On synthesizing the informative functions of hazard at helicopter’s critical flight conditions

In this paper, we consider some typical values of motion parameters in exceptional situations when approaching to the helicopter critical flight regimes and present a technique for constructing the partial and integral informative functions of hazards at current flight regimes. Also described are the possibilities of their use for solving the problems of warning, informative crew support, and synthesizing the control algorithms to remove helicopter from the exceptional situation occurred.     

Hermes vehicle

The presence of Europe in the future developments of spatial programs, which are foreseen, for the 1990s and further, needs the availability of vehicles, modules and all related technologies adapted to operational use of low earth orbit station.The manned HERMES vehicle shall be part of the in-orbit infrastructure realized either in the European context or in cooperation between Europe and the United States.The main mission for this vehicle will be to run a shuttle with the station that means transport and change of the crews, its safe return in abort condition and cargo transport of consumable and experimental equipment.Secondary missions could be servicing on automatic platform, making autonomous scientific experiments. Lastly, the vehicle, by means of its on-board propulsion capability, could be used to accomplish in-orbit tow and assembly missions.Studies which are undertaken now about the vehicle are devoted to the aerodynamic shape (research of a compromise between aerothermic and overall fitting), the system (functional architecture, ground and flight configuration); further works dealing with technology are presently on hand in the field of thermal protection, aerodynamics, power generation with a high massic yield.     

An approach to forming the design performance of the attitude control system for small spacecraft

The elements for various types of attitude control systems used in a number of small spacecraft are considered. An approach for assessment of such system effectiveness based on design requirements for spacecraft purpose and restriction in accuracy, mass and energy is proposed.     

One-kVA, Three-Phase dc-ac Inverter with Digital Control

This paper describes a method of applying digital techniques to the control of a 1-kVA three-phase dc-ac inverter to generate a sinusoidal 400-Hz output, using high-frequency bridge-chopper techniques. The model which was constructed used predominantly off-theshelf digital microcircuits and resulted in a device with an overall efficiency of 85 percent, in a 0.52 cubic-foot package which weighed 19.5 lbs. Sinusoidal output with less than 2 percent harmonic distortion at 115 volts line to neutral was obtained with 28 volts dc input.     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

Potential Effects of Surface Temperature Variations and Disturbances and Thermal Convection on the Mars InSight HP<Superscript>3</Superscript> Heat-Flow Determination

The HP³ instrument on the InSight lander mission will measure subsurface temperatures and thermal conductivities from which heat flow in the upper few meters of the regolith at the landing site will be calculated. The parameter to be determined is steady-state conductive heat flow, but temperatures may have transient perturbations resulting from surface temperature changes and there could be a component of thermal convection associated with heat transport by vertical flow of atmospheric gases over the depth interval of measurement. The experiment is designed so that it should penetrate to a depth below which surface temperature perturbations are smaller than the required measurement precision by the time the measurements are made. However, if the measurements are delayed after landing, and/or the probe does not penetrate to the desired depth, corrections may be necessary for the transient perturbations. Thermal convection is calculated to be negligible, but these calculations are based on unknown physical properties of the Mars regolith. The effects of thermal convection should be apparent at shallow depths where transient thermal perturbations would be observed to deviate from conductive theory. These calculations were required during proposal review and their probability of predicting a successful measurement a prerequisite for mission approval. However, their uncertainties lies in unmeasured physical parameters of the Mars regolith.     

Using high-energy proton fluence to improve risk prediction for consequences of solar particle events

The potential for exposure to large solar particle events (SPEs) with high energy levels is a major concern during interplanetary transfer and extra-vehicular activities (EVAs) on the lunar and Mars surface. Previously, we have used data from the last 5 solar cycles to estimate percentiles of dose to a typical blood-forming organ (BFO) for a hypothetical astronaut in a nominally shielded spacecraft during a 120-d lunar mission. As part of this process, we made use of complete energy spectra for 34 large historical SPEs to calculate what the BFO mGy-Eq dose would have been in the above lunar scenario for each SPE. From these calculated doses, we then developed a prediction model for BFO dose based solely on an assumed value of integrated fluence above 30 MeV (Φ₃₀) for an otherwise unspecified future SPE. In this study, we reasoned that since BFO dose is determined more by protons with higher energies than by those with lower energies, more accurate BFO dose prediction models could be developed using integrated fluence above 60 (Φ₆₀) and above 100 MeV (Φ₁₀₀) as predictors instead of Φ₃₀. However to calculate the unconditional probability of a BFO dose exceeding a pre-specified limit (“BFO dose risk”), one must also take into account the distribution of the predictor (Φ_30,Φ₆₀, or Φ₁₀₀), as estimated from historical SPEs. But Φ₆₀ and Φ₁₀₀ have more variability, and less available historical information on which to estimate their distributions over many SPE occurrences, than does Φ₃₀. Therefore, when estimating BFO dose risk there is a tradeoff between increased BFO dose prediction at a given energy threshold and decreased accuracy of models for describing the distribution of that threshold over future SPEs as the threshold increases. Even when taking the second of these two factors into account, we still arrived at the conclusion that overall prediction improves as the energy level threshold increases from 30 to 60 to 100 MeV. These results can be applied to the development of approaches to improve radiation protection of astronauts and the optimization of mission planning for future space missions.