Research on Biolab, a multi-user facility for APM

A study carried out by a team of seven scientists appointed by ESA resulted in the design of a biological laboratory "Biolab" for Columbus APM. The basis for the study were four pre-Phase A studies performed by industry on the assumption that 15 racks would be available to biology and biotechnology in the APM. Due to the constraints newly imposed by the Columbus project, only five racks are now allocated. The tasks of the Biolab scientific team were: (i) to define the scientific objectives of biological research in Columbus; (ii) to review the requirements of the industrial studies; and (iii) to design a multi-purpose facility compatible with the present constraints and satisfying the requirements of the biological investigations considered in the four studies. The Biolab team was able to define a facility capable of accommodating in five racks the following biological objects: small plants (up to 40 cm), insects like drosophila, frog eggs, single cells from animals, bacteria, slime molds and protozoa, as well as human physiology, but restricted to general diagnostic needs. The Biolab facility includes instruments and devices providing the capacity of holding and/or growing the organisms as well as to perform basic experimentation and a minimum essential diagnostic inflight. Within the growth unit the growth chambers/incubators are exchangeable, permitting the use of growth chambers of different sizes. The temperature will be adjustable to the requirements of the objects under investigation, i.e. either 20 or 37 degrees C. Thus a considerable level of flexibility will permit to investigate a broad spectrum of living systems.     

Short-wave infrared reflectance investigation of sites of paleobiological interest: applications for Mars exploration

Rover missions to the rocky bodies of the Solar System and especially to Mars require lightweight, portable instruments that use minimal power, require no sample preparation, and provide suitably diagnostic mineralogical information to an Earth-based exploration team. Short-wave infrared (SWIR) spectroscopic instruments such as the Portable Infrared Mineral Analyser (PIMA, Integrated Spectronics Pty Ltd., Baulkham Hills, NSW, Australia) fulfill all these requirements. We describe an investigation of a possible Mars analogue site using a PIMA instrument. A survey was carried out on the Strelley Pool Chert, an outcrop of stromatolitic, silicified Archean carbonate and clastic succession in the Pilbara Craton, interpreted as being modified by hydrothermal processes. The results of this study demonstrate the capability of SWIR techniques to add significantly to the geological interpretation of such hydrothermally altered outcrops. Minerals identified include dolomite, white micas such as illite-muscovite, and chlorite. In addition, the detection of pyrophyllite in a bleached and altered unit directly beneath the succession suggests acidic, sulfur-rich hydrothermal activity may have interacted with the silicified sediments of the Strelley Pool Chert.     

密集型空气雾化流场破碎特征数学模型研究

低速液体射流在高速湍流气体作用下的气液同轴射流雾化流场是瞬态密集型喷雾场,高速湍流中影响和控制雾化的因素很多。针对空气雾化流场液核分布与特征进行分析,开发了模拟液核的随机浸入体模型,结合大涡模拟方法对同轴射流空气雾化喷嘴下游流场进行数值模拟。模拟结果与实验结果对比表明：随机浸入体模型可快速捕捉液核的长度和位置信息。当气液动量比M为3~10000时,能够较准确地预测液核长度,当M>10时,其预测结果远优于唯象模型;该模型能够捕捉回流区、大尺度涡等流场结构。同时,可以准确地预测喷嘴附近的液滴粒径,特别是在气流速度较大（>60m/s）时,液滴平均直径预测误差<10%。     

一种新型多普勒噪声抑制技术对BepiColombo任务无线电科学实验的性能提升

在欧洲空间局和日本宇宙开发机构联合开展的BepiColombo水星任务中,将开展水星轨道器无线电科学实验,包括估计水星的引力场及其旋转状态,并对广义相对论进行验证。目前地面系统和星上设备的主流配置可以在无线电科学实验中建立X/X、X/Ka和Ka/Ka多个频段的链路,测速精度可达3 um/s（1 000 s积分）,测距精度为20 cm。提出了基于时延机械噪声对消技术提高无线电科学实验性能的方案。时延机械噪声对消技术需要处理在两个测站不同时刻的测量数据,一个测站实施双向多普勒测距,对另一个单收测站的要求较为严格,该测站需要具有较好的对流层条件。这种方法能够显著降低Ka频段双向链路的主要测量噪声,包括由对流层和天线机械系统震动引起的噪声。我们给出了端到端的仿真性能,并估计了在使用时延机械噪声对消技术前提下的水星引力场和旋转状态。考虑使用NASA位于美国本土戈尔德斯敦的DSS-25天线或欧空局位于阿根廷马拉圭的DSA-3天线作为双程测量站,并考虑使用位于智力的APEX天文观测天线作为单收站。分析结果表明在最好的噪声条件下,使用DSA-3天线作为双程测量站时,时延机械噪声对消技术可将待估计的全局和局部参数的估计精度提升一倍。对于无线电科学实验的目标,这一可能的性能提升对行星地质物理学很有意义,它将有益于研究水星内部的结构。     

Calcification and silicification: fossilization potential of cyanobacteria from stromatolites of Niuafo'ou's Caldera Lakes (Tonga) and implications for the early fossil record

Calcification and silicification processes of cyanobacterial mats that form stromatolites in two caldera lakes of Niuafo'ou Island (Vai Lahi and Vai Si'i) were evaluated, and their importance as analogues for interpreting the early fossil record are discussed. It has been shown that the potential for morphological preservation of Niuafo'ou cyanobacteria is highly dependent on the timing and type of mineral phase involved in the fossilization process. Four main modes of mineralization of cyanobacteria organic parts have been recognized: (i) primary early postmortem calcification by aragonite nanograins that transform quickly into larger needle-like crystals and almost totally destroy the cellular structures, (ii) primary early postmortem silicification of almost intact cyanobacterial cells that leave a record of spectacularly well-preserved cellular structures, (iii) replacement by silica of primary aragonite that has already recrystallized and obliterated the cellular structures, (iv) occasional replacement of primary aragonite precipitated in the mucopolysaccharide sheaths and extracellular polymeric substances by Al-Mg-Fe silicates. These observations suggest that the extremely scarce earliest fossil record may, in part, be the result of (a) secondary replacement by silica of primary carbonate minerals (aragonite, calcite, siderite), which, due to recrystallization, had already annihilated the cellular morphology of the mineralized microbiota or (b) relatively late primary silicification of already highly degraded and no longer morphologically identifiable microbial remains.     

Abundance and diversity of microbial inhabitants in European spacecraft-associated clean rooms

The determination of the microbial load of a spacecraft en route to interesting extraterrestrial environments is mandatory and currently based on the culturable, heat-shock-surviving portion of microbial contaminants. Our study compared these classical bioburden measurements as required by NASA's and ESA's guidelines for the microbial examination of flight hardware, with molecular analysis methods (16S rRNA gene cloning and quantitative PCR) to further develop our understanding of the diversity and abundance of the microbial communities of spacecraft-associated clean rooms. Three samplings of the Herschel Space Observatory and its surrounding clean rooms were performed in two different European facilities. Molecular analyses detected a broad diversity of microbes typically found in the human microbiome with three bacterial genera (Staphylococcus, Propionibacterium, and Brevundimonas) common to all three locations. Bioburden measurements revealed a low, but heterogeneous, abundance of spore-forming and other heat-resistant microorganisms. Total cell numbers estimated by quantitative real-time PCR were typically 3 orders of magnitude greater than those determined by viable counts, which indicates a tendency for traditional methods to underestimate the extent of clean room bioburden. Furthermore, the molecular methods allowed the detection of a much broader diversity than traditional culture-based methods.     

The PROCESS experiment: an astrochemistry laboratory for solid and gaseous organic samples in low-earth orbit

The PROCESS (PRebiotic Organic ChEmistry on the Space Station) experiment was part of the EXPOSE-E payload outside the European Columbus module of the International Space Station from February 2008 to August 2009. During this interval, organic samples were exposed to space conditions to simulate their evolution in various astrophysical environments. The samples used represent organic species related to the evolution of organic matter on the small bodies of the Solar System (carbonaceous asteroids and comets), the photolysis of methane in the atmosphere of Titan, and the search for organic matter at the surface of Mars. This paper describes the hardware developed for this experiment as well as the results for the glycine solid-phase samples and the gas-phase samples that were used with regard to the atmosphere of Titan. Lessons learned from this experiment are also presented for future low-Earth orbit astrochemistry investigations.     

The Mawrth Vallis region of Mars: A potential landing site for the Mars Science Laboratory (MSL) mission

The primary objective of NASA's Mars Science Laboratory (MSL) mission, which will launch in 2011, is to characterize the habitability of a site on Mars through detailed analyses of the composition and geological context of surface materials. Within the framework of established mission goals, we have evaluated the value of a possible landing site in the Mawrth Vallis region of Mars that is targeted directly on some of the most geologically and astrobiologically enticing materials in the Solar System. The area around Mawrth Vallis contains a vast (>1?×?10? km2) deposit of phyllosilicate-rich, ancient, layered rocks. A thick (>150?m) stratigraphic section that exhibits spectral evidence for nontronite, montmorillonite, amorphous silica, kaolinite, saponite, other smectite clay minerals, ferrous mica, and sulfate minerals indicates a rich geological history that may have included multiple aqueous environments. Because phyllosilicates are strong indicators of ancient aqueous activity, and the preservation potential of biosignatures within sedimentary clay deposits is high, martian phyllosilicate deposits are desirable astrobiological targets. The proposed MSL landing site at Mawrth Vallis is located directly on the largest and most phyllosilicate-rich deposit on Mars and is therefore an excellent place to explore for evidence of life or habitability.     

Computational aerodynamic analysis on perimeter reinforced （PR）-compliant wing

Abstract Implementing the morphing technique on a micro air vehicle （MAV） wing is a very chal- lenging task, due to the MAWs wing size limitation and the complex morphing mechanism. As a result, understanding aerodynamic characteristics and flow configurations, subject to wing structure deformation of a morphing wing MAV has remained obstructed. Thus, this paper presents the investigation of structural deformation, aerodynamics performance and flow formation on a pro- posed twist morphing MAV wing design named perimeter reinforced （PR）-compliant wing. The numerical simulation of two-way fluid structure interaction （FSI） investigation consist of a quasi- static aeroelastic structural analysis coupled with 3D incompressible Reynolds-averaged Navier- Stokes and shear-stress-transport （RANS-SST） solver utilized throughout this study. Verification of numerical method on a rigid rectangular wing achieves a good correlation with available exper- imental results. A comparative aeroelastic study between PR-compliant to PR and rigid wing per- formance is organized to elucidate the morphing wing performances. Structural deformation results show that PR-compliant wing is able to alter the wing＇s geometric twist characteristic, which has directly influenced both the overall aerodynamic performance and flow structure behavior. Despite the superior lift performance result, PR-compliant wing also suffers from massive drag penalty, which has consequently affected the wing efficiency in general. Based on vortices investigation, the results reveal the connection between these aerodynamic performances with vortices formation on PR-comoliant wing.     

边界层对可调节进气道性能的影响

给出了马赫数2-6、单位雷诺数（0．8-6．0）×10^7／m时下吹式风洞中可调节三维进气道的试验研究结果。研究了前缘前掠和后掠方案以及进气道人口前边界层的影响。测量了内流道内的压力分布、质量流量和总压恢复系数;确定了进气道启动与马赫数和流动工况的关系。研究结果表明：边界层对流场结构和模型进气道的性能有着决定性影响,相对简单的进气道调节方案可以增大其稳定运行范围。