A (design-oriented) reliability model for active phased arrays insatellite communication systems

This paper proposes a modeling approach to relate the power section reliability of satellite payloads to the on-board antenna complexity. The aim of the model is to support the development of design tools for satellite systems adopting active phased arrays. The achieved results are rendered parametric with respect to a key system requirement, the effective isotropic radiated power, due to its direct impact on transmitter configuration and technological features as well as on the critical compromise between transmitter and antenna specifications     

A fault-tolerant air data/inertial reference unit

The fault-tolerant air data/inertial reference unit (ADIRU) described is a key part of a fault-tolerant air data/inertial reference system (ADIRS) designed to be the inertial and air data reference for the ARINC 651 Integrated Modular Avionics (IMA) distributed architecture. The ADIRU has been designed to meet the commercial aviation market demands for low life cycle cost and high integrity fault detection, fault isolation, and redundancy management. The ADIRU's internal redundant resources provide quad channel redundancy that is one level higher than conventional triple redundant systems, allowing it to provide deferred maintenance capability. Robust partitioning, simple serial internal interfaces, and simple voting planes ensure that internal redundant components are properly utilized to provide high integrity system outputs. This relieves systems using it from having to perform their own redundancy management of the air data and inertial outputs from multiple sources required by conventional systems     

A two-dimensional position-sensitive spectroscopic proportional counter for balloon-borne hard X-ray astronomy

A new design of position sensitive spectroscopic proportional counter is described, for use in a balloon borne hard x-ray telescope. Initial position and spectral resolution data from a one-dimensional laboratory prototype are reported. With this device, the final telescope will have an angular resolution of better than 10 minutes of arc.     

Preliminary results of Cytos 2 experiment.

Cytos 2 experiment, carried out during the French-Soviet manned flight (July 1982), has studied the antibiotics sensitivity of bacteria cultivated in vitro during the orbital flight. The results show an increase of the antibiotics resistance and a larger thickness of the cellular envelope for the inflight cells. The increase of antibiotics resistance can be related to a stimulating effect of space on the cell growth rate or to changes of the cellular envelope structure.     

Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

Experimental investigations of the 10 N catalytic hydrazine thruster

Experimental investigations of the 10 N catalytic hydrazine thruster are reported. These thrusters find applications in orbit raising functions of a spacecraft. The hardware was realized and tested in a vacuum chamber (10^?3 mbar vacuum) for its performance. When tested at the design propellant supply pressure of 21.5 bar the thruster developed 10.25 N thrust at an operating chamber pressure of 16.4 bar. The thruster was also tested for off-design conditions (24, 18 and 14.5 bar propellant supply pressures) of operation to determine the steady-state performance. The chamber pressure and vacuum thrust follow more or less a linear law with the propellant-supply pressure. The thruster was also tested for its response characteristics for short (100 ms) firing durations at various propellant-supply pressures (15.5, 18.8, 22.5, 25.6 and 29.5 bar) and the experimental results are reported and discussed. The hydrazine was injected at the room temperature (300^±5 K).     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

Hardware-in-the-loop testing technology for integrated control and condition monitoring systems of aircraft gas turbine engines

Hardware-in-the-loop testing technology for automatic control, condition monitoring and diagnostics systems of gas turbine engines is described. The technology proposed makes it possible to simulate combinations and chains of unexpected and gradual failures of engines, transducers and actuators.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.