包渗法制备Cf/SiC陶瓷基复合材料MoSi2-SiC-Si防氧化涂层

采用包渗法制备了Cf/SiC陶瓷基复合材料MoSi2-SiC-Si防氧化涂层,研究了渗层同埋粉关系,包渗时间对包渗结果的影响,并对涂层防氧化性能进行了分析,结果表明：包渗法制得的涂层致密,无裂纹,涂层起到了良好的防氧化作用,1400度在空气中氧化1h后试样的质量保留率为94．1％,保留强度为294．0MPa。     

我国高性能烧蚀防热材料用酚醛树脂研究进展

从结构改性、改性剂改性两方面讨论了酚醛树脂的改性研究进展，分析了各种方法的改性机理、优缺点、应用现状和开发前景。指出改性剂改性比结构改性工艺简单、适用面广，是一个颇具前景的研究方向。     

沥青族组分对C/C复合材料热物理性能的影响

以整体碳毡为预制体、两种族组分不同煤沥青为前驱体,采用常压、高压相结合的液相浸渍/炭化技术制备C/C复合材料.研究了复合材料在200～2000℃的热物理性能.结果表明,族组分影响基体碳的微观结构,从而影响材料的热物理性能.煤沥青喹啉不溶物(QI)质量分数高(7.31%),材料的石墨化度为86.29%,真密度为2.13 g/cm3,微观结构为镶嵌型和域型结构为主,并有部分的流线型结构;QI含量低(0.02%),真密度为2.22 g/cm3,其石墨化度达到91.93%,微观结构主要以流线型为主,含有极少量的镶嵌型和域型结构.QI含量越低,复合材料真密度越大,晶体微观结构渐趋完善,石墨片层的有序度增加,石墨化度越高,材料的比热容和导热性能增强,线胀系数降低.     

TEC differences for the mid-latitude ionosphere in both sides of the longitudes with zero declination

Based on measurements of ground-based GPS station network, differences of the mid-latitude ionospheric TEC in the east and west sides of North America, South America and Oceania have been analyzed in this paper. Results show that for nearly all seasons from 2001 to 2010 and in both sides of the longitudes with zero declination, there exist systematic differences for the mid-latitude ionospheric TEC in the regions mentioned above and the features of these differences markedly depend upon the local time but less depend upon seasons and the level of solar activity. Theory analysis shows that the longitude variations of both declination and zonal thermospheric winds are one of important factors to cause differences of the mid-latitude ionospheric TEC in both sides of the longitudes with zero declination.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

基于无人机平台的机动式标校系统设计与应用

随着我国航天事业的不断发展,地面卫星测控网也日益完善,呈现出数量多、分布广、频段宽、工作体制多等特点。为提高航天测控装备标校的精度和效率,克服传统标校方式所具有的造价高、操作繁杂等缺点,研制了一套车载机动式、基于无人机(UAVs)平台的航天测控装备标校系统。该系统采用实时载波相位差分定位(RTK)技术,配备多类高度集成小型化目标载荷,可对地面统一测控、雷达和光电装备进行精度鉴定以及日常进行大动态范围标校和训练等工作。首先,介绍了系统的工作原理、系统组成及精度鉴定数据处理流程;其次,基于外场实验,给出了该系统的鉴定效果;最后,相较于目前测试性能单一的标校系统,该系统具有集成度高、机动性强、覆盖频段广、可完成性能实验多等优点,有更好的使用和推广价值。     

基于PowerPC硬核的片上组合导航计算机设计

为了满足微小型组合导航系统体积小、功耗低、精度高等方面的要求,根据新的嵌入式系统开发理念,通过软硬件协同设计将整个组合导航计算机系统集成在一片内嵌PowerPC微处理器的FPGA芯片上,实现了SoPC设计。利用FPGA内部的资源实现了组合导航系统的硬件平台,并设计了运行在该硬件平台上的底层驱动程序和组合导航软件。测试结果表明系统满足设计要求。     

技术成熟度评价方法及其在交会对接任务中的应用

介绍了技术成熟度等级和评价的概念,简述了技术成熟度评价在国外航天工程中的应用情况,提出了航天工程技术成熟度评价标准,包括开展技术成熟度评价的目的、技术成熟度的详细定义及其内涵,并以技术成熟度等级五级为例,给出了具有可操作性的评价细则以及实施要点,通过交会对接任务中运载火箭评价应用实例对技术成熟度评价的应用进行了说明。     

Phase Transformation and Microstructure of Ti50Ni48-xFe2Ndx Shape Memory Alloys

The influences of rare earth element Nd on the phase transformation and the microstructure of Ti₅₀Ni_48−xFe₂Nd_x shape memory alloys are investigated by means of electrical resistivity, optical microscopy, electron probe microanalyzer, and X-ray diffraction. The results show that TiNiFe alloys with different Nd contents exhibit two-step martensitic transformation. The start temperature of martensitic transformation increases sharply from 212 K to 267 K when 0.1 at.% Nd is added in, and then decreases gradually if Nd content further increases. The microstructure of TiNiFeNd quaternary alloys consists of TiNi matrix, Ti₂Ni second phase, and Nd₃Ni intermetallic compound. The spherical Nd₃Ni precipitate-particles evenly disperse in the matrix.     

细晶铸造对K418合金拉伸性能的影响

测试了不同温度下细晶铸造和普通铸造Ｋ４１８合金的拉伸性能。结果表明，细晶铸造明显改善了合金的极限位伸强度和屈服强度，室温和６００℃的合金拉伸强度和晶粒平均直径符合Ｈａｌｌ－Ｐｅｔｃｈ关系。