星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

计算机辅助机械设计的实践与研究

本文结合作者编制计算机辅助机械设计课程设计应用软件的经验，介绍了机械设计中计算机应用程序的构造、流程和数据处理方法，这些方法适用于计算量大、数据量多的设计过程。     

飞行控制软件可靠性设计探讨

控制系统飞行软件 (飞行控制软件 )是关系到弹箭飞行成败的关键部分 ,本文从一些实例出发对如何提高飞行控制软件设计的可靠性做了探讨。     

二次抛物线型面喷管参数的优化选择

二次抛物线型面是火箭发动机喷管较常用的一种型面，对其参数进行优化选择是必要的，在喷管型面长度和出口扩张半角确定的条件下，优化方法是把比冲作为目标函数，利用一维等熵流的气动力公式，二次抛物线型面的几何关系和计算机求极大值方法，确定达到比冲最佳值的设计变量一喷管初扩张角和出口马赫数。     

高分辨率星载聚束式SAR改进的ECS成像算法

提出一种适用于高星载聚束式合成孔径雷达（SAR）的改进Extended Chirp Scaling（ECS）算法。基于斜视距离等效模型，推导出改进的ECS算法，给出改进的方位Scaling因了以及算法的实现步骤。在斜视情况下改进的方法Scaling因子可以减小算法所需要的方位时间展宽，提高方位处理效率。为解决高分辨率星载聚束式SAR脉冲重复频率（PRF）过高等问题，在算法中结合了子孔径处理，并分析了采用子孔径处理的必要性及其实现方法。最后，通过计算机仿真，验证了算法的有效性。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

增加纵向隔板解决推进剂晃动稳定问题

某型三级运载火箭为短粗结构，在研制过程中曾发生第三级推进剂晃动不稳定问题。分析认为，这是运载火箭的则体结构与推进剂晃动强烈耦合所致。为解决不稳定问题，提出在推进剂箱中增加纵向隔板，分别以４５°，９０°分隔。分析和试验表明，这种方法能提高推进剂的晃动频率，减小晃动质量，但结构复杂。主题词     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。