Implications of X-ray Observations for Electron Acceleration and Propagation in Solar Flares

High-energy X-rays and ??-rays from solar flares were discovered just over fifty years ago. Since that time, the standard for the interpretation of spatially integrated flare X-ray spectra at energies above several tens of keV has been the collisional thick-target model. After the launch of the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in early 2002, X-ray spectra and images have been of sufficient quality to allow a greater focus on the energetic electrons responsible for the X-ray emission, including their origin and their interactions with the flare plasma and magnetic field. The result has been new insights into the flaring process, as well as more quantitative models for both electron acceleration and propagation, and for the flare environment with which the electrons interact. In this article we review our current understanding of electron acceleration, energy loss, and propagation in flares. Implications of these new results for the collisional thick-target model, for general flare models, and for future flare studies are discussed.     

环控系统减少引气量和降低燃油代偿损失研究

随着能源问题越来越突出,降低环控系统燃油代偿损失显得越来越重要。针对这个问题,综述了当前应用研究中降低燃油代偿的不同方法,并重点对闭式循环制冷系统和考虑载荷因子的引气系统在减少引气量和降低燃油代偿损失方面进行了探讨。     

复合材料机尾罩减重设计

根据复合材料层压板及夹层结构设计原则提出了某飞机机尾罩复合材料设计方案,结合复合材料强度计算方法进行有限元分析及强度校核。分析结果表明:在满足静强度的前提下,与金属机尾罩相比,复合材料机尾罩重量减少28.4%。     

电连接器接点焊接工艺研究

针对航天产品电连接器接点焊点与引线断裂失效问题,分析了焊接过程中助焊剂、焊料、焊接工具和防护套等对接点焊接质量的影响。结合实践经验,提出相关工作参数和材料的选取原则,确定了生产中焊接技术的质量控制点。     

基于强度约束的叶片榫头参数化设计

针对榫头的设计要求,介绍了榫头的设计方法和过程.以榫头重量最轻和满足静强度约束为基点,确定榫头的控制参数,实现了人机交互的榫头参数化设计.     

碳纤维增强树脂基复合材料中激光脉冲能量对超声L波的影响

利用不同激光脉冲与碳纤维树脂基复合材料相互作用产生的瞬态热效应激发超声纵波(L波),分析激光脉冲能量对L波的影响.试验结果表明,激励声波的幅度直接与脉冲的能量相关,在高能量区的纵波幅度明显比在低能量区的大,缺陷的存在明显影响L波的存在和幅度.     

运用低自由度协同优化的机翼结构气动多学科设计优化

 为了解决协同优化方法(CO)协调困难和计算量过大的问题,提出了低自由度协同优化方法(LDFCO)。LDFCO的系统级优化通过调整共享设计变量和辅助设计变量,使系统目标最优,并满足一致性约束条件。子系统优化通过调整局部设计变量,使子系统目标最优,并满足局部约束条件。子系统目标有2种形式：最小化本子系统的一致性约束函数和直接与系统目标有关的状态变量的加权和,或最小化一种不同于前者的一致性约束函数。着重研究了如何利用常规LDFCO/V1和基于代理模型的LDFCO/V1求解机翼的气动/结构多学科设计优化问题,并与CO方法进行了对比,结果表明常规LDFCO/V1和基于代理模型的LDFCO/V1都能成功地应用到机翼的多学科设计优化中,验证了LDFCO/V1的可行性和有效性。     

基于最短路径的SCI网络拓扑结构研究

 从航空电子系统的需求出发,对可扩展一致性接口(SCI)网络的拓扑结构进行了最短路径（跳数）研究。利用图论中的邻接矩阵变换方法,根据航空电子系统中SCI节点端口数的限制及SCI网络的小环组合结构的特点,对SCI推荐的网格形和蝶形两种网络进行了平均最小跳数的计算和分析,得出了SCI网络中小环方向的改变对平均最小跳数有影响的结论,并得到了该两种网络结构中平均最小跳数最少的拓扑形式。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.