Diagnosing the Neutral Interstellar Gas Flow at 1 AU with IBEX-Lo

Every year in fall and spring the Interstellar Boundary Explorer (IBEX) will observe directly the interstellar gas flow at 1 AU over periods of several months. The IBEX-Lo sensor employs a powerful triple time-of-flight mass spectrometer. It can distinguish and image the O and He flow distributions in the northern fall and spring, making use of sensor viewing perpendicular to the Sun-pointing spin axis. To effectively image the narrow flow distributions IBEX-Lo has a high angular resolution quadrant in its collimator. This quadrant is employed selectively for the interstellar gas flow viewing in the spring by electrostatically shutting off the remainder of the aperture. The operational scenarios, the expected data, and the necessary modeling to extract the interstellar parameters and the conditions in the heliospheric boundary are described. The combination of two key interstellar species will facilitate a direct comparison of the pristine interstellar flow, represented by He, which has not been altered in the heliospheric boundary region, with a flow that is processed in the outer heliosheath, represented by O. The O flow distribution consists of a depleted pristine component and decelerated and heated neutrals. Extracting the latter so-called secondary component of interstellar neutrals will provide quantitative constraints for several important parameters of the heliosheath interaction in current global heliospheric models. Finding the fraction and width of the secondary component yields an independent value for the global filtration factor of species, such as O and H. Thus far filtration can only be inferred, barring observations in the local interstellar cloud proper. The direction of the secondary component will provide independent information on the interstellar magnetic field strength and orientation, which has been inferred from SOHO SWAN Ly-α backscattering observations and the two Voyager crossings of the termination shock.     

Anthropogenic trigger of substorms and energetic particles precipitations

The high-frequency (HF) emission in near-Earth space from various powerful transmitters (radio communications, radars, broadcasting, universal time and navigation stations, etc.) form an integral part of the modern world that it cannot do without. In particular, special-purpose research facilities equipped with powerful HF transmitters are used successfully for plasma experiments and local modification of the ionosphere. In this work, we are using the results of a complex space-ground experiment to show that exposure of the subauroral region to HF emission can not only cause local changes in the ionosphere, but can also trigger processes in the magnetosphere–ionosphere system that result in intensive substorm activity (precipitations of high-energy particles, aurorae, significant variations in the ionospheric parameters and, as a consequence, in radio propagation conditions).     

Spin parameters of Low Earth Orbiting satellites Larets and Stella determined from Satellite Laser Ranging data

Satellite Laser Ranging (SLR) measurements contain information about the spin parameters of the fully passive, geodetic satellites. In this paper we spectrally analyze the SLR data of 5 geodetic satellites placed on the Low Earth Orbits: GFZ-1, WESTPAC, Larets, Starlette, Stella, and successfully retrieve the frequency signal from Larets and Stella only. The obtained signals indicate an exponential increase of the spin period of Larets: T = 0.860499·exp(0.0197066·D) [s], and Stella: T = 13.5582·exp(0.00431232·D) [s], where D is in days since launch. The initial spin periods calculated from the first month of the SLR observations are: Larets: T_initial = 0.8239 s, Stella: T_initial = 13.2048 s. Analysis of the apparent effects indicates the counter-clockwise spin direction of the satellites. The twice more heavy Stella lost its rotational energy more than four times slower than Larets. Fitting the spin model to the observed spin trends allows determination of the spin axis orientation evolution for Larets and Stella before their rotational period becomes equal to the orbital period.     

Difficulties in the study of cosmic radio noise absorption at 30 MHz using riometer at low latitude station,Kolhapur (Lat-16.8°N,Long-74.25°E)

A dual dipole antenna has been installed at low latitude station Kolhapur (Geographic 16.8°N, 74.25°E), Maharashtra, India for the study of cosmic radio noise absorption using Solid State Riometer (which operates at 30 MHz) during pre phase of 24th solar maxima. The aim for this type of study over Kolhapur was to know the response of lower (D region) ionosphere over low latitude by cosmic radio noise absorption using riometer technique during quite period as well as sudden ionospheric disturbances (SID). The observations are being taken for 3 years. Two different sites (∼40 km away from each other) were used for the installation of riometer equipment assuming minimum local noise. It is found that solar noise to cosmic radio noise hence resulting in signal saturation. The night time signal is relatively free of interference but sometimes local noise is responsible for spike-like signatures. Hence it is concluded that Kolhapur (a low latitude station) is not suitable for the study of cosmic radio noise absorption on 30 MHz with riometer and dual dipole antenna. Proper choice for operating frequency of riometer and antenna gain is suggested for low latitude use of this technique for ionospheric deviative and nondeviative absorption studies.     

Time-dependent stresses in a beam under a load moving along its surface

We studied the time-dependent processes in a beam under the action of the load that is normal to its surface and moves with the constant velocity. It was found that the maximum stresses are realized in the fixed beam section at different moments of time depending on the travel speed of external load. With increasing the load movement velocity, the maximum stresses in the region of beam clamping are reduced, while the levels of local normal and shear stresses in the limits of its action increase more significantly approaching to the limiting values in accordance to the known experimental fact that at high rates the beam failure is caused by shear stresses.     

Satellite Angular Motion under the Action of SDOT Magnetic One Axis Sun Acquisition Algorithm

Cosmic Research - Numerical simulation of satellite stabilization towards the Sun for the batteries charge is performed. The magnetic attitude control system implements the Sdot algorithm. It...     

Variations of geomagnetic cutoff rigidity in the southern hemisphere close to 70°W (South-Atlantic Anomaly and Antarctic zones) in the period 1975–2010

We report the existence of rapid variations in (effective) geomagnetic cutoff rigidity (Rc) between the equatorial and Antarctic zones adjacent to the Andes Mountains, revealed by the variation rate of geomagnetic cutoff rigidity (VRc) in the period 1975–2010. Our analysis is based on empirical records and theoretical models of the variations in cosmic rays and on the structure of geomagnetic fields. These have given us a different view of variations in Rc in time and space along the 70°W meridian, where secular variations in the geomagnetic field are strongly influenced by the proximity of the South Atlantic Magnetic Anomaly (SAMA), one of the most important characteristics of the terrestrial magnetic field that affects our planet, close from the equator to the 50°S parallel and from South America to South Africa. The VRc presents rapid changes in mid-latitudes where SAMA exerts its influence despite the existence of smooth changes in the geomagnetic field. This shows that these changes occur mainly in the spatial configuration, rather than in the temporal evolution of Rc. The analysis was performed using measurements from the Chilean Network of Cosmic Rays and Geomagnetism Observatories, equipped with BF-3 and latest generation He-3 neutron monitors, Fluxgate magnetometers, geomagnetic reference field (IGRF) and Tsyganenko 2001 model (just for completeness).     

Passive localization of moving emitters using out-of-planemultipath

The purpose of this work is to establish how a moving emitter, such as a jammer, can be localized by a passive receiver through the use of out-of-plane multipath signals reflected by the terrain. This is a novel localization technique that assumes no a priori knowledge of the localization of the multipath sources. The emitter parameters of range, heading, velocity, and altitude are estimated by exploiting the correlation between the direct-path signal and the delayed and Doppler modulated signals. Two basis assumptions about the scattering properties of the terrain lead to different maximum likelihood estimators (MLEs). The Cramer-Rao lower bounds (CRLB) are used to study estimator performance versus emitter velocity for each case. The proposed estimators are successfully demonstrated using field data collected at White Sands Missile Range (WSMR) during the DARPA/Navy Mountaintop program     

Clutter and jammer multipath cancellation in airborne adaptiveradar

Airborne surveillance radars must detect and localize targets in diverse interference environments consisting of ground clutter, conventional jamming, and terrain scattered jammer multipath. Multidimensional adaptive filtering techniques have been proposed to adaptively cancel this interference. However, a detailed analysis that includes the effects of multipath nonstationarity has been elusive. This work addresses the nonstationary nature of the jammer multipath and its impact on clutter cancellation and target localization. It is shown that the weight updating needed to track this interference will also modulate sidelobe signals. At the very least, this complicates the localization of targets. At the worst, it also greatly complicates the rejection of clutter. Several techniques for improving cancellation of jammer multipath and clutter are proposed, including 1) weight vector interpolation, extrapolation, and updating; 2) filter architecture, constraint, and beamspace selection; 3) prefilters; 4) 3-D STAP architectures; and 5) multidimensional sidelobe target editing