航空发动机转子系统建模方法和振动特性分析

针对现代航空涡扇发动机转子系统的结构和力学特征,运用有限元法对其低压转子进行了有限元建模方法和动力特性研究.分别采用二维梁单元和三维实体单元建立转子系统的有限元模型,对其动力特性计算结果进行比较分析,在此基础上,提出了等效圆盘法进行有限元建模的等效原则.等效圆盘法将转子系统的叶片等效为刚性圆环,既能保留转子系统的结构和力学特征,又能有效地控制模型规模,将周期问题转化为轴对称问题,便于有限元程序的求解计算.计算结果表明,该方法是一种适用工程实际的有限元建模方法.     

A robust solution for hesitate phenomenon in pick up process of aerospace electromagnetic relay

As for aerospace electromagnetic relay (AEMR) which is of small batches and having difficulty in automatic production, the uncertainty phenomenon is remarkable due to excessive manual work involved in the assembly and adjustment processes. This kind of uncertainty may increase the coil voltage difference (CVD) caused by hesitate phenomenon in the pick up process of AEMR. Taking a certain type of AEMR for example, the CVD problem in the actual producing process has been studied in this paper. The primary cause of this issue, two-steps of armature motion (namely hesitate phenomenon) in the pick up process, has been found by analyzing the matching characteristics of electromagnetic and mechanical torques of AEMR. Through the optimization of the matching characteristics, the two-steps of armature motion problem is solved by robust design of the return reed which is a key part of AEMR. The validity of this research has been proved by the comparison of characteristics of AMER before and after the optimization.     

座舱排气供某设备通风冷却技术研究

基于某教练机某设备的通风冷却要求,开展利用座舱排气对某设备进行通风冷却的技术研究.通过对该型飞机座舱排气供某设备通风冷却系统的地面模拟试验研究分析,探讨座舱排气冷却电子设备技术在环控系统中的应用问题.     

浅析高校教材的循环利用

教材循环利用是一项利国利民的举措,本文以本校图书馆为例详细阐述教材循环利用是贴合当今、利于后代的行动。通过设计我校教材循环利用调查方案,分析教材循环利用中存在的问题,通过教材回收管理、有针对性地给出教材循环利用解决方案。     

Tribological evaluation of surface modified H13 tool steel in warm forming of Ti–6Al–4V titanium alloy sheet

The H13 hot-working tool steel is widely used as die material in the warm forming of Ti–6Al–4V titanium alloy sheet. However, under the heating condition, severe friction and lubricating conditions between the H13 tools and Ti–6Al–4V titanium alloy sheet would cause difficulty in guaranteeing forming quality. Surface modification may be used to control the level of friction force, reduce the friction wear and extend the service life of dies. In this paper, four surface modification methods(chromium plating, TiAlN coating, surface polishing and nitriding treatment)were applied to the H13 surfaces. Taking the coefficient of friction(CoF) and the wear degree as evaluation indicators, the high-temperature tribological behavior of the surface modified H13 steel was experimentally investigated under different tribological conditions. The results of this study indicate that the tribological properties of the TiAlN coating under dry friction condition are better than the others for a wide range of temperature(from room temperature to 500 C), while there is little difference of tribological properties between different surface modifications under graphite lubricated condition, and the variation law of CoF with temperature under graphite lubricated is opposite to that under the dry friction.     

A study on turbulence transportation and modification of Spalart–Allmaras model for shock-wave/turbulent boundary layer interaction flow

It is of great significance to improve the accuracy of turbulence models in shock-wave/ boundary layer interaction flow. The relationship between the pressure gradient, as well as the shear layer, and the development of turbulent kinetic energy in impinging shock-wave/turbulent boundary layer interaction flow at Mach 2.25 is analyzed based on the data of direct numerical simulation(DNS). It is found that the turbulent kinetic energy is amplified by strong shear in the separation zone and the adverse pressure gradient near the separation point. The pressure gradient was non-dimensionalised with local density, velocity, and viscosity. Spalart–Allmaras(S–A) model is modified by introducing the non-dimensional pressure gradient into the production term of the eddy viscosity transportation equation. Simulation results show that the production and dissipation of eddy viscosity are strongly enhanced by the modification of S–A model. Compared with DNS and experimental data, the wall pressure and the wall skin friction coefficient as well as the velocity profile of the modified S–A model are obviously improved. Thus it can be concluded that the modification of S–A model with the pressure gradient can improve the predictive accuracy for simulating the shock-wave/turbulent boundary layer interaction.     

机载嵌入式软件可靠性设计研究

机载航电系统的可靠性问题越来越受到关注,软件可靠性设计要抓住两个方面,软件开发过程和软件开发方法。本文根据机载嵌入式系统软件的特点,讨论了软件开发过程在可靠性方面的考虑,还有在需求、设计、编码阶段使用的相关设计方法和技术。     

底盘后梁组装定位及焊接工艺改进

对某产品底盘中后梁组装、焊接工艺改进进行了总结分析,该工艺可有效提高后梁组装的安装精度,有效控制焊接变形,保证各安装尺寸和形位公差精度要求,从而避免举升油缸在带动举升臂举升及回抱过程中承受侧向力,通过该工艺改进的应用,大大提高了产品质量和可靠性,同时降低工人劳动强度,提高工作效率。     

固体发动机φ200mm带喷管整体缠绕壳体的研制

研制了３台φ２００ｍｍ带喷管不等开口整体缠绕壳休交验了带喷管体整体结构强度，所测壳体的实际爆破压强为１１．６－１３．０ＭＰａ，是设计爆破压强的１．４－１．６倍。