Magnetic reconnection in solar coronal loops

Simulations of the evolution of kink modes in line-tied coronal loops are presented which demonstrate the occurrence of magnetic reconnection in the non-linear stage of the instability. In loops which do not carry a net axial current (and are confined by a potential purely axial field) the reconnection is limited to the initial current-carrying channel and no overall loss of confinement is observed. In loops which carry a net current on the other hand, reconnection progressively involves field lines at greater and greater distances from the axis and even regions where the field was initially potential, leading to a total disruption of the magnetic field topology.     

Relativistic electron fluxes and dose rate variations during April–May 2010 geomagnetic disturbances in the R3DR data on ISS

Space radiation has been monitored successfully using the Radiation Risks Radiometer-Dosimeter (R3D) installed at the ESA EXPOSE-R (R3DR) facility outside of the Russian Zvezda module of the International Space Station (ISS) between March 2009 and January 2011. R3DR is a Liulin type spectrometer–dosimeter with a single Si PIN detector 2 cm² of area and 0.3 mm thick. The R3DR instrument accumulated about 2 million measurements of the absorbed dose rate and flux of 10 s resolution. The total external and internal shielding before the detector of R3DR device is 0.41 g cm⁻². The calculated stopping energy of normally incident particles to the detector is 0.78 MeV for electrons and 15.8 MeV for protons. After the Coronal Mass Ejection (CME) at 09:54 UTC on 3 April 2010, a shock was observed at the ACE spacecraft at 0756 UTC on 5 April, which led to a sudden impulse on Earth at 08:26 UTC. Nevertheless, while the magnetic substorms on 5 and 6 of April were moderate; the second largest in history of GOES fluence of electrons with energy >2 MeV was measured. The R3DR data show a relatively small amount of relativistic electrons on 5 April. The maximum dose rate of 2323 μGy day⁻¹ was reached on 7 April; by 9 April, a dose of 6600 μGy was accumulated. By the end of the period on 7 May 2010 a total dose of 11,587 μGy was absorbed. Our data were compared with AE-8 MIN, CRESS and ESA-SEE1 models using SPENVIS and with similar observations on American, Japanese and Russian satellites.     

蜂窝夹层结构弯曲疲劳寿命预测研究

复合材料夹层板兼具轻质高承载特性,但也面临多样的失效模式,深入研究其性能与失效机理,对确保结构安全与效能至关重要.针对一种玻璃纤维/氰酸酯织物层压面板和Nomex蜂窝复合的夹层板,采用特殊设计的试验夹具,开展三点弯曲静力和疲劳试验,分析该夹层板的弯—剪承载特性,观察其疲劳损伤和失效现象;同时,根据夹层板承力特点,对受面内力的面板和受面外剪切的芯材分别建立疲劳损伤模型,借助夹层板等效有限元模型,预测夹层板弯曲疲劳寿命.结果表明:所推荐的预测方法能够合理地反映夹层板弯曲疲劳损伤过程,疲劳寿命预测结果略为保守,与实测寿命误差属于可接受范围.     

On the stability of stationary motions of a system of coaxial bodies

We consider the stability of stationary motions of a model of a spacecraft as a system of coaxial bodies with small asymmetry caused by the shift of the axes of dynamic symmetry of bodies relative to the axis of rotation. We determine the stationary motions of the system; their stability is studied with respect to both the projections of angular velocity and the position of the axis of rotation. The sufficient conditions for the stability of these stationary motions are obtained by constructing a Lyapunov function, and the necessary conditions are obtained by analyzing the corresponding linearized equations of perturbed motion.     

Space experiments aboard the Lomonosov MSU satellite

At present, the Institute of Nuclear Physics of Moscow State University, in cooperation with other organizations, is preparing space experiments onboard the Lomonosov satellite. The main goal of this mission is to study extreme astrophysical phenomena such as cosmic gamma-ray bursts and ultra-high-energy cosmic rays. These phenomena are associated with the processes occurring in the early universe in very distant astrophysical objects, therefore, they can provide information on the first stages of the evolution of the universe. This paper considers the main characteristics of the scientific equipment aboard the Lomonosov satellite.     

Modification of the SAR step transform algorithm

When the basic step transform algorithm is used to compress synthetic-aperture radar (SAR) signals in azimuth, the linear FM rate and sampling rate must satisfy certain tight constraints. In practice, these constraints cannot be satisfied and errors are introduced into the compressed SAR image. A modification is described of the basic step transform which incorporates interpolation and resampling into the algorithm. These changes allow the removal of the constraints and make the step transform more useful for the compression of real data. An autofocusing capability is also included, without introducing much additional complexity