A Performance Measure for Evaluating Aircraft Landing Trajectories

A general performance index is developed for evaluating aircraft landing trajectories. The primary term in the index is the effect of noise on people residing near the air terminal. Other terms included are passenger comfort, fuel consumed, and the time spent in the near-terminal area. Models are developed for aircraft engine noise, passenger comfort, the population distribution about a specific airport, and the aircraft flight behavior. While this performance index may be used in computing optimal trajectories, it is also useful for comparing nonoptimal trajectories which, for one reason or another, may be worthy of consideration. Some examples of such comparisons are included through simulations of landing. The aircraft considered is a Boeing 737.     

The Electric Antennas for the STEREO/WAVES Experiment

The STEREO/WAVES experiment is designed to measure the electric component of radio emission from interplanetary radio bursts and in situ plasma waves and fluctuations in the solar wind. Interplanetary radio bursts are generated from electron beams at interplanetary shocks and solar flares and are observed from near the Sun to 1 AU, corresponding to frequencies of approximately 16 MHz to 10 kHz. In situ plasma waves occur in a range of wavelengths larger than the Debye length in the solar wind plasma λ _D ≈10 m and appear Doppler-shifted into the frequency regime down to a fraction of a Hertz. These phenomena are measured by STEREO/WAVES with a set of three orthogonal electric monopole antennas. This paper describes the electrical and mechanical design of the antenna system and discusses efforts to model the antenna pattern and response and methods for in-flight calibration.     

Missions to Mercury

Mercury is a very difficult planet to observe from the Earth, and space missions that target Mercury are essential for a comprehensive understanding of the planet. At the same time, it is also difficult to orbit because it is deep inside the Sun’s gravitational well. Only one mission has visited Mercury; that was Mariner 10 in the 1970s. This paper provides a brief history of Mariner 10 and the numerous imaginative but unsuccessful mission proposals since the 1970s for another Mercury mission. In the late 1990s, two missions—MESSENGER and BepiColombo—received the go-ahead; MESSENGER is on its way to its first encounter with Mercury in January 2008. The history, scientific objectives, mission designs, and payloads of both these missions are described in detail.     

Notes on SCPC-FM System Design and Performance

In many domestic satellite communication systems single-channel per-carrier FM (SCPC-FM) has become the accepted transmission method for thin route communication. The SCPC-FM modem operates over a wide range of carrier frequencies and is designed to use satellite power and bandwidth efficiently. It incorporates elements which make the signal transfer complex, so the system behavior is not immediately obvious. This article investigates the signal processes and analyzes the performance of a companded and preemphasized SCPC-FM system and it furnishes insight into the choice of crucial system parameters.     

Conopulse Radar Angle Tracking Accuracy

An analysis is given of the tracking accuracy of a conopulse radar that angle-tracks on target echo pulses. The analysis includes effects of noises in both sum and difference channels, the effect of the tracking range gate's duration, and applies to any shape of radio frequency (RF) pulse envelope. For large single-pulse signalto-noise ratio and any shape of RF pulse envelope, accuracy approaches the theoretical accuracy of a conopulse system when a short-duration range gate is used. The inportant case of rectangular RF pulses is solved in detail.     

Recursive temporal-spatial information fusion with applications totarget identification

Centralized/distributed recursive algorithms for temporal-spatial information integration using the Dempster-Shafer technique are developed. Compared with the Bayesian approach, the Dempster-Shafer technique has the strong capability of handling information uncertainties, which are particularly desirable in many applications. In the centralized integration algorithm, all information is pooled into the central processor and integrated. In contrast, the distributed integration algorithm shares the computational burden among the local processors, which increases the computational efficiency. The developed algorithms are effectively applied to a target identification problem with three sensors: identification of friend-foe-neutral (IFFN), electronic support measurement (ESM), and infrared search and track (IRST)     

Zinc air fuel cell for industrial and specialty vehicles

Metallic Power has demonstrated a regenerative zinc air fuel cell for applications in industrial and specialty vehicles. The fuel cell uses zinc pellets and atmospheric oxygen to generate electric current; the reaction product is zinc oxide, which is collected in a tank. In its present stage of development the 36 V fuel cell will deliver approximately 6 kWh, with a maximum power of 4 kW. The device is refueled at a zinc recycling/refueling station where zinc pellets are pumped into each cell; ZnO is pumped from the tank and replaced with KOH electrolyte. The recycling/refueling unit uses an electrolytic process to convert zinc oxide powder into zinc pellets     

敏捷制造模式下的质量保证信息系统

客户驱动的动态的全球市场及地理上分布的合作伙伴给开发敏捷制造模式下的质量保证信息系统(QAIS)带来了新的挑战,本文先对敏捷制造模式下的QAIS进行了需求分析,提出了新的分布式QAIS的实现框架,利用当前迅速发展的信息技术,建立了QAIS的开发环境并对有关关键技术进行了初步研究,最后开发完成了一个基于Web的QAIS原型系统.     

基因方法在网格结点位置优化中的应用

将基因方法应用于网格结点位置的优化中。文中首先简单介绍了基因优化方法中基于达尔文进化论和Ｍｅｎｄｅｌ基因理论的基本原理,其中包括插索空间表达、三个基因作用器（选择、交配和变异）等要点;然后着重阐述了相关偏微分方程的离散误差和三角形网格几何形状的适应度函数的定义、结点位置的二进制基因表达及基因方法的优化进程。离散误差是在二次非连续彭鼓包（ｂｕｍｐ）函数的空间中近似定义的,并且在点移动过程中相关解的二     

收敛形进气道数值研究的验证

介绍一种新型的、具有最小喉道面积的三维高超声速进气道 (称之为收敛形进气道 )的数值和实验研究结果。表明使用这种形式的进气道 ,在整个飞行速度范围内可以降低阻力和高超声速发动机表面的热防护要求 ,通过降低外压缩表面的倾斜度和减少进气道及燃烧室壁的面积就可以做到这一点。在采用低维次流动的气体动力设计方法的基础上设计成这种形式的进气道。计算是在无粘气体模型构架内用有限体积法进行的。同时用边界层方程计算出计及粘性的气流特性和进气道特性。数值算法是通过收敛形进气道的有限宽楔形外压缩表面的计算和实验数据来验证的。进行实验研究的马赫数M=2～ 1 0 7,基于模型进气道高度的雷诺数Re=( 1～ 5) × 1 0 6。数值计算与实验结果一致性很好。这些结果也和通常的二维进气道的数据作了比较。