电子干扰对低可观测飞行器飞行路径规划的影响

为了提高巡航导弹的低空突防能力,在分析电子干扰对雷达网威胁区域的影响后认为:在多重干扰条件下,雷达探测空间会顺着干扰方向产生内凹和偏移,因此,建立了新的雷达探测空间模型.采用空间对象间拓扑关系推理方法建立了飞行器飞行路径规划目标函数中雷达威胁指数模型,然后改进了飞行器飞行路径规划模型,并在此基础上进行了巡航导弹飞行路径规划的软件仿真.仿真结果表明:考虑电子干扰对雷达威胁区域的影响情况下规划的飞行路径能够回避雷达威胁,有效提高飞行器低空突防能力.     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

基于晶体塑性的涡轮盘短裂纹扩展模拟方法

针对低周疲劳载荷下发动机涡轮盘早期短裂纹扩展行为,提出适用于工程结构的耦合晶体塑性（CP）理论和扩展有限元方法（XFEM）的多晶短裂纹模拟方法。该方法采用晶体内总累积分解切应变作为裂纹扩展判据并使裂纹沿最活跃滑移系对应的滑移平面传播。框架采用子模型技术/分区域网格细化以及宏-介观本构结合的方法解决真实工程结构和微观模型尺度不匹配的问题,在可接受的计算代价下预测了涡轮盘危险截面处的短裂纹扩展路径及速率。结果表明该结构内早期裂纹生长路径及速率受到晶体取向的影响而出现较大分散性,同时验证了基于CP-XFEM的框架在预测工程结构短裂纹扩展寿命及分散性上的可行性。      

Experimental study of hydrogen-rich/oxygen-rich gas-gas injectors

Five types of coaxial injectors were investigated experimentally using hot hydrogen-rich gas and oxygen-rich gas, which were respectively provided by a GH2/GO2 hydrogen-rich perburner and a GH2/GO2 oxygen-rich preburner. The injectors were the shear coaxial injector, the oxidizer post expansion coaxial injector, the fuel impinging coaxial injector, the central body coaxial injector, and the shear tri-coaxial injector. The characteristic velocity efficiency and the combustor＇s wall temperatures were obtained for different design parameters through the experiments. It can be con- cluded that angles of the oxidizer post expansion and the fuel impinging have little influence on the combustion performance and the wall temperatures. The contact area between fuel and oxidizer and the mass flow rate have significant impacts on the combustion performance. The shear tri-coaxial injector has the best combustion performance but also the highest wall temperatures among the five types of injectors.     

一种电子天平测量结果的数据处理优化方法

电子天平具有数字化特性和较高的分辨力。本文通过与质量差值法的对比,提出一种新的电子天平测量结果的处理方法——比例系数法,并通过理论和实践验证了此方法的可行性。     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

叶轮转速对抛丸成形的影响

试验研究了叶轮转速对抛丸成形的影响，结果表明，横向抛丸变形是叶轮转速的幂函数。     

多喷口环量控制翼型流动的研究

提出了多喷口环量控制翼型的想法，并进行了数值研究。结果表明，多喷口环量控制方法可以在中、小Ｃμ吹气时提高翼型的升力和减小能耗，并能改善环量控制翼型在较高来流马赫数下的气动性能，避免“压缩性失速”。