Environmental stress level evaluation approach based on physical model and interval grey association degree

 Associating environmental stresses (ESs) with built-in test (BIT) output is an important means to help diagnose intermittent faults (IFs). Aiming at low efficiency in association of traditional time stress measurement device (TSMD), an association model is built. Thereafter, a novel approach is given to evaluate the integrated environmental stress (IES) level. Firstly, the selection principle and approach of main environmental stresses (MESs) and key characteristic parameters (KCPs) are presented based on fault mode, mechanism, and ESs analysis (FMMEA). Secondly, reference stress events (RSEs) are constructed by dividing IES into three stress levels according to its impact on faults; and then the association model between integrated environmental stress event (IESE) and BIT output is built. Thirdly, an interval grey association approach to evaluate IES level is proposed due to the interval number of IES value. Consequently, the association output can be obtained as well. Finally, a case study is presented to demonstrate the proposed approach. Results show the proposed model and approach are effective and feasible. This approach can be used to guide ESs measure, record, and association. It is well suited for on-line assistant diagnosis of faults, especially IFs.     

基于刃边法的星载相机在轨MTF测量精度分析

调制传递函数(MTF)反映可见光对地遥感系统在对地物成像过程中信号的扩散与削弱程度,是表达系统辐射性能的重要指标.文章对星载可见光CCD相机在轨MTF主要测量方法进行比对分析,通过数据仿真,重点对随机噪声、边缘探测与拟合等主要影响刃边法精度的因素进行了分析.分析结果表明,计算所用刃边法能够较准确地计算可见光遥感系统的M...     

不同截面机身头部吹气方式对侧向力的影响

研究了机身头部法向吹气和具有不同指向角的喷管切向吹气对于不同截面的机身前体所产生的影响.在风洞中采用测力的方法给出了不同截面形状的非细长机身的实验结果.讨论了迎角、吹气方式、喷管指向角及截面形状对机身侧力的影响.实验表明,法向吹气和喷管切向吹气都是有效的控制手段,吹气对其中圆锥截面模型的影响最大,椭圆截面模型次之,对带棱截面模型影响最小.      

民用飞机副翼舱结构振动疲劳寿命预计

副翼舱是民用飞机重要部件之一,主要作用为连接副翼并对安装副翼提供支持,将副翼的气动载荷传递到主翼盒上。当受到气动力及其他激励时副翼舱结构产生结构振动响应。副翼舱结构振动疲劳寿命需满足民用飞机适航条款要求,为表明满足适航条款符合性,对随机动载荷激励下副翼舱结构进行振动疲劳寿命预计具有重要意义。以民用飞机副翼舱结构为研究对象,基于试飞实测应变数据、金属材料的随机振动S-N曲线和改进声疲劳寿命估算法,提出了一种适用于振动疲劳寿命预计的工程处理方法。通过飞行试验、有限元仿真、数据分析等相结合的方法进行副翼舱结构优化前后的振动疲劳寿命预计。副翼舱结构优化前损伤位置预测寿命最低为59飞行小时,符合实际损伤位置寿命情况。副翼舱结构优化后应力水平明显降低,寿命满足要求。结果表明：基于实测数据的副翼舱结构振动疲劳寿命预计方法有效,可作为振动疲劳寿命预计的工程处理方法。     

防空导弹武器系统与反辐射导弹的对抗研究

首先概述了防空导弹武器系统,介绍了其主要技战术性能及关键技术的现状和发展趋势。接着概述了反辐射导弹,介绍反辐射导弹的主要特性及其关键技术和发展趋势。最后探讨了防空导弹武器系统与反辐射导弹的对抗措施。     

预报误差法在伺服系统时域辨识中的应用与实现

介绍了系统辨识中的预报误差法的基本原理,设计了一种简洁通用的软硬件辨识平台。成功地应用预报误差的辨识方法对一个实际的中功率雷达伺服系统实现了时域辨识,得到了该伺服系统比较准确的模型。将辨识结果与一般最小二乘法的辨识结果进行了比较,发现此辨识方法在抑制噪声方面有很大的改进。     

中小型环模试验设备中局域网应用的设计

文章规划了中小型环模试验设备的热真空系统、常压热循环系统、无油超高系统等组成的局域网,以期在不断的实践中完善系统,充实并扩大组网内涵,实现环模试验的现代化管理。     

Introduction to global short message communication service of BeiDou-3 navigation satellite system

Short Message Communication (SMC) is a featured service of BeiDou Navigation Satellite System (BDS). After its successful deployment in 2003, Regional Short Message Communication (RSMC) service has been continuously serving China and its neighboring countries and regions, especially in life safety scenarios. In this paper, the architecture of the Global Short Message Communication (GSMC) system is proposed based on the medium earth orbit (MEO) constellation and the crosslinks of the global BeiDou navigation system (BDS-3). Three subtypes of GSMC service, i.e. positioning report, emergency search and rescue (SAR) and regular SMC are designed in accordance with the technical characteristic of integration of navigation and communication in BDS-3, which supports future wide applications of GSMC. The performance of the designed GSMC system is analyzed by numerical calculations. As BDS-3 was officially announced completion on July 31, 2020, GSMC has been providing initial service. First test results of the in orbit GSMC payloads are also presented in the paper to verify the designed capabilities. Preliminary results also show that the requirements of Global Maritime Distress and Safety System (GMDSS) can also be fulfilled.     

双边界代数法在喷管内流场网格生成中的应用

用一种双边界代数方法生成二维网格，通过在超限插值函数中引入边界的一阶导数实现网格与边界是的正交，采用几何一致性条件保证物理区域不变形，发展一系列拉伸方程控制网格在边界或给定位置的间距。应用此方法生成了满意的喷管内流场网格，网格生成效率明显优于微分方程网格生成方法。     

微型导弹捷联光学制导信息提取方法研究

微型导弹体积小、成本低、精度高,可用于近距离攻击低小慢目标和地面人员车辆,采用捷联可见光导引头制导是比较合理的方案,因此高精度捷联制导信息的提取成为关键.为获取更高精度的制导信息,需要改进提取方法.匹配滤波理论是在考虑传感器不同的动力学特性情况下的一种信息融合方法,依据传感器动态特性进行信息匹配的方法提高制导信息提取精度.首先建立捷联光学成像导引头及其在制导控制系统中的简化模型,依据导引头上各种传感器主要指标,及匹配滤波的原则,推导出相位匹配器.最后,对匹配后的系统提取制导信息,并参与制导系统半实物测试,对比传统惯性滤波器与相位匹配滤波器的效果.结果说明在相位匹配滤波的提取方法获得的视线角速率精度比传统惯性滤波提取方法提高了1倍.