A-TIG焊的研究现状和发展趋势

活性焊接技术还需要从焊接的前处理工艺、焊接规范、焊后的热处理以及焊接接头的性能等方面与常规TIG焊接进行详尽的对比,得到常用不同材料A-TIG焊接的稳定的工艺参数,并在实际工程应用的研究方面进行进一步系统研究。     

铸就品牌创造奇迹——本刊总编辑刘柱对话北京旋极信息技术股份有限公司副总裁蔡厚富先生

<正>近年来,旋极股份凭借自身的技术优势,除了为民用研发机构、民用大型企业提供了大量的产品和技术服务,最突出的贡献就是积极参与国防科技工业建设,为航空、航天、兵器等国防军工单位提供产品和服务。为我国的航天载人工程、探月工程等国防众多关键性项目提供了完整的软件工程解决方案,堪称高科技民营企业参与军品研发和配套建     

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Monocular Vision-based Two-stage Iterative Algorithm for Relative Position and Attitude Estimation of Docking Spacecraft

Visual sensors are used to measure the relative state of the chaser spacecraft to the target spacecraft during close range rendezvous phases. This article proposes a two-stage iterative algorithm based on an inverse projection ray approach to address the relative position and attitude estimation by using feature points and monocular vision. It consists of two stages: absolute orientation and depth recovery. In the first stage, Umeyama's algorithm is used to fit the three-dimensional (3D) model set and estimate the 3D point set while in the second stage, the depths of the observed feature points are estimated. This procedure is repeated until the result converges. Moreover, the effectiveness and convergence of the proposed algorithm are verified through theoretical analysis and mathematical simulation.     

Surface Recrystallization in Nickel Base Single Crystal Superalloy DD6

The samples of single crystal superalloy DD6 are grit blasted and then heat treated either with the standard heat treatment procedure or in the temperature range of 1 000-1 250 °C for 4-16 h at vacuum atmosphere, then the recrystallization behavior of DD6 alloy is investigated. The results show that the equiaxed recrystallization grains form in the γ phase region where the as-cast γ′ phases have been dissolved completely, and cellular recrystallization forms in the region where the as-cast γ′ phases have been dissolved partially. The cellular recrystallization area consists of cellular grains, and the cellular grain consists of cubic γ′ phase, lamellar γ′ phase and γ+γ′ The coexistence of the equiaxed recrystallization zones and cellular recrystallization zones is a recrystallized characteristic of the cold worked single crystal samples which are heat treated at a temperature lower than the solution temperature. When the heating temperature is higher than 1 150 °C, with the increase of heat treating temperature, the equiaxed recrystallization zone expands, whereas the cellular recrystallization zone shrinks. All the deformed regions are consumed by equiaxed recrystallization after annealing at solution temperature.     

NASA大型民用倾转旋翼机进展研究

倾转旋翼机是一种结合固定翼飞机和旋翼飞机双重优势的新型飞机,它具有速度快、油耗低、垂直起降等特点。在波音和贝尔公司联合研制的军用倾转旋翼机取得成功后,NASA试图在相关技术的基础上研制出一种90座、航程约为1200nmile、速度约为600km/h的新型先进民用倾转旋翼支线飞机,进而取代现役固定翼支线飞机。通过系统地搜集和科学地分析,明晰了NASA大型民用倾转旋翼机项目的内容、进展、风险和影响并对ARJ21支线项目提出早期预警。     

非均匀栅距对轴流压气机流动影响的数值研究

本文进行了非均匀栅距叶片排的轴流式压气机流场数值研究,进口导叶采用了不同的非均匀栅距结构,探讨了不同工作状态下对压气机性能及动叶非定常气动力的影响。数值研究中采用LU-SGS隐式解法与双时间方法相结合,求解圆柱面二维流动的雷诺平均非定常N-S方程。数值研究的结果表明,进口导叶非均匀栅距结构对压气机气动性能影响不大,但对动叶表面受到的非定常气动力有一定影响。采用不同的非均匀栅距进口导流叶片排结构型式,动叶表面的非定常气动力的分布是不同的。不同工作状态下的计算结果显示,即使采用相同的非均匀栅距结构,非定常气动力的分布特性也是不相同的。     

多重网格法求二元跨声速流在一种半自适应网格上的欧拉解

本文采用MacCormack两步显式格式,用有限体积法求解了二元跨声速欧拉流。推导了物面边界条件,采用了特征远场边界条件及远场环量修正。利用保角变换方法生成O型贴体网格,并修改得到了一种在激波处局部加密的半自适应贴体网格。采用多重网格及焓阻尼加速收敛技术计算了NACA0012翼型的跨声速气动特性,得到了十分满意的收敛过程和计算结果。     

粒子云侵蚀问题实验研究中动能通量模拟的意义

本文首先将粒子云侵蚀条件下的驻点表面后退分解为无粒子烧蚀部分、粒子云引起的烧蚀增量部分和粒子撞击物面引起的直接侵蚀部分。然后研究了表面能量平衡关系,给出了粒子云引起的烧蚀增量表达式。最后分三类讨论粒子与飞行器的碰撞:(1)完全弹性碰撞(不符合实际);(2)完全非弹性碰撞;(3)部分弹性碰撞。对于后两种碰撞,本文分析了动能通量模拟适用的条件。     

撞击平板的动力响应计算和实验研究

本文采用16节点立体等参元,进行了冲击速度为10～20m/s时的平板动力响应数值分析。程序中考虑了结构的大变形,采用全拉格朗日描述法,时间离散使用了纽马克法。文中分别对LY12CZ和PMMA两种材料平板的动力响应计算结果和试验结果作了比较。提出用HopkinsonBar装置测定平板在硬撞击下撞击总耦合载荷及撞击点挠度随撞击时间的分布关系。同时文中提供了上述两种材料的动态力学性能参数,由这些参数可以认为PMMA为应变率敏感材料,在高速撞击下呈现“脆化”现象,而LY12CZ则为应变率不相关材料,在冲击载荷下呈现良好的塑性变形特性。