Geomagnetic activity driven by solar wind turbulence

Within the framework of the solar wind—magnetosphere coupled system, intense perturbations in the solar wind, causing geomagnetic storms and substorms, have been widely studied by means of the so-called coupling parameters. However, remarkable variations in the geomagnetic field occur even in absence of such perturbations. In those conditions, solar wind MHD turbulence might have a role. Recent results have shown that solar wind turbulence can be described not only as a mixture of inward and outward stochastic Alfvénic fluctuations, but includes also advected structures, dominated by an excess of magnetic energy.     

Fast Probabilistic Particle Identification algorithm using silicon strip detectors

Active detectors used as radiation monitors in space are not usually able to perform Particle Identification (PID). Common techniques need energy loss spectra with high statistics to estimate ion abundances. The ALTEA-space detector system is a set of silicon strip particle telescopes monitoring the radiation environment on board the International Space Station since July 2006 with real-time telemetry capabilities. Its large geometrical factor due to the concurrent use of six detectors permits the acquisition of good energy loss spectra even in a short period of observation. In this paper we present a novel Fast Probabilistic Particle Identification (FPPI) algorithm developed for the ALTEA data analysis in order to perform nuclear identification with low statistics and, with some limitations, also in real time.     

The effects of the solar magnetic polarity and the solar wind velocity on Bz-component of the interplanetary magnetic field

We have studied the effect of both solar magnetic polarity and the solar wind velocity on the Bz-component of the interplanetary magnetic field, IMFBz, for the minimum activity of the solar cycles 21, 22, 23 and 24. We made a statistical study of IMFBz in the first section which is considered as an extension of Lyatsky et al. (2003). They made a statistical study of IMFBz for two periods of minimum solar activity 22 and 23 related to 1985–1987 and 1995–1997 when the solar magnetic field had opposite polarity. Our results seem to be consistent with the results obtained by Lyatsky et al. (2003). We found that there is a dependence of IMFBz on the IMFBx and the solar magnetic polarity for the minimum periods of the selected four solar cycles. In addition, we found that there is a dependence of IMFBz on the solar wind velocity.     

Subsidence rate monitoring of Aghajari oil field based on Differential SAR Interferometry

Land subsidence, due to natural or anthropogenic processes, causes significant costs in both economic and structural aspects. That part of subsidence observed most is the result of human activities, which relates to underground exploitation. Since the gradual surface deformation is a consequence of hydrocarbon reservoirs extraction, the process of displacement monitoring is amongst the petroleum industry priorities. Nowadays, Differential SAR Interferometry, in which satellite images are utilized for elevation change detection and analysis – in a millimetre scale, has proved to be a more real-time and cost-effective technology in contrast to the traditional surveying method. In this study, surface displacements in Aghajari oil field, i.e. one of the most industrious Iranian hydrocarbon sites, are being examined using radar observations. As in a number of interferograms, the production wells inspection reveals that surface deformation signals develop likely due to extraction in a period of several months. In other words, different subsidence or uplift rates and deformation styles occur locally depending on the geological conditions and excavation rates in place.     

The Lunar Gravity Ranging System for the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Lunar Gravity Ranging System (LGRS) flying on NASA’s Gravity Recovery and Interior Laboratory (GRAIL) mission measures fluctuations in the separation between the two GRAIL orbiters with sensitivity below 0.6 microns/Hz^1/2. GRAIL adapts the mission design and instrumentation from the Gravity Recovery and Climate Experiment (GRACE) to a make a precise gravitational map of Earth’s Moon. Phase measurements of Ka-band carrier signals transmitted between spacecraft with line-of-sight separations between 50 km to 225 km provide the primary observable. Measurements of time offsets between the orbiters, frequency calibrations, and precise orbit determination provided by the Global Positioning System on GRACE are replaced by an S-band time-transfer cross link and Deep Space Network Doppler tracking of an X-band radioscience beacon and the spacecraft telecommunications link. Lack of an atmosphere at the Moon allows use of a single-frequency link and elimination of the accelerometer compared to the GRACE instrumentation. This paper describes the implementation, testing and performance of the instrument complement flown on the two GRAIL orbiters.     

Testing baseline stability of some neutron monitors in Europe,Africa, and Asia

For six decades, the global network of neutron monitors (NMs) has provided a continuous stream of very valuable data to the heliophysics community, leading to many insights into the myriad modes of charged particle transport in the tangled magnetic fields that permeate the 3D heliosphere. Earlier, Ahluwalia and Ygbuhay (2012) reported on the drifts in some high latitude NM counting rates in the American zone. We continue our enquiry by testing the stability of the counting rate baselines of some NMs operating in Europe, Africa, and Asia. The data from these detectors have been extremely valuable for the short-term time variation studies, but caution is advised in using the data for long-term studies from NMs with baselines that are drifting for cause(s) unknown.     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented.     

Comparative analysis of mixing chambers for two multiphase flows of oppositely charged particles

In this paper, we formulated the criteria for evaluating the effectiveness of mixing chambers, needed in obtaining polymeric materials with reproducible properties. The results of comparative analysis of organizing the methods for mixing two multiphase flows of oppositely charged particles are presented. This analysis, carried out using CFD programs, shows that the mixing chamber construction in which the flows being mixed are directed at an angle to each other, and additional gas flow inlets are provided in the lateral wall, is the most efficient.