高室压脉冲推力器设计与实验研究

为了检验高室压脉冲推力器的设计并掌握液体N2O／酒精推进剂的点火燃烧规律,进行了实验研究。可移动喷注器的动密封采用O型圈结构,推进剂的流动通道既能保证充填时推进剂的流通,又能保证挤压时不会有回流。冷试结果表明密封效果良好。测定了系统的热试时序,实现了稳态条件下的点火燃烧,燃烧室压力为2．58MPa。由于液体N2O的饱和蒸汽压较高,容易蒸发,积存在燃烧室内的蒸气造成点火压力峰比较高。     

基于优化的蜂窝板有限元模型修正

蜂窝板具有较高的比强度和比刚度,在航空航天领域得到广泛应用。用三明治等效方法计算蜂窝板等效材料参数,在MSC.Patran中建立有限元模型计算蜂窝板基频,通过分析设计变量和目标函数在NASTRAN中对蜂窝板基频进行优化,利用优化结果确定等效剪切弹性模量计算公式中修正系数γ并重新计算修正后模型基频,以试验所测基频值为标准对蜂窝板有限元模型进行修正。修正后模型计算基频值与实测值之间的偏差明显减小,证实了模型修正的有效性。     

泡沫铝合金镀镍工艺研究

本文研究了在高硅铸铝制备的泡沫铝合金样品上镀镍工艺,提出了一种确定泡沫铝合金表面积的方法。讨论了主盐、还原剂、络合剂、缓冲剂等配方主要成份和ｐＨ 值、温度等工艺条件对化学镀镍的沉积速度和镀层质量的影响,优化了前处理方法,从而得到了适合于泡沫铝合金的镀镍工艺。     

Evaluation of the Terrestrial Albedo Applied to Some Scientific Missions

Using the Earth albedo model and the orbital dynamics model developed as part of the First Look Project (Fast Initial In-Orbit Identification of Scientific Satellites) the terrestrial albedo is evaluated considering the orbits of some scientific missions as Gravity Probe B, MICROSCOPE and STEP. The model of the Earth albedo is based on the reflectivity data measured by NASA’s Earth Probe satellite, which is part of the TOMS project (Total Ozone Mapping Spectrometer). The reflectivity data are available daily, on line at the TOMS website, and they fluctuate because of changes in clouds and ice coverage and seasonal changes. The data resolution partitions the Earth surface into a number of cells. The incident irradiance on each cell is used to calculate total radiant flux from the cell. With the radiant flux from each cell, the irradiance at the satellite is calculated.     

通用化测控应答机的设计

文章介绍了测控应答机的现状及研究背景，并对研制中的困难及今后的发展需求进行了分析，提出了通用化测控应答机的设计方案及关键技术，可供通用化测控应答机设计和批量生产参考。     

频域盲源分离的非圆信号推广

作为盲源分离（BSS）问题的最有效解决方法之一,独立分量分析（ICA）算法可以分为时域和频域算法两类.将时域盲源分离的快速算法推广到频域,通过在频域中应用非圆信号的伪协方差矩阵,推导出一个新的固定点算法来解决线性瞬时混合的非圆信号盲源分离（BNSS）问题.仿真实验验证了该算法的有效性.     

CCSDS在我国航天领域的应用展望

CCSDS(空间数据系统咨询委员会)建议有利于增强测控系统互联互通互支持能力,满足未来航天任务对空间信息高速传输及灵活高效信息调度机制的要求,应当作为我国构建天地一体化信息网络的首选标准。提出了加强顶层设计、循序渐进地推进CCSDS建议在我国实现工程化应用的总体思路,并提出在应用过程中应当注重创新任务操作模式、关注信息安全、深化关键技术研究与验证。     

脚尖数据的研究及其分析

大部分步态研究者将注意力投入到臀部和膝盖关节的角度变化所形成的步态特征,脚的步态特征关注还较少。针对这个问题深入研究了脚的一些特征,提取了脚尖数据进行分析,并对脚尖的坐标进行变换得到时域、频域及其他信息,在中科院数据库NLPR上进行试验和研究,表明脚尖的数据可以较好的区分男女性,甚至是不同的个体。脚尖数据的表示包含了较多的属性信息,有利于步态识别的进一步研究。     

参与式案例教学法在《安全管理实务》中的应用

结合教学实践,针对安全管理实务课程内容和特点,提出参与式案例教学方法。该方法给学生提供了一个宽松、平等、积极的环境,有利于提高学生参与教学的积极性,有助于学生在参与过程中灵活运用所学知识、技能,有助于提高学生解决实际问题的能力和综合素质,培养团队合作意识,提高就业竞争力。     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.