综合控制系统研究及其仿真

研究了综合火力/飞行/推进控制系统原理及其各个子系统的控制律设计方法,研究通过飞行、推进、火控等系统的综合实现自动飞行、自动攻击的原理,并利用VC 和Open GL联合开发了综合控制仿真、设计平台,结合有效的任务管理及控制律剪裁,实现了灵活的系统运行配置,将设计平台和仿真平台集为一体,并将多个系统的综合、测试、仿真在一个平台上实现。最后通过数字仿真表明,综合控制系统明显地提高了飞机综合化、自动化水平,也验证仿真平台达到了设计要求。     

舰载无人机精确着舰轨迹控制及飞行验证

舰载无人机回收是整个飞行中最困难的任务之一。在建立舰载无人机控制系统基础上,着重设计了纵向控制增稳系统和自主飞行控制系统。为保证着舰精度,引入光学导引着舰,通过试飞验证了光学引导系统的速度、精度可以满足无人机自动下滑着陆要求,其平均落地点偏差与差分GPS相当。     

某型涡扇发动机地面起动试验研究

本文基于某型涡扇发动机地面试验情况,分析讨论了地面起动这一动态过程中主要参数的变化情况及原因,并结合试验数据,利用简单三段积分法计算了某型起动机特性,为地面起动控制规律和起动机设计计算提供了一定的参考依据。     

极限编程及其在成品管理系统开发中的质量控制

本文简单介绍了一种敏捷软件开发方法——极限编程，以及质量控制的基本方法。并探讨在成品管理系统中如何运用极限编程进行软件质量控制，既保持“敏捷”的特点，又能作为一种成熟的蜂件开发过謦，提供高质量的软件产品。     

基于DSP的ARINC429总线接口设计

ARINC429总线广泛应用在军用及民用飞机上,针对现今要求较高的自动测试系统中广泛采用VXI测试总线结构,同时VXI-ARINC429接口板价格昂贵的现状,对应用在某型飞机空对地攻击系统的自动测试系统中的VXI-ARINC429接口板进行了设计研究.该接口板采用了高速DSP、高集成度的CPLD和高性能的ARINC429接口芯片,经过测试表明,该接口板性能稳定可靠,很好地满足了自动测试系统的需求.     

Energy-optimal trajectory planning for solar-powered aircraft using soft actor-critic

High-Altitude Long-Endurance(HALE) solar-powered Unmanned Aircraft Vehicles(UAVs) can utilize solar energy as power source and maintain extremely long cruise endurance,which has attracted extensive attentions from researchers. Trajectory optimization is a promising way to achieve superior flight time because of the finite solar energy absorbed in a day. In this work,a method of trajectory optimization and guidance for HALE solar-powered aircraft based on a Reinforcement Learning(RL) framework is...     

Study on dynamic stiffness of supporting structure and its influence on vibration of rotors

The dynamic response of the rotor depends on not only itself but also the dynamical characteristics of the structures that support it. In this paper, the coupling vibration characteristics of the rotor and supporting structure are studied using one simple rotor-supports model firstly, and then the dynamic stiffness of the typical supporting structure of an aero-engine is investigated in use of both numerical and experimental methods. While, one simulation strategy is developed to include dynamic...     

组合升力体动力学建模与仿真

设计了组合升力体总体布局,提出了新的组合升力体建模思路与方法,建立了完整的组合升力体飞行动力学数值仿真模型。建模时综合考虑了主要气动力部件的建模,详细讨论了旋翼／固定翼过渡飞行模式的建模方法。根据提出的建模方法进行了组合升力体的操纵响应分析,仿真结果证明了建模理论和方法的合理性和有效性。     

Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

Diamond-like carbon （DLC） films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film＇s performance were studied. The experimental results show that the film＇s surface roughness, the hardness and the Young＇s modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young＇s modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young＇s modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.