Estimation techniques for GMSK using linear detectors in satellite communications

This paper describes data-aided signal level and noise variance estimators for Gaussian minimum shift keying (GMSK) when the observations are limited to the output of a filter matched to the first pulse-amplitude modulation (PAM) pulse in the equivalent PAM representation. The estimators are based on the maximum likelihood (ML) principle and assume burst-mode transmission with known timing and a block of L₀ known bits. While it is well known that ML estimators are asymptotically unbiased and efficient, the analysis quantifies the rate at which the estimators approach these asymptotic properties. It is shown that the carrier phase, amplitude, and noise variance estimators are unbiased and can achieve their corresponding Cramer-Rao bounds with modest combinations of signal-to-noise ratio and observation length. The estimates are used to estimate the signal-to-noise ratio. It is shown that the mean squared error performance of the ratio increases with signal-to-noise ratio while the mean squared error performance of the ratio in decibels decreases with signal-to-noise ratio. Simulation results are provided to confirm the accuracy of the analytic results.     

Soft X-ray characteristics of white dwarfs observed by EXOSAT

EXOSAT has observed 19 hot white dwarfs with alleged strong soft X-ray emission. Positive detection of a large fraction of this sample was obtained, among these practically all hot DA dwarfs. High-resolution spectral data, acquired with the 500 1/mm grating spectrometer, indicates no traces of He in the atmosphere of HZ43, i.e. n(He)/n(H) ? 10^?5 at a photospheric temperature of 60000 K (log g = 8). In contrast, the hot DA1 dwarf Feige 24 shows the presence of an appreciable He-abundance (n(He)/n(H) ? 10^?3); however no simple homogeneously mixed H/He atmosphere can explain the observed spectral shape.     

Dynamics of a spacecraft and normalization around Lagrangian points in the Neptune–Triton system

The problem of a spacecraft orbiting the Neptune–Triton system is presented. The new ingredients in this restricted three body problem are the Neptune oblateness and the high inclined and retrograde motion of Triton. First we present some interesting simulations showing the role played by the oblateness on a Neptune’s satellite, disturbed by Triton. We also give an extensive numerical exploration in the case when the spacecraft orbits Triton, considering Sun, Neptune and its planetary oblateness as disturbers. In the plane a × I (a = semi-major axis, I = inclination), we give a plot of the stable regions where the massless body can survive for thousand of years. Retrograde and direct orbits were considered and as usual, the region of stability is much more significant for the case of direct orbit of the spacecraft (Triton’s orbit is retrograde). Next we explore the dynamics in a vicinity of the Lagrangian points. The Birkhoff normalization is constructed around L₂, followed by its reduction to the center manifold. In this reduced dynamics, a convenient Poincaré section shows the interplay of the Lyapunov and halo periodic orbits, Lissajous and quasi-halo tori as well as the stable and unstable manifolds of the planar Lyapunov orbit. To show the effect of the oblateness, the planar Lyapunov family emanating from the Lagrangian points and three-dimensional halo orbits are obtained by the numerical continuation method.     

Solar EUV and UV Emission Line Observations Above a Polar Coronal Hole

The roll manoeuvre of SOHO on September 3, 1997 provided the opportunity to study the northern coronal hole with SUMER slits in east-west orientation, so that polar plumes and inter-plume lanes could be observed simultaneously. A preliminary analysis of the observations shows that lines emitted by ions with the lowest formation temperatures (with the exceptions of Ne⁷⁺ and Ar⁷⁺) have the largest ratios of plume to lane radiances at heights between 35 000 km and 70 000 km above the photosphere. All lines have narrower widths inside plumes than outside. Electron densities have been deduced in plumes and lanes from Si VIII and Mg VIII line radiance ratios. The Mg IX pair was used to determine the corresponding electron temperatures. Neon (with a high first-ionization potential) is found to be less abundant relative to magnesium (with low FIP) in a plume compared to an inter-plume lane, but the variation is smaller than previously determined Ne/Mg abundance ratios in a plume relative to the photosphere. This revised version was published online in June 2006 with corrections to the Cover Date.     

Interaction of Titan's atmosphere with Saturn's magnetosphere

The Voyager 1 measurements made during the Titan flyby reveal that Saturn's rotating magnetospheric plasma interacts directly with Titan's neutral atmosphere and ionosphere. This results from the lack of an intrinsic magnetic field at Titan. The interaction induces a magnetosphere which deflects the flowing plasma around Titan and forms a plasma wake downstream. Within the tail of the induced magnetosphere, ions of ionospheric origin flow away from Titan. Just outside Titan's magnetosphere, a substantial ion-exosphere forms from an extensive hydrogen-nitrogen exosphere. The exospheric ions are picked up and carried downstream into the wake by the plasma flowing around Titan. Mass loading produced by the addition of exospheric ions slows the wake plasma down considerably in the vicinity of the magnetopause.     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.     

Investigation of resonant modes and frequencies of plate vibrations as applied to turbomachine blades

The results of experimental and numerical investigations of resonant vibration frequencies and modes for rectangular cantilever plates of constant thickness are presented. The investigations are carried out using the methods of interference holography and finite elements, and the results may serve as basic references in determining resonant frequencies and modes of compressor and turbine blade vibrations.     

A method of airfoil shape completing

An iteration method for airfoil shape completing using the pressure coefficient distribution specified on its sought part is proposed. The incompressible flow viscosity is taken into account by the boundary layer model, the iteration process is constructed with the use of G.Yu. Stepanov’s idea. The solution algorithm is compiled and a set of numerical calculations is carried out. It is shown that the method proposed offers advantages over the well-known numerical-analytical scheme of solving mixed inverse boundary-value problems of aerohydrodynamics in the case of viscous incompressible fluid.     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

XMM-Newton survey of non-thermal shell candidates: Preliminary results on DA 530

The investigation of the general properties of non-thermal (NT) X-ray shell supernova remnants (SNRs), of which SN 1006 is the prototype, is important to understand how electrons are accelerated in SNR shocks and what is the origin of cosmic rays. Using the XMM-Newton satellite, we are carrying on a survey of putative non-thermal SNR candidates previously unknown or little studied in the X-ray band, in order to investigate the different manifestations of NT emission in SNR shells. The SNRs we have selected are likely to expand in a low density medium, and therefore to have a low thermal X-ray emission, that usually outshines the non-thermal one. We report here preliminary results obtained on the SNR shell DA 530.