TC11钛合金的组织及塑性与其断裂韧性及裂纹扩展速率的关系

研究了TCll合金的组织及拉伸塑性(ψ)与断裂韧性(K_(IC)及裂纹扩展(da/dN)的关系。指明:K_(IC)及da/dN与ψ的关系取决于合金的组织类型。对片状组织及等轴组织进行了具体分析。     

Application of Gram-Schmidt algorithm to fully adaptive arrays

The Gram-Schmidt orthogonalization (GSO) algorithm has excellent numerical performance and is readily applicable to systolic implementations such as in a field of adaptive cancellation systems. A modified GSO algorithm for a fully adaptive array is proposed and computer simulations show that the proposed algorithm gives superior performance. A systolic implementation of the proposed GSO algorithm for fully adaptive array is presented. A feedback mode GSO algorithm for use with analog weights is also presented and has been shown to have excellent performance in the presence of weight errors     

超声速自由剪切层流动的数值模拟和理论分析

本文从二维完全Ｎ－Ｓ方程出发，采用ＮＮＤ２Ｍ差分格式，计算了超声速自由剪切层流场，并且研究了上游扰动在剪切层内的传播规律。在数值模拟的基础上对流动涡结构进行了分析。     

Robust algorithm for combating look direction error problems

A simple and fast zero tracking algorithm for adaptive arrays with large look direction errors is presented and investigated. Basically, the algorithm is based on adjusting the complex zeroes of a power inversion array in a time-multiplexed manner to track all the sources in the environment. To preserve the desired signal which is supposed to be closest to the look direction of 0°, the algorithm removes the zero with the shortest distance to e^j0 so that the directional response consists of only nulls steered at the jammers. When compared with the least mean square (LMS) algorithm employing zeroth and first-order look direction constraints, the new algorithm has about the same implementation complexity, is considerably faster, and possesses a much better signal-to-noise ratio (SNR) performance when the look direction is erroneous     

Neural controllers for systems with unknown dynamics

This study presents a methodology for specifying a neural controller for a system about which no a priori model information is available. The neural design presumes that a finite duration input/output (I/O) histogram on the system is available. The design procedure extracts from the histogram sufficient information to specify the neural feedback controller. The resultant controller will drive the system along a general output reference profile (unknown during the design). The resultant controller also exhibits the capability of disturbance rejection and the capacity to stabilize unstable plants     

用FoxBase实现超文本多媒体技术飞机主客仓空调故障诊断系统

本文通过一个应用系统的编制过程，阐述了用数据库技术实现超文本多媒体技术的方法。     

小批量工序控制的研究

Shewhart工序控制图的实施是基于大量数据的统计规律性。在小批量工序控制场合,这种常规工序控制技术失效。小批量工序控制已有的控制技术有:目标图,比例图。前者要求所组合各类数据的方差相同;后者则要求所组合的各类数据的期望和方差成比例。这严格限制了目标图和比例图的使用范围。本文研究小批量工序控制的统计原理和实现方法。首先提出小批量数据组合的同分布原理;研究实现这一原理的标准变换方法,建立小批量标准变换控制图,并通过仿真分析评价标准变换图的有效性和检出能力。并对标准变换图进行实证分析;最后指出进一步研究的问题。     

关于改进“连续突风设计准则”动力学分析方法的建议

本文建议用最坏确定性输入分析(WDI)来取代现用的功率谱密度分析(PSD),作为连续突风设计准则的动力学基础。WDI 分析通过研究一个等概率族中的最坏确定性输入来研究系统的随机响应。对于定常线性系统,WDI 法给出与PSD 法严格一致的结果。但新法给出的是最坏情况并带有时间信息,同时还能处理非定常与非线性问题。采用 WDI 分析以取代 PSD 分析无需改变现用的判据和参数甚至计算程序,就能大大扩大设计准则的应用范围。因此,本建议不仅对于航空的发展有重要意义而且易于实施。     

直升机旋翼试验台数据采集系统的改进与设计

本文详细介绍了直升机旋翼试验台数据采集系统的功能，硬件配置以及软件设计方法。     

凸轮检测任选基准选择方法之探讨

运用“升程变化率”理论证明“敏感点”是凸轮检测最佳基准,推导出了凸轮检测起始转角计算公式,介绍了在凸轮检查仪上以“敏感点”为基准确定凸轮检测起始转角的操作过程和技巧。