低轨卫星面阵凝视成像技术研究

文章介绍了面阵凝视成像的工作原理及特点，阐述了低轨卫星对地观测凝视成像面临的像移问题及其解决措施，对像移补偿装置与二维指向机构的结合做了初步探讨。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

计算机辅助机械设计的实践与研究

本文结合作者编制计算机辅助机械设计课程设计应用软件的经验，介绍了机械设计中计算机应用程序的构造、流程和数据处理方法，这些方法适用于计算量大、数据量多的设计过程。     

飞行控制软件可靠性设计探讨

控制系统飞行软件 (飞行控制软件 )是关系到弹箭飞行成败的关键部分 ,本文从一些实例出发对如何提高飞行控制软件设计的可靠性做了探讨。     

有源磁悬浮动态特性的测试与辨识

惯性仪表有源磁悬浮的动态特性实质上反映着其浮子组件五个自由度的动力学规律。针对时分式有源磁悬浮动态特性测试在工程实现上的具体困难， 基于多输入多输出（ Ｍ Ｉ Ｍ Ｏ） 系统的测试和辨识原理， 采用时分信号激励和近似的时序同步数据采集方法， 进行了磁悬浮各回路的时域测试和辨识， 结果表明， 开环状态下的浮子运动有一定交叉耦合关系， 在有源磁悬浮设计和调试中应当加以考虑。同时分析了辨识的可行性和可信度。     

二次抛物线型面喷管参数的优化选择

二次抛物线型面是火箭发动机喷管较常用的一种型面，对其参数进行优化选择是必要的，在喷管型面长度和出口扩张半角确定的条件下，优化方法是把比冲作为目标函数，利用一维等熵流的气动力公式，二次抛物线型面的几何关系和计算机求极大值方法，确定达到比冲最佳值的设计变量一喷管初扩张角和出口马赫数。     

组网数据处理探讨

讨论了测向定位中双站交会定位及定位误差分析、三站交会定位、多站交会定位若干问题，首次尝试将最小二乘法和递推最小二乘法用于多站测向定位，减少了大量的矩阵求逆，数据利用效率高，可以提高测向定位的精度和简化运算。特别是在存在多径效应的情况下，有利于发现和去除野值。在测向站组网数据的处理和应用上有较强的实用性和推广价值。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.