atmospheric background wavefield should be above the self-noise of SEIS’s SP sensors, even if the signals are not produced within 100–200 m of the station. We compare horizontal-to-vertical spectral ratios and Rayleigh wave ellipticity curves for a surface-wave based simulation on the one hand with synthetics explicitly considering body waves on the other hand and do not find any striking differences. Inverting the data, we find that the results are insensitive to assumptions on density. By contrast, assumptions on the velocity range in the upper-most layer have a strong influence on the results also at larger depth. Wrong assumptions can lead to results far from the true model in this case. Additional information on the general shape of the curve, i.e. single or dual peak, could help to mitigate this effect, even if it cannot directly be included into the inversion. We find that the ellipticity curves can provide stronger constraints on the minimum thickness and velocity of the second layer of the model than on the maximum values. We also consider the effect of instrumentation resonances caused by the lander flexible modes, solar panels, and the SEIS levelling system. Both the levelling system resonances and the lander flexible modes occur at significantly higher frequencies than the expected structural response, i.e. above 35 Hz and 20 Hz, respectively. While the lander and solar panel resonances might be too weak in amplitude to be recorded by SEIS, the levelling system resonances will show up clearly in horizontal spectra, the H/V and ellipticity curves. They are not removed by trying to extract only Rayleigh-wave dominated parts of the data. However, they can be distinguished from any subsurface response by their exceptionally low damping ratios of 1% or less as determined by random decrement analysis. The same applies to lander-generated signals observed in actual data from a Moon analogue experiment, so we expect this analysis will be useful in identifying instrumentation resonances in SEIS data.     

The problem of indirect sounding of high clouds

Remote sounding of high cloud top temperatures by passive methods is a difficult venture due to the semitransparency of the clouds. Window channel measurements often overestimate the cloud top temperature. In this study it is experimentally shown and supported by theoretical considerations that water vapor channels, which are originally intended to sense the high tropospheric water vapor content, are more suitable than window channels. In addition, it is shown that measurements in the H₂O rotational band are superior to 6.3 μm channels due to higher intensity of the outgoing radiation and less contribution by scattering by cloud particles.     

Proton Events and X-ray Flares in the Last Three Solar Cycles

A database joining the available information about proton enhancements near the Earth and their possible solar sources is organized on the basis of proton measurements of the GOES and IMP-8 satellites, the data of neutron monitors, and GOES X-ray measurements. One thousand one hundred and forty-four proton events with energy > 10 MeV have been selected in the period from 1975 to 2003. More than a half of these events can be reliably related to X-ray solar flares. A statistical analysis shows the probability of observing solar protons near the Earth and their maximum flux value to be strongly dependent on the importance of a flare and its heliolongitude. Proton events are recorded after all suitably located (western) flares with X-ray importance > X5. The heliolongitude of a flare predetermines the character of the time profile of proton events in many respects. The relationship of proton events with the other characteristics of flares is established. The flares associated with proton enhancements are characterized by longer duration, slower rise to the X-ray maximum, smaller temperature, and larger length of the X-ray loops.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 171–185.Original Russian Text Copyright © 2005 by Belov, Garcia, Kurt, Mavromichalaki.     

Studying the positioning accuracy for dynamic (moving) objects with the use of multifrequency oblique-incidence sounding of ionospheric radio channels by chirp signals

The paper presents the methods and algorithms for positioning the dynamic (moving) objects using the oblique-incidence ionospheric sounding by chirp signals. Full-scale experiments have been performed to determine a distance to an object and its location.     

Hard X-Ray/Soft Gamma-Ray Experiments and Missions: Overview and Prospects

Starting from 1960s, a great number of missions and experiments have been performed for the study of the high-energy sky. This review gives a wide vision of the most important space missions and balloon experiments that have operated in the 10–600 keV band, a crucial window for the study of the most energetic and violent phenomena in the Universe. Thus it is important to take the stock of the achievements to better establish what we have still to do with future missions in order to progress in this field, to establish which are the technologies required to solve the still open issues and to extend our knowledge of the Universe.     

The Noise Model of the SEIS Seismometer of the InSight Mission to Mars

The SEIS (Seismic Experiment for Interior Structures) instrument on board the InSight mission to Mars is the critical instrument for determining the interior structure of Mars, the current level of tectonic activity and the meteorite flux. Meeting the performance requirements of the SEIS instrument is vital to successfully achieve these mission objectives. The InSight noise model is a key tool for the InSight mission and SEIS instrument requirement setup. It will also be used for future operation planning. This paper presents the analyses made to build a model of the Martian seismic noise as measured by the SEIS seismometer, around the seismic bandwidth of the instrument (from 0.01 Hz to 1 Hz). It includes the instrument self-noise, but also the environment parameters that impact the measurements. We present the general approach for the model determination, the environment assumptions, and we analyze the major and minor contributors to the noise model.     

Interstellar Mapping and Acceleration Probe (IMAP): A New NASA Mission

The Interstellar Mapping and Acceleration Probe (IMAP) is a revolutionary mission that simultaneously investigates two of the most important overarching issues in Heliophysics today: the acceleration of energetic particles and interaction of the solar wind with the local interstellar medium. While seemingly disparate, these are intimately coupled because particles accelerated in the inner heliosphere play critical roles in the outer heliospheric interaction. Selected by NASA in 2018, IMAP is planned to launch in 2024. The IMAP spacecraft is a simple sun-pointed spinner in orbit about the Sun-Earth L1 point. IMAP’s ten instruments provide a complete and synergistic set of observations to simultaneously dissect the particle injection and acceleration processes at 1 AU while remotely probing the global heliospheric interaction and its response to particle populations generated by these processes. In situ at 1 AU, IMAP provides detailed observations of solar wind electrons and ions; suprathermal, pickup, and energetic ions; and the interplanetary magnetic field. For the outer heliosphere interaction, IMAP provides advanced global observations of the remote plasma and energetic ions over a broad energy range via energetic neutral atom imaging, and precise observations of interstellar neutral atoms penetrating the heliosphere. Complementary observations of interstellar dust and the ultraviolet glow of interstellar neutrals further deepen the physical understanding from IMAP. IMAP also continuously broadcasts vital real-time space weather observations. Finally, IMAP engages the broader Heliophysics community through a variety of innovative opportunities. This paper summarizes the IMAP mission at the start of Phase A development.