一个飞机结构优化设计软件

本文根据有限元分析基础,研究薄壁结构在应力、位移、最小尺寸约束下结构最轻重量的优化设计问题。用Kuhn-Tucker(库恩-塔克)必要条件将多个位移约束简化为单一位移约束(称为最临界位移约束),建立位移约束下的优化设计准则.从而避免大批拉格朗日乘子的计算,并结合满应力优化设计准则,形成了在有效约束界面逐步逼近最优设计点的方法——包络法。用某型飞机后机身一段优化设计作为本文的实际应用,得到令人满意的结果。     

一种非链式非完整球形机器人的反步轨迹跟踪控制器(英文)

Spherical robot has good static and dynamic stability, which provides it with strong viability in hostile environment, but the lack of effective control methods has hindered its application and development. This article deals with the dynamic trajectory tracking problem of the spherical robot BHQ-2 designed for unmanned environment exploration. The dynamic model of the spherical robot is established with a simplified Boltzmann-Hamel equation, based on which a trajectory tracking controller is designed by using the back-stepping method. The convergence of the controller is proved with the Lyapunov stability theory. Numerical simulations show that with the controller the robot can globally and asymptotically track desired trajectories, both linear and circular.     

Powered-descent trajectory optimization scheme for Mars landing

This paper presents a trajectory optimization scheme for powered-descent phase of Mars landing with considerations of disturbance. Firstly, θ–D$\theta ''–''D$ method is applied to design a suboptimal control law with descent model in the absence of disturbance. Secondly, disturbance is estimated by disturbance observer, and the disturbance estimation is as feedforward compensation. Then, semi-global stability analysis of the composite controller consisting of the nonlinear suboptimal controller and the disturbance feedforward compensation is proposed. Finally, to verify the effectiveness of proposed control scheme, an application including relevant simulations on a Mars landing mission is demonstrated.     

基于并行蚁群优化的多UCAV任务分配仿真平台

多无人作战飞机(UCAV)协同作战是UCAV参与战斗的主要模式,而多UCAV任务分配是多UCAV协同作战研究的关键问题。针对现有多UCAV任务分配方法中所存在的计算量大、运行时间长等问题,提出了一种基于并行蚁群优化(ACO)的多UCAV任务分配方法。在构建多UCAV空战优势矩阵的基础上,给出了综合态势评估函数;随后阐述了基本ACO算法的基本原理和数学模型,提出了一种用并行ACO算法解决多UCAV任务分配问题的实现方法;最后基于MATLAB图形用户界面(GUI)开发了一种基于并行蚁群优化的多UCAV任务分配仿真平台。实践证明该仿真平台具有良好、开放的可扩展性,且使用方便。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

高速铣削系统稳定性动态优化新方法

考虑铣削过程中的自激振动和强迫振动,基于延迟微分方程的稳定性判定准则和强迫振动共振区的半带宽理论,提出一种铣削系统稳定性动态优化新方法.该方法通过选择切削参数和修改系统结构参数,在保证加工表面精度的前提下,获得大的稳定性材料去除率.其目标函数是材料去除率,约束条件是铣削过程稳定且非共振,动态优化变量是铣削系统的切削参数和结构参数.优化程序被阐明,实例分析结果显示,系统在稳定非共振条件下,加工时的材料去除率相比于优化前提高了18.86%.另外,为获得最大的稳定材料去除率和较好的表面精度,在铣削系统优化过程中,应同时考虑颤振稳定性和共振的影响.     

三维四向编织复合材料改进模型弹性性能计算

针对三维四向编织复合材料,在改进的矩形截面单胞模型的基础上,考虑了相邻纤维束之间的界面粘结效应,推导了单胞的几何特性与编织工艺参数之间的数学关系,并且采用ANSYS软件建立了实体有限元模型,得到了等效弹性性能参数;之后,分析了各工艺参数对弹性模量的影响规律.通过有限元计算的材料弹性性能常数与试验数据符合较好,较为真实地模拟了该材料的细观结构,对三维编织复合材料的设计和工艺具有一定的参考价值.      

液体火箭发动机性能可靠性的随机仿真方法

分析了影响液体火箭发动机性能可靠性的随机扰动来源,提出了一种基于随机仿真的发动机性能可靠性的预估方法,并以某型号液氧/煤油补燃循环上面级发动机为研究对象,采用随机仿真方法对该发动机的性能可靠性进行计算,获得了该发动机主要性能参数的分布规律和在给定偏差范围内主要性能参数的可靠性。     

我国通信卫星用的镉镍蓄电池

文中论述了镉镍单体电池中陶瓷金属封接技术、影响电池比能量的因素、隔膜的选择和镉电极对电池性能的影响。在此基础上又进一步阐述了组合电池的设计,框架式结构的产生、碳纤维材料的使用和充电控制技术。     

静叶角度调节对组合压气机性能优化机理

采用流线曲率法求解组合压气机的准三维流场,在叶片排前后缘及中间设置计算站,使用样条函数拟合流线;根据组合压气机结构特点,发展了适合其特性计算的损失、落后角模型及计算程序;将特性计算程序与导、静叶角度优化调节方案相结合,确定出不同设计转速下,导、静叶最佳调节角度组合.在90%设计转速,近最高效率点处,利用全三维的数值模拟手段分析了组合压气机导、静叶最佳角度调节前后流场结构变化.研究结果表明:导、静叶角度调节削弱了压气机叶片排中的激波强度,减少了损失,同时能抑制气流的分离,明显改善组合压气机的流场结构.