An approach to forming the design performance of the attitude control system for small spacecraft

The elements for various types of attitude control systems used in a number of small spacecraft are considered. An approach for assessment of such system effectiveness based on design requirements for spacecraft purpose and restriction in accuracy, mass and energy is proposed.     

One-kVA, Three-Phase dc-ac Inverter with Digital Control

This paper describes a method of applying digital techniques to the control of a 1-kVA three-phase dc-ac inverter to generate a sinusoidal 400-Hz output, using high-frequency bridge-chopper techniques. The model which was constructed used predominantly off-theshelf digital microcircuits and resulted in a device with an overall efficiency of 85 percent, in a 0.52 cubic-foot package which weighed 19.5 lbs. Sinusoidal output with less than 2 percent harmonic distortion at 115 volts line to neutral was obtained with 28 volts dc input.     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

Potential Effects of Surface Temperature Variations and Disturbances and Thermal Convection on the Mars InSight HP<Superscript>3</Superscript> Heat-Flow Determination

The HP³ instrument on the InSight lander mission will measure subsurface temperatures and thermal conductivities from which heat flow in the upper few meters of the regolith at the landing site will be calculated. The parameter to be determined is steady-state conductive heat flow, but temperatures may have transient perturbations resulting from surface temperature changes and there could be a component of thermal convection associated with heat transport by vertical flow of atmospheric gases over the depth interval of measurement. The experiment is designed so that it should penetrate to a depth below which surface temperature perturbations are smaller than the required measurement precision by the time the measurements are made. However, if the measurements are delayed after landing, and/or the probe does not penetrate to the desired depth, corrections may be necessary for the transient perturbations. Thermal convection is calculated to be negligible, but these calculations are based on unknown physical properties of the Mars regolith. The effects of thermal convection should be apparent at shallow depths where transient thermal perturbations would be observed to deviate from conductive theory. These calculations were required during proposal review and their probability of predicting a successful measurement a prerequisite for mission approval. However, their uncertainties lies in unmeasured physical parameters of the Mars regolith.