Effective speed-up of slowly responding measurement systems.

In some applications, the slow response of measurement systems can present significant control problems or cause difficulties in interpreting data sequences, even though they are quite accurate in indicating the value of an unchanging measured parameter. Happily, instrument systems often have characteristics which make it possible to apply certain advanced systems control techniques which can compensate for the inherent slowness of the instrument system. In this paper, some means of dealing with this pmblem in some scenarios are described.     

Effect of Dimensions on the Efficiency of Radiant Energy Cells

This paper deals with the enhancement of the quantum efficiency and photovoltaic energy conversion efficiency of a p-n semiconducting cell by optimizing the dimensions of the cell. Based on the Shockley-Read statistics a general expression for the quantum efficiency of monochromatic incident radiant energy photons has been derived in terms of the absorption coefficient of the incident photons, the minority carrier diffusion length, the built-in electrostatic field appearing in diffused cells, and the surface recombination velocity in the exposed layer of the cell. Although the expressions derived may be used for all semiconducting p-n cells, special efforts have been made in the analysis and computations of the germanium p-n cell. The germanium cells show a great potential for photovoltaic energy conversion from radiant sources other than the sun. The results for germanium indicate that the quantum efficiency strongly depends upon the thicknesses of the exposed and base layers. The built-in electrostatic field and the surface recombination velocity in the exposed layer influence the quantum efficiency greatly. Optimization studies for the thicknesses of the exposed and base layers of an n-p type germanium for different values of minority carrier diffusion length, built-in electrostatic field, and surface recombination velocity have been worked out.     

Prototype design and testing of a Venus long duration,high altitude balloon

This paper describes the design, fabrication and testing of a full scale prototype balloon intended for long duration flight in the upper atmosphere of Venus. The balloon is 5.5 m in diameter and is designed to carry a 45 kg payload at an altitude of 55 km. The balloon material is a 180 g/m² multi-component laminate comprised of the following layers bonded together from outside to inside: aluminized Teflon film, aluminized Mylar film, Vectran fabric and a polyurethane coating. This construction provides the required balloon functional characteristics of low gas permeability, sulfuric acid resistance and high strength for superpressure operation. The design burst superpressure is 39,200 Pa which is predicted to be 3.3 times the worst case value expected during flight at the highest solar irradiance in the mission profile. The prototype is constructed from 16 gores with bi-taped seams employing a sulfuric acid resistant adhesive on the outside. Material coupon tests were performed to evaluate the optical and mechanical characteristics of the laminate. These were followed by full prototype tests for inflation, leakage and sulfuric acid tolerance. The results confirmed the suitability of this balloon design for use at Venus in a long duration mission. The various data are presented and the implications for mission design and operation are discussed.     

Solar modulation model with reentrant particles

We developed a one dimensional model of particle transport in the heliosphere. As opposite to widely used models, we apply a method where a quasi-particle is traced back in time. The model gives us the possibility to work on the possible existence of reentrant particles in the heliosphere that can be hardly solved by the traditional forward tracking method. Particles escape from the heliosphere and may reenter back. We estimate how these particles affect the modulation process in the heliosphere. Presented here are the results for different values of particles mean free path in the interstellar space and for different interstellar magnetic field values.     

“Modular Biospheres” – New testbed platforms for public environmental education and research

This paper will review the potential of a relatively new type of testbed platform for environmental education and research because of the unique advantages resulting from their material closure and separation from the outside environment. These facilities which we term “modular biospheres”, have emerged from research centered on space life support research but offer a wider range of application. Examples of this type of facility include the Bios-3 facility in Russia, the Japanese CEEF (Closed Ecological Experiment Facility), the NASA Kennedy Space Center Breadboard facility, the Biosphere 2 Test Module and the Laboratory Biosphere. Modular biosphere facilities offer unique research and public real-time science education opportunities. Ecosystem behavior can be studied since initial state conditions can be precisely specified and tracked over different ranges of time. With material closure (apart from very small air exchange rate which can be determined), biogeochemical cycles between soil and soil microorganisms, water, plants, and atmosphere can be studied in detail. Such studies offer a major advance from studies conducted with phytotrons which because of their small size, limit the number of organisms to a very small number, and which crucially do not have a high degree of atmospheric, water and overall material closure. Modular biospheres take advantage of the unique properties of closure, as representing a distinct system “metabolism” and therefore are essentially a “mini-world”. Though relatively large in comparison with most phytotrons and ecological microcosms, which are now standard research and educational tools, modular biospheres are small enough that they can be economically reconfigured to reflect a changing research agenda. Some design elements include lighting via electric lights and/or sunlight, hydroponic or soil substrate for plants, opaque or glazed structures, and variable volume chambers or other methods to handle atmospheric pressure differences between the facility and the outside environment.     

Revised upper limit on the internal magnetic moment of Venus

Over four Venus years of low altitude nightside PVO magnetometer observations are used to establish a new upper limit for the magnetic moment of Venus. Improvements over previous studies include data coverage and new instrument calibration information. The upper limit on an internal dipole moment is determined to be 8.4 × 10¹⁰ T m³.     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

Amorphous Silicon Electronic Devices and their Applications

Hydrogenated amorphous Si (a-Si:H) devices first made a significant impact in photovoltaic application, 70% of the photovoltaic solar cells produced in Japan in 1984 were a-Si:H. More recently, thin film transistor (TFT) and sensor devices have been developed for consumer and business products. The ability to produce large area uniform films of a-Si:H makes the application of TFTs and sensors well suited for input and output imaging devices such as image scanners, display and printers. This paper reviews the operation, material issues and physics of a-Si:H TFTs and sensors. The circuit and technology issues in large area systems incorporating these devices are described.     

Astrophysical implications of higher-dimensional gravity

We review the implications of modern higher-dimensional theories of gravity for astrophysics and cosmology. In particular, we discuss the latest developments of STM theory in connection with dark matter, particle dynamics and the cosmological constant, as well as related aspects of quantum theory. There are also more immediate tests of extra dimensions, notably involving perturbations of the cosmic 3K microwave background and the precession of a supercooled gyroscope in Earth orbit. We also outline some general features of embeddings, and include pictures of the big bang as viewed from a higher dimension.