超声速燃烧实验研究(Ⅱ)

用电弧加热空气,对带有突扩台阶后扩张形,入口M_a=2.1和3.0的超声速燃烧室进行了实验研究,并对两种不同燃烧室长度、煤油和氢气在垂直和平行喷射下的燃烧状况作了比较。     

三级旋流头部装置末级文氏管喉道面积对出口流场的影响试验研究

文氏管对涡流器具有重要的引流作用.通过改变第III级文氏管的喉道面积大小,探究了其对三级涡流器出口流场的影响.应用粒子图像测速仪(PIV)对三头部试验件的涡流器出口流场进行分析,发现中间涡流器的两个漩涡中心的径向距离随着第III级文氏管喉道面积的增加呈现先减小后增大的趋势.相邻三级涡流器出口流场会叠加,致使中间涡流器的...     

基于空间两点的视觉自主着陆导引算法设计

为提高无人机着陆效率,从着陆速度向量场和导引律设计两方面研究改进。首先,基于椭圆设计速度向量场,实现飞行路程更短、机动性能要求更低的着陆轨迹。然后,基于像素坐标系与机体坐标系的关系,设计无人机的航迹方位角指令;以椭圆切线方向为参考,结合合作矢量特征,设计航迹倾斜角指令;利用图像信息,设计速度大小指令。最后,理论比较了传统轨迹与提出轨迹对方向机动性性能的要求,给出了轨迹参数与无人机方向机动性性能的关系。利用Simulink搭建系统仿真平台,计算满足要求的合作矢量特征。结果表明,无人机以曲线轨迹准确软着陆到目标,满足实际运用的需要。      

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

TEC differences for the mid-latitude ionosphere in both sides of the longitudes with zero declination

Based on measurements of ground-based GPS station network, differences of the mid-latitude ionospheric TEC in the east and west sides of North America, South America and Oceania have been analyzed in this paper. Results show that for nearly all seasons from 2001 to 2010 and in both sides of the longitudes with zero declination, there exist systematic differences for the mid-latitude ionospheric TEC in the regions mentioned above and the features of these differences markedly depend upon the local time but less depend upon seasons and the level of solar activity. Theory analysis shows that the longitude variations of both declination and zonal thermospheric winds are one of important factors to cause differences of the mid-latitude ionospheric TEC in both sides of the longitudes with zero declination.     

导弹飞行安全区确定

对导弹飞行安全区进行了确切定义,分别对正常飞行弹安全区和故障飞行弹安全区进行了定量研究。在研究故障弹安全区时,从对导弹飞行安全产生的最终效果出发,对各种故障进行了科学分类,并建立了各类故障的故障方程,进而给出了导弹飞行安全区的计算模型和方法,这些模型和方法不仅符合故障飞行的物理背景,而且工程计算简单可靠。     

K8V变稳飞机飞行试验验证系统

介绍了Ｋ８Ｖ变稳飞机飞行试验验证系统的组成及功能,分别阐述了该系统的飞控软件综合验证子系统、机上地面试验数据采集与处理子系统和飞行试验数据处理分析子系统等三部分的组成、工作原理、以及在飞行试验各个阶段的不同特点和作用。通过Ｋ８Ｖ变稳飞机飞行试验的应用,表明该系统能够满足变稳飞机的软件维护、系统验收试飞及后续的应用研究,具有实时,快速,准确,自动化等优点,可为Ｋ８Ｖ变稳飞机应用研究提供重要的支持手段     

液体火箭发动机典型实验室及典型实验概述

在大量文献研究的基础上,概括介绍了目前液体火箭发动机方面的典型实验室和典型实验及几种用于液体火箭发动机喷雾、燃烧和流动测量的先进仪器。为开展新一代液体火箭发动机的实验研究和设计提供参考。     

F12/环氧复合材料力学性能研究

测定了Ｆ１２／环氧复合材料的基本力学性能,并比较了Ｆ１２纤维在单向板、强力环及薄壁容器中的纤维强度转化率。实验结果表明,Ｆ１２／环氧单向复合材料与其ＮＯＬ环的拉伸强度相近,而薄壁容器中的复合强度约为单向拉伸强度的６０％,但三种复合材料的纤维强度转化率相近,约为（７０．１±１．６）％。     

实现交互式三维参数化造型的研究

参数化设计方法是当今计算机辅助设计领域的一个热点课题,交互式三维参数化造型可以在原有模型的基础上,快速而方便地生成新的设计方案,大大提高了设计效率。本文所讨论的是通过引入特征的约束关系,利用现有的实体几何造型系统来实现交互式的三维参数化造型的方法。