Assessing ecohydrological factors variations and their relationships at different spatio-temporal scales in semiarid area,northwestern China

As a typical semiarid farming-pastoral ecotone sensitive to the environmennt, the Plain of West Liaohe Basin (WLBP) is currently experiencing drastic environmental changes. To identify how environmental change affect vegetation in the WLBP, we analysed spatiotemporal variation characteristics of Ecological environment factors based on monthly and annual air temperature (T), precipitation (P) and Normalized Difference Vegetation Index (NDVI) from 1982 to 2015. And the correlations between them were investigated by correlation analysis (Simple correlation, partial correlation and complex correlation) at temporal and spatial scale. The results showed that: (1) the vegetation growth of the WLBP showed ameliorated trend, with a change rate of 0.004/yr.; (2) P was more sensitive to NDVI than T; (3) and the influence of hydrothermal changes on vegetation growth was more significant than that of the change of single climate factors at time scales; (4) the effects of anthropogenic factors on vegetation change were 75.07% (1982–1993) and 98.08% (1994–2015), respectively. At the temp-special scales, P&T and land use type change (LUCC) were the main climatic and anthropogenic factors that affect vegetation changes, respectively.     

《机械制图》作业分项评分的相关性系列水平测定

《机械制图》作业水平测定的目的是综合检测学生的学习成绩，本文的《机械制图》作业分项评分，为综合测定相关性系列水平，提供了可靠的方法。     

纤维增强塑料拉挤型材弯曲强度研究

研究了纤维增强塑料 ( FRP)拉挤型材的弯曲强度。试验结果表明 ,FRP拉挤型材在大跨距 (跨高比 l/h>1 0 )下的弯曲破坏模式通常是梁的纵向开裂 ;FRP拉挤型材由于剪切变形较大 ,强度计算时不能按普通各向同性梁理论进行计算 ,应考虑剪切变形的影响。为此 ,本文应用复合材料薄壁梁理论给出了 FRP拉挤型材在大跨距下弯曲强度计算的半经验公式     

空调冷水变流量设计改进

本文对常规空调冷水变流量系统进行了节能分析，指出按传统设计方法设计的变水量系统不能充分发挥新技术的节能潜力，并提出了改进的设计做法。     

Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture

Milling of the thin-walled workpiece in the aerospace industry is a critical process due to the high flexibility of the workpiece. In this paper, a flexible fixture based on the magnetorheological(MR) fluids is designed to investigate the regenerative chatter suppression during the machining.Based on the analysis of typical structural components in the aerospace industry, a general complex thin-walled workpiece with fixture and damping constraint can be equivalent as a rectangular cantilever beam. On the basis of the equivalent models, natural frequency and mode shape function of the thin-walled workpiece is obtained according to the Euler–Bernoulli beam assumptions. Then,the displacement response function of the bending vibration of the beam is represented by the product of all the mode shape function and the generalized coordinate. Furthermore, a dynamic equation of the workpiece-fixture system considering the external damping factor is proposed using the Lagrangian method in terms of all the mode shape function and the generalized coordinate, and the response of system under the dynamic cutting force is calculated to evaluate the stability of the milling process under damping control. Finally, the feasibility and effectiveness of the proposed approach are validated by the impact hammer experiments and several machining tests.     

数字处理技术在电子侦察中的应用

通过对信号进行侦察的数学模型和一种基于混沌序列的反侦察系统的介绍,讨论了在对抗与反对抗中取得信息优势的关键技术。指出了数字处理技术在电子侦察领域的重要作用及应用状况,并提出了一种新的反侦察技术的设想。     

火箭基组合循环(RBCC)发动机性能分析

介绍了采用引射火箭模式的RBCC发动机工作原理,并在对其概念设计模型进行简化的基础上,进行了RBCC发动机系统性能分析,评估了RBCC发动机系统主要设计参数(发动机系统出口截面直径和燃料化学反应后的总温)的变化对其性能(推力、推力系数和比冲)的影响,认为:1)燃料经过加热后,推力和推力增益都上升了69.97%,比冲增加了180.18%;2)随着二次燃烧过程中燃烧室温度的上升,发动机的推力、推力增益和比冲得到了很大的提高,火箭发动机的性能得到了很好的改善;3)随着RBCC发动机系统出口截面直径的增加,尾气对发动机的反推力、推力增益以及比冲急剧下降,不利于其性能的改善。     

带有参考信号的直接序列扩频系统

扩频通信系统中码同步的精度及其电路的复杂程度直接影响系统的性能、体积和成本。采用发射参考信号法可以简化接收机端的码同步电路 ,从而大大减小遥控遥测系统及无线局域网中扩频接收机的体积和成本。本文给出了采用 MAXIM芯片组实现 UHF频段带有发射参考信号的直接序列扩频系统 ,并通过 System View软件进行了仿真 ,结果表明该方法可获得较好的通信性能 ,易于工程实现     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

圆形太阳翼模态仿真与试验研究

利用有限元软件SAMCEF实现了圆形太阳翼模态仿真分析，探究了翼面预紧力、约束方式和悬吊弹簧重力卸载系统对太阳翼模态的影响。结果显示，翼面预紧力对太阳翼模态影响较大；支撑车约束方式微小影响太阳翼第一阶模态；有支撑车相比无支撑车，太阳翼第一阶模态频率差值可达32.89%，因此地面试验不能使用支撑车；含悬吊弹簧重力卸载系统可有效减轻重力作用对模态的影响；此外，当弹簧刚度小于7 N/m时，其对太阳翼模态的影响小于0.59‰。随后，采用工作模态法和双点激振方式，经预试验优化地面试验方案；采用正弦扫频方法进行模态测试，获得了圆形太阳翼的前四阶模态振型和固有频率。最后，通过有限元模型修正，使模态仿真结果误差保持在4.16%以内，符合测试相关标准的要求。